• 제목/요약/키워드: Electrical Powered

검색결과 228건 처리시간 0.029초

PEDOT:PSS 및 PVDF 기반의 유-무기 열전 필름으로 제작된 플렉서블 열전 에너지 하베스터의 발전 성능 평가 (Evaluation of Output Performance of Flexible Thermoelectric Energy Harvester Made of Organic-Inorganic Thermoelectric Films Based on PEDOT:PSS and PVDF Matrix)

  • 나유진;박귀일
    • 한국재료학회지
    • /
    • 제33권7호
    • /
    • pp.295-301
    • /
    • 2023
  • Thermoelectric (TE) energy harvesting, which converts available thermal resources into electrical energy, is attracting significant attention, as it facilitates wireless and self-powered electronics. Recently, as demand for portable/wearable electronic devices and sensors increases, organic-inorganic TE films with polymeric matrix are being studied to realize flexible thermoelectric energy harvesters (f-TEHs). Here, we developed flexible organic-inorganic TE films with p-type Bi0.5Sb1.5Te3 powder and polymeric matrices such as poly(3,4-eethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) and poly (vinylidene fluoride) (PVDF). The fabricated TE films with a PEDOT:PSS matrix and 1 wt% of multi-walled carbon nanotube (MWCNT) exhibited a power factor value of 3.96 µW·m-1·K-2 which is about 2.8 times higher than that of PVDF-based TE film. We also fabricated f-TEHs using both types of TE films and investigated the TE output performance. The f-TEH made of PEDOT:PSS-based TE films harvested the maximum load voltage of 3.4 mV, with a load current of 17.4 µA, and output power of 15.7 nW at a temperature difference of 25 K, whereas the f-TEH with PVDF-based TE films generated values of 0.6 mV, 3.3 µA, and 0.54 nW. This study will broaden the fields of the research on methods to improve TE efficiency and the development of flexible organic-inorganic TE films and f-TEH.

무선 체온 모니터기 아키텍처 하드웨어 개발 (Development of Hardware for the Architecture of A Remote Vital Sign Monitor)

  • 장동욱;장성환;정병조;조현섭
    • 한국산학기술학회논문지
    • /
    • 제11권7호
    • /
    • pp.2549-2558
    • /
    • 2010
  • 무선 체온 모니터기는 무선으로 체온을 모니터 하기 위해 설계된 건강관리 시스템이다. 무선 체온 모니터기는 낮은 가격과 손쉬운 사용방법으로 병원 장치와 비교할만한 정확도와 몇몇 특성들을 제공한다. 무선 체온 모니터기는 밴드 파트와 모니터 파트로 구성되어 있다. 밴드 파트와 모니터 파트 모두 2.4GHz 직접 시퀀스 확산 스펙트럼 라디오가 내장되어 있는 칩콘2430, 일명 CC2430라는 마이크로 칩으로 사용한다. 이 CC2430은 무선 체온 모니터기가 집안 100피트 반경까지 상호 작동할 수 있게 해준다. 간단한 사용자 환경은 사용자로 하여금 손쉽게 고온과 저온의 한계점을 세팅할 수 있게 되어있다. 만약 사용자의 체온이 고온과 저온의 한계점을 넘어섰을 때 알람이 울리게 되어 있다. 알람은 저전압 오디오 증폭기와 스피커에 연결되어 작동되게 되어있다. 정확한 체온을 계산하기 위해 무선 체온 모니터기는 반드시 정확한 온도 검출장치를 사용해야만 한다. GE Sensing에서 선택된 서미스터는 온도 측정의 예민함과 정확함을 모두 만족시킨다. LCD 화면은 길이 64.5mm 폭 16.4mm의 백라이트 기능을 가추고 있으며 이 기능은 사용자가 어두운 환경이나 밝은 환경에서도 적어도 3피트 거리에서 화면을 모니터 할 수 있게 해준다.

