• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.477-479
• /
• 2000

This paper presents an analysis which compares the effectiveness of different temporary safety grounding methods on working overhead distribution system. The analysis studied direct energization at fault conditions with seven scenarios. The results show that the scenario, single point safety grounding on the working pole with brackets Pairs spaced 2 km apart on both side of a work site is safest grounding method. This can be used to evaluate lineman safety on a overhead distribution systems in Korea.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.483-485
• /
• 2000

This paper presents the operation technology and the remote monitoring system of distribution pole transformer. Especially, this system uses CDMA wireless data communication network as media which is serviced on a national scale. It has four major components such as sensor for measuring the secondary voltage and currents of distribution transformer, CDMA wireless modem for data modulating/demodulating, communication media for sending/receiving of data, and PC server for monitoring the results of sensing or computing information. This paper also describes the configuration of each component's functions with its development process.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.527-529
• /
• 2005

한국전력공사는 전남 해남군 및 제주도 제주시에 직류송전방식의 HVDC 설비를 '98. 03. 준공 운영 중이다. HVDC(High Voltage Direct Current)는 영국 GEC-Alstom의 150MW$\times$2 Pole 변환설비 및 프랑스 Alcatel사의 101km 해저케이블 2회선으로 구성되어 제주도 전력수요의 40%를 담당, 안정적 전력 공급과 발전 연료비 절감에 기여하고 있다. 본 논문은 변환설비 운영 중 해저케이블 1회선 고장 발생에 대비한 해수 귀로용 전극 설비의 기능유지에 적절한 구조물개선과 보수비용 절감을 위한 방법 및 운영 개선 방안에 대하여 고찰하였다.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.647-649
• /
• 2005

가공배전계통의 주상변압기에는 직격뢰나 유도뢰에 의해 고압측이나 저압측으로부터 뇌과전압이 침입할 수 있고. 이러한 경우 침입단은 물론, 상대단에도 과전압이 나타날 수 있어, 주상변압기 자체와 고압 및 저압계통에 영향을 미치게 되므로, 주상변압기의 뇌과전압 전달특성을 파악하는 것은 절연설계와 절연협조에 있어 매우 중요한 자료가 된다. 본 논문에서는 실제 선로와 같은 구성과 규모의 실증 배전선로에서, 주상변압기에 임펄스전압이 침입한 경우의 변압기 양단에 나타나는 과전압에 패한 실증결과의 예를 소개하였다.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.554-556
• /
• 2005

Distribution Automation System (DAS) will provide supervision and remote control of switches and reclosers such as pole pounted switches and pad-mounted switchgears on high voltage distribution line. Kepco had developed basic function such as remote monitoring, remote control, remote measuring and remote setting at first. As a next step, Kepco has been developed diverse application programs such as single line diagram drawing program, relay coordination program, feeder reconfiguration program, over load elimination program, bad data detection program, section load management program, fault processing program and so on. Kepco is examining to develop more powerful functions for special specification of foreign distribution automation system. This paper explains what is the target for overseas DAS market.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.694-696
• /
• 2005

Although DC ground resistance is a good index of grounding performance for grounding electrodes, it does not reflect the grounding performance during transient state. Besides, impulse ground impedance, which is defined by a ratio of the peak value of transient ground potential rise to the peak value of impulse current, cannot be an absolute index due to its dependence on impulse current shape. In this paper, ground impedance characteristics of ground electrodes has been measured in frequency domain ranging from 1 Hz to hundreds of kHz. Equivalent circuit models and transfer function models of the ground rod have been identified from the measured values of ground impedance in frequency domain.

• Proceedings of the KIEE Conference
• /
• 1998.11c
• /
• pp.976-978
• /
• 1998

In this paper, we designed basic concept and structure of bypassing device which promoted the activity of low voltage line-fuse, when it perceived the too small short-fault current to activate line-fuse which located at the between secondary of pole transformer and home immediately. And we study displacement of bypass contact and electromagnetic force caused by the short-fault current by the basic experiment to understand the basic characteristic of bypassing movements.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.7
• /
• pp.592-598
• /
• 2013

In this paper, a small, lightweight smartphone-controlled riding robot is developed. Also, in this study, a smartphone with a jog shuttle mode for consideration of user convenience is proposed to make a small, lightweight riding robot. As well, a compass sensor is used to compensate for the mechanical characteristics of motors mounted on the riding robot. The riding robot is controlled by the interface of a drag-based jog shuttle in the smartphone, instead of a mechanical controller. For a personal riding robot, if the smartphone is used as a controller instead of a handle or a pole, it reduces its size, weight, and cost to a great extent. Thus, the riding robot can be used in indoor spaces such as offices for moving or a train or bus station and an airport for scouting, or hospital for disabilities. Experimental results show that the riding robot is easily and conveniently controlled by the proposed smartphone interface based on Android.

• Journal of Power Electronics
• /
• v.10 no.1
• /
• pp.43-50
• /
• 2010

This paper proposes a new harmonic elimination PWM (HEPWM) scheme for voltage source inverters (VSI) based on the curve fittings of certain polynomials functions. The resulting equations to calculate the switching angle of the HEPWM require only the addition and multiplication processes; therefore any number of harmonics to be eliminated and the fundamental amplitude of the pole switching waveform (NP1) can be controlled on-line. An extensive angle error analysis is carried out to determine the accuracy of the algorithm in comparison to the exact solution. To verify the workability of the technique, an experimental single phase VSI is constructed. The algorithm is implemented on a VSI using a 16-bit microprocessor. The results obtained from the test rig are compared to the theoretical prediction and the results of the MATLAB simulations.

• 전기의세계
• /
• v.28 no.3
• /
• pp.65-71
• /
• 1979

This paper examines the reasonable winding arrangements of designing tapped winding capacitor motors to used in two voltage sources. The approach of this paper is based partly on a hybrid equivalent circuit of a single phase induction motor, together with an experimental method by sample machines. In results, the distribution of etra and main windings ia the stator is to be balanced in each magnetic pole and in order to have the same torque output characteristics for two different voltage sources, the extra/main winding ratio is to be adjusted. Experimental results obtaired with sample macines of about 1/8 hp output rating are used with analysis to predict the favorable winding conditions.