• 대한전기학회논문지
• /
• 제40권2호
• /
• pp.217-223
• /
• 1991

Most common applications of neural networks to control problems are the automatic motor controls using the artificial perceptual function. These control mechanisms are similar to those of the intelligent and pattern recognition control of an adaptive method frequently performed by the animate nature. In this paper, the pole-balancing problem is selected as the control object and an actual cart-pole controller is implemented by a computer interfacing and demonstrated as motor control using the reinforcement learning rule. In the experiment, given a change of the main parameters of cart-pole dynamics, a comparison is made between the LQR scheme and neural network method. The neural network method exhibits a more effecftive control action in a real situation having a large uncertainty than the LQR scheme.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권9호
• /
• pp.454-459
• /
• 2003

Conventional integral-slot design in permanent magnet(PM) motor tends to have a high cogging torque and large end turns, which contribute to copper losses. The fractional-slot design is effective compared to integral-slot design in the cogging torque and electromotive force(EMF) waveform. The effectiveness of fractional slot can be maximized by selecting optimal pole to slot ratio. This paper presents the effect of pole to slot ratio on the cogging torque and EMF waveform in the PM motor with fractional-slot. The effectiveness of the proposed designs has been confirmed by comparing waveform of EMF. cogging torque and torque ripple between conventional and new models.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.395-398
• /
• 2000

In this study mechanical and environment ability of FRP pole for a distribution line about high strength and good insulation properties. The basic filament winding process creates a helical winding pattern. In mechanical analysis of splice with mechanical fastened joint it is important to evaluate a critical load of faster having maximum stress. It is also present a result of several examples to compare this with analytical one. On repair design this finite element method will be used as basis. The influence of environmental factors, such as elevated temperatures, high humidity, and corrosive fluids, and ultraviolet(UV) rays, upon the performance of polymeric matrix composite is of concern in many applications.

• 전기학회논문지
• /
• 제67권6호
• /
• pp.702-707
• /
• 2018

In case of Lighting occurs in Domestic combined distribution line, normally the voltage for the neutral line increase dramatically. General connection for underground cable is bundled common earth type so the lightning over voltage increase at the concentric-neutral line is not big enough to give impact on cable sheath. But in case of Non bundled common earth type it is necessary to analyze the phenomena on cable sheath caused by lightening overvoltage. Especially pole and cable joint are the core factor to consider. In this paper concrete pole and cable joint were evaluated in case of Non bundled common earth type combined distribution Line. EMTP simulation model has been designed and several case study were made. Also several experimental test were made to verify the simulation result.

• 전기학회논문지
• /
• 제57권4호
• /
• pp.589-595
• /
• 2008

Detent force of a permanent magnet linear motor(PMLSM) consist of cogging and drag forces, and should be minimized for high precision control purpose applications. This paper shows that the cogging force can be reduced effectively by employing 9 pole 10 slot structure. The drag force is minimized by optimizing the total length and shape of the exterior teeth of armature core simultaneously by using($1+{\lambda}$) evolution strategy coupled with response surface method. After optimization, the optimized PMLSM is proven to reduce 95% and 92.6% of the cogging and total detent forces, respectively, and give 12% and 6.4% higher Back-emf and thrust force, respectively, compared with a conventional 12 pole 9 slot structure under the same condition. Additionally, Simulation results by the proposed optimum design are verified by the experiment results.

• 조명전기설비학회논문지
• /
• 제20권8호
• /
• pp.80-87
• /
• 2006

본 논문에서는 3차원 FEM을 이용하여 Claw pole stoning motor의 특성을 해석하였다. Claw pole stewing motor는 구조상 z-축 방향으로 자화가 발생하고 모델의 특성상 3차원 FEM해석이 필수적이다. 해석 시간을 고려해 볼 때 목적하고자 하는 성능을 갖는 모터 설계 시 시간을 효율적으로 줄이기 위한 방법 중 하나는 해석 대상의 개수를 줄이는 것이다. 이에 본 논문에서는 실험계획법(Design of Experiments)을 이용하여 Claw pole stewing motor의 해석 및 설계 시 중요 변수인 영구자석, 폴형상, 권선수의 설계 변수를 설정하여 이 설계변수의 조합으로 나오는 해석 모델의 개수를 최소화하고 이렇게 줄어든 최적의 모델을 선정하여 3차원 FEM으로 해석하여 특성을 살펴보았다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제4B권2호
• /
• pp.47-53
• /
• 2004

The salient pole rotor type single phase SRM (switched reluctance motor) uses radial and axial direction magnetic flux simultaneously. Therefore, the output power per unit volume is very high and the shaft length is shorter than other types of SRMs with the same output. Furthermore, it can be manufactured with low cost owing to its simple structure and driving circuit. The prototype was designed using the theory of the traditional rotating machine and 3D FEM analysis. On this paper, the experiment apparatus, which includes the fabricated prototype in previous researches, was fabricated to measure the current and voltage of the prototype. Then the flux linkage, inductance and magnetic co-energy were calculated using the experimental results. Finally, the measured magnetic co-energy was compared with the simulated magnetic co-energy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.399-402
• /
• 1988

In this paper, the relationship between stability and gain band-width product (GB) is clear ed by evaluating the feedback gain in the buck-boost switching regulator. Especially, considering the effect of the right-half-plane pole on the stability, we found available region of GB on the stability with the one pole compensation for the feedback circuit.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.355-359
• /
• 1989

An inverted pendulum is made practically and controlled by optimal controller and pole placement controller. An IBM PC/XT plays a part of the controller. The control algorithm is implemented with C language. An integrator is added to the controller to solve the high frequency problem. Experiment is performed according to the results of simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.51-54
• /
• 1990

A parametrization for a linear system is presented to design a direct model reference adaptive pole placement controler. This parametrized model is one of the structured nonminimal models. The exponentially weighted least-squres algorithm is employed to estimate the control parameters. The direct adaptive controller has the exponential weighting properties by the proposed method of selecting the characteristic polynomials of the sensitivity function filters in connection with the reference models.