스마트 시티용 IoT/LPWA 기반 저전력 태양광 패널 모니터링 시스템에 관한 연구 (A Study on IoT/LPWA-based Low Power Solar Panel Monitoring System for Smart City)

  • 팜민쭝;비나야감 마리아판;차재상
    • 한국ITS학회 논문지
    • /
    • 제18권1호
    • /
    • pp.74-82
    • /
    • 2019
  • 4차 산업혁명을 통해 지능형 연결 사회를 기반으로 한 스마트 시티가 형성되고 있다. 스마트 시티에서 태양 에너지를 비롯한 신재생 에너지의 사용이 증가하고 있으나, 신재생 에너지의 모니터링 및 관리의 어려움으로 인한 시스템 수요가 증가하고 있다. 또한 환경 및 물리적 요인에 대한 데이터를 수집하고 모니터링하기 위한 무선 센서네트워크 기반 IoT 기술이 접목되고 있으나, 실시간 측정을 위한 안정적인 전원 공급이 필수적인 상황이다. 이에 본 논문에서는 LoRaWan을 비롯한 IoT 기술 기반의 스마트 시티에 적용할 수 있는 효율적인 태양 에너지 기반 전력 관리 기법에 대하여 제안하였으며, 이를 기반으로 태양광 패널 시스템의 오동작 방지 및 모니터링을 수행할 수 있다. 제안한 기술을 통해 태양광 패널 시스템에서 생성된 전력을 최대로 출력하여 각 그리드에 분배할 수 있으며, Simulink 기반 시스템 모델링과 실시간 에뮬레이션을 기반으로 효율성을 입증하였다.

전기자동차용 고신뢰성 파워모듈 패키징 기술 (Power Module Packaging Technology with Extended Reliability for Electric Vehicle Applications)

  • 윤정원;방정환;고용호;유세훈;김준기;이창우
    • 마이크로전자및패키징학회지
    • /
    • 제21권4호
    • /
    • pp.1-13
    • /
    • 2014
  • The paper gives an overview of the concepts, basic requirements, and trends regarding packaging technologies of power modules in hybrid (HEV) and electric vehicles (EV). Power electronics is gaining more and more importance in the automotive sector due to the slow but steady progress of introducing partially or even fully electric powered vehicles. The demands for power electronic devices and systems are manifold, and concerns besides aspects such as energy efficiency, cooling and costs especially robustness and lifetime issues. Higher operation temperatures and the current density increase of new IGBT (Insulated Gate Bipolar Transistor) generations make it more and more complicated to meet the quality requirements for power electronic modules. Especially the increasing heat dissipation inside the silicon (Si) leads to maximum operation temperatures of nearly $200^{\circ}C$. As a result new packaging technologies are needed to face the demands of power modules in the future. Wide-band gap (WBG) semiconductors such as silicon carbide (SiC) or gallium nitride (GaN) have the potential to considerably enhance the energy efficiency and to reduce the weight of power electronic systems in EVs due to their improved electrical and thermal properties in comparison to Si based solutions. In this paper, we will introduce various package materials, advanced packaging technologies, heat dissipation and thermal management of advanced power modules with extended reliability for EV applications. In addition, SiC and GaN based WBG power modules will be introduced.

DEVELOPMENT OF A PERSIMMON HARVESTING SYSTEM

  • Kim, S. M.;Park, S. J.;Kim, C. S.;Kim, M. H.;Lee, C. H.;J. Y. Rhee
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
    • /
    • pp.472-479
    • /
    • 2000
  • A persimmon harvesting vehicle that can be operated in hilly orchards as well as a manipulator that can be used to harvest persimmons located in remote positions in the trees were designed and developed. The vehicle could be operated with keeping balanced position in an inclined field and its working platform could be moved up and down easy to approach fruits in a remote region with the aids of a hydraulic and a electrical and electronics systems. The weight of the vehicle was 927 kg and the center of gravity was located at 427 mm to the inner side from the center of a right driving caterpillar, 607 mm to a rear axle from the center of a front axle, and 562 mm to upward from ground. The automatic level control sensor for leveling the working platform was activated within 14.5 ∼ 16.5 degrees of slope variation. The total length of the manipulator was 1.39 m and weight is 975 g. It was powered by a 12 V geared motor to detach persimmon fruits with a rotational force. The gripper was made of plastic and rubber to increase a frictional force. In a performance evaluation test, static tipping angle, dynamic tipping angle toward front side when the vehicle was moving downward, climbing angle, driving speed of the vehicle were measured or calculated. In persimmon harvesting tests 24.9% of yield was increased by hand picking with the aid of the vehicle and additional 7% of yield were increased when the manipulator was used. Therefore, 99010 of total possible yield was achievable when both of the vehicle and the manipulator were used for the manual persimmon harvesting. Increase in 22.5% of total yield was achieved with the manipulator only.

  • PDF

소프트웨어 품질향상을 위한 소스코드 기반의 테스트 케이스 자동 생성에 관한 연구 (A Study on the Automatic Generation of Test Case Based on Source Code for Quality Improvement)

  • 손웅진;이승호
    • 전기전자학회논문지
    • /
    • 제19권2호
    • /
    • pp.186-192
    • /
    • 2015
  • 본 논문에서는 소프트웨어 개발 과정에서 소프트웨어의 품질향상에 필요한 소스코드의 API를 기반으로 테스트 케이스를 자동으로 생성할 수 있는 기법을 제안한다. 제안된 기법은 Doxygen 오픈소스 툴을 이용한 소스코드 분석 과정, 분석된 결과를 이용한 API 사양 정의 과정, 테스트 디자인 생성 과정, Pairwise Test 기법을 적용한 테스트 케이스 생성 과정 등의 4가지 과정으로 구성된다. Doxygen 오픈소스 툴을 이용한 소스코드 분석 과정은 소스코드의 API 정보인 API 명, 입력 파라미터, 리턴 파라미터 정보 등을 추출하는 단계이다. 분석된 결과를 이용한 API 사양 정의 과정은 추출한 API 정보를 바탕으로 SQLite 데이터베이스를 이용하여 테스트 케이스 생성에 필요한 API 정보들을 데이터베이스화하여 정의하는 단계이다. 테스트 디자인 생성 과정은 정의된 API를 기반으로 입력 파라미터, 리턴 파라미터의 임계치 설정, 제약사항 설정 등을 통해 시나리오를 디자인하여 데이터베이스로 구성하는 단계이다. Pairwise Test 기법을 적용한 테스트 케이스 생성 과정은 테스트 디자인 정보를 바탕으로 Pairwise 조합 기법을 적용하여 실제 테스트 케이스를 생성하여 데이터베이스로 구성하는 단계이다. 제안된 기법의 효율성을 평가하기 위하여 기존의 명세서 기반의 테스트 케이스 생성 방법과 비교한 결과 비슷한 시간 내에 훨씬 더 많은 테스트 케이스가 생성되며, 명세 기반 기법으로는 불가능한 소스코드에 대한 기능 검증도 가능하여 소스코드내 결함 위치도 확인할 수 있다. 따라서 사람의 인력을 통한 수작업에 의존적으로 진행하였던 소프트웨어 개발 품질 향상 과정을 소스코드의 API를 기반으로 자동으로 테스트 케이스를 생성함으로써, 노동력 절감 및 제품 개발 시간 등을 단축 할 수 있으리라 기대된다.

리튬이온 배터리를 적용한 실내용 전동휠체어 주행특성 분석 (Analysis of driving characteristics of electric wheelchair for indoor driving using lithium-ion battery)

  • 김영필;함헌주;홍성희;고석철
    • 한국산학기술학회논문지
    • /
    • 제21권12호
    • /
    • pp.857-866
    • /
    • 2020
  • '이동'이란 사람들이 매 순간 행동하고, 타인과 교류하며 특정 목적을 달성하는 '장소'의 확장 개념으로 이동에 불편함을 느끼는 사회적 교통약자에게 있어 이동보조수단인 휠체어는 신체적·정신적 삶의 질을 향상하는데 아주 큰 영향을 발휘한다. 이러한 휠체어는 수동식 휠체어와 전동식 휠체어로 구분되는데, 수동식 휠체어는 이용자의 팔과 손의 힘으로 앞으로 추진하게 된다. 하지만 전동식 휠체어는 배터리를 통해 모터에 전기에너지를 공급 해 주고, 모터의 회전에 의해 앞으로 추진하게 된다. 전동휠체어는 주로 실외활동을 중점으로 개발되고 있으나 최근에는 일상생활의 주 공간인 실내용 이동보조수단에 대한 개발 요구가 증가하게됨에 따라 실내용 전동휠체어 개발 또한 활발하게 이루어지고 있다. 실내용 이동보조수단의 경우 공간의 특성상 단거리를 반복 주행하므로 본 연구에서는 전동휠체어의 단거리 주행에 따른 리튬이온배터리의 주행특성을 확인하고, 연속주행의 리튬이온배터리 주행특성을 비교분석하였다. 단거리 주행의 경우 리튬이온배터리의 방전종지전압 도달 시 까지 5초 주행 1초 정지를 반복수행하였다. 리튬이온 배터리를 적용한 실내용 전동휠체어의 주행특성을 분석한 결과 실내 이동을 고려한 단거리 주행시험의 경우 연속주행보다 주행시간이 2.8% 짧아진 것을 확인하였다. 실내용 전동휠체어의 회전모터에 인가 된 전류의 경우 실내 이동을 고려한 단거리 주행이 연속주행 보다 15.4% 높게 나타난 것을 확인하였다.

THE CURRENT STATUS OF BIOMEDICAL ENGINEERING IN THE USA

  • Webster, John G.
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1992년도 춘계학술대회
    • /
    • pp.27-47
    • /
    • 1992
  • Engineers have developed new instruments that aid in diagnosis and therapy Ultrasonic imaging has provided a nondamaging method of imaging internal organs. A complex transducer emits ultrasonic waves at many angles and reconstructs a map of internal anatomy and also velocities of blood in vessels. Fast computed tomography permits reconstruction of the 3-dimensional anatomy and perfusion of the heart at 20-Hz rates. Positron emission tomography uses certain isotopes that produce positrons that react with electrons to simultaneously emit two gamma rays in opposite directions. It locates the region of origin by using a ring of discrete scintillation detectors, each in electronic coincidence with an opposing detector. In magnetic resonance imaging, the patient is placed in a very strong magnetic field. The precessing of the hydrogen atoms is perturbed by an interrogating field to yield two-dimensional images of soft tissue having exceptional clarity. As an alternative to radiology image processing, film archiving, and retrieval, picture archiving and communication systems (PACS) are being implemented. Images from computed radiography, magnetic resonance imaging (MRI), nuclear medicine, and ultrasound are digitized, transmitted, and stored in computers for retrieval at distributed work stations. In electrical impedance tomography, electrodes are placed around the thorax. 50-kHz current is injected between two electrodes and voltages are measured on all other electrodes. A computer processes the data to yield an image of the resistivity of a 2-dimensional slice of the thorax. During fetal monitoring, a corkscrew electrode is screwed into the fetal scalp to measure the fetal electrocardiogram. Correlations with uterine contractions yield information on the status of the fetus during delivery To measure cardiac output by thermodilution, cold saline is injected into the right atrium. A thermistor in the right pulmonary artery yields temperature measurements, from which we can calculate cardiac output. In impedance cardiography, we measure the changes in electrical impedance as the heart ejects blood into the arteries. Motion artifacts are large, so signal averaging is useful during monitoring. An intraarterial blood gas monitoring system permits monitoring in real time. Light is sent down optical fibers inserted into the radial artery, where it is absorbed by dyes, which reemit the light at a different wavelength. The emitted light travels up optical fibers where an external instrument determines O2, CO2, and pH. Therapeutic devices include the electrosurgical unit. A high-frequency electric arc is drawn between the knife and the tissue. The arc cuts and the heat coagulates, thus preventing blood loss. Hyperthermia has demonstrated antitumor effects in patients in whom all conventional modes of therapy have failed. Methods of raising tumor temperature include focused ultrasound, radio-frequency power through needles, or microwaves. When the heart stops pumping, we use the defibrillator to restore normal pumping. A brief, high-current pulse through the heart synchronizes all cardiac fibers to restore normal rhythm. When the cardiac rhythm is too slow, we implant the cardiac pacemaker. An electrode within the heart stimulates the cardiac muscle to contract at the normal rate. When the cardiac valves are narrowed or leak, we implant an artificial valve. Silicone rubber and Teflon are used for biocompatibility. Artificial hearts powered by pneumatic hoses have been implanted in humans. However, the quality of life gradually degrades, and death ensues. When kidney stones develop, lithotripsy is used. A spark creates a pressure wave, which is focused on the stone and fragments it. The pieces pass out normally. When kidneys fail, the blood is cleansed during hemodialysis. Urea passes through a porous membrane to a dialysate bath to lower its concentration in the blood. The blind are able to read by scanning the Optacon with their fingertips. A camera scans letters and converts them to an array of vibrating pins. The deaf are able to hear using a cochlear implant. A microphone detects sound and divides it into frequency bands. 22 electrodes within the cochlea stimulate the acoustic the acoustic nerve to provide sound patterns. For those who have lost muscle function in the limbs, researchers are implanting electrodes to stimulate the muscle. Sensors in the legs and arms feed back signals to a computer that coordinates the stimulators to provide limb motion. For those with high spinal cord injury, a puff and sip switch can control a computer and permit the disabled person operate the computer and communicate with the outside world.

  • PDF