• Title/Summary/Keyword: Electrical Equipment

검색결과 2,793건 처리시간 0.036초

순천시의 생활폐기물 발생량 예측 및 재활용시설의 용량산정에 관한 연구 (A study on the physico-chemical characteristics of municipal solid wastes generated in the sunchon city)

  • 허관;문옥란;왕승호
    • 유기물자원화
    • /
    • 제9권4호
    • /
    • pp.125-134
    • /
    • 2001
  • 순천시 생활계폐기물의 배출특성을 제시하고 장래 폐기물대책을 수립하는 기본적인 자료로 정보를 제공하고자 폐기물별 자원화시설의 용량을 산정하고 재활용시설의 운영관리 및 제반폐기물정책 수립에 활용하도록 하기 위해서 조사분석하여 다음과 같은 결과를 얻었다. 일반주택의 배출량원단위는 0.50kg/인${\cdot}$일로 배출량은 41.9톤/일, 공동주택의 배출량원단위는 0.45kg/인${\cdot}$일로 배출량은 55.5톤/일, 읍 면지역의 배출량원단위는 0.22kg/인${\cdot}$일로 배출량은 13.5톤/일로 나타나 주택지역의 생활계폐기물 배출량은 110.9톤/일이다. 재래시장의 배출량원단위는 1.85kg/상가 일로 배출량은 5,400kg/일이며, 소규모점포의 배출량원단위는 2.03kg/상가 일로 배출량은 25,101kg/일로 나타나 상가지역의 생활계폐기물 배출량은 30,501kg/일이다. 공장지역에서 배출되는 사업장생활계폐기물은 1일 평균 8.3톤, 학교와 병원 및 업무지역에서 배출되는 생활계폐기물의 1일 평균배출량은 각각 7.2kg과 3.0kg 및 6.6kg이다. 생활폐기물 중에서 음식물쓰레기는 평균 63.4톤/일 배출되었으며, 소각대상 가연성폐기물은 126.9톤/일 배출되었다. 음식물쓰레기처리시설의 내구년도를 약 5년(2006년도)으로 계획하면 처리대상량은 1일 42.4톤이 예상되며, 저부하 운전이나 고장보수로 인한 가동중지 등의 문제를 고려하여 처리능력을 25톤/일${\times}$2계열로 설치하는 것이 효율적일 것으로 판단된다. 소각처리시설의 내구년도를 약 10년(2011년도)으로 계획하면 처리대상량은 1일 150톤/일이 예상되며, 저부하 운전이나 고장보수로 인한 소각작업 중지 등의 문제를 고려하여 처리능력을 80톤/일${\times}$2계열로 설치하는 것이 효율적일 것으로 판단된다.

  • PDF

일체형 방사선 피폭 방호 소방관 인명구조 경보기의 임베디드 보드 개발 (Development of Embedded Board for Integrated Radiation Exposure Protection Fireman's Life-saving Alarm)

  • 이영지;이주현;이승호
    • 전기전자학회논문지
    • /
    • 제23권4호
    • /
    • pp.1461-1464
    • /
    • 2019
  • 본 논문에서는 위치추적과 방사선 측정이 가능한 일체형 방사선 피폭 방호 소방관 인명구조 경보기를 위한 임베디드 보드 개발을 제안한다. 제안하는 방사선 피폭 방호 소방관 인명구조 경보기의 임베디드 보드는 신호 처리부, 통신부, 전원부, 메인 제어부 등으로 구성된다. 신호 처리부에서는 차폐설계, 노이즈 저감 기술 및 전자파 차감 기술 등을 적용한다. 통신부에서는 WiFi 방식을 사용하여 통신하도록 설계한다. 메인 제어부에서는 전력 소모를 최소한으로 줄이고 작고 밀도가 높으면서도 낮은 발열성을 통하여 높은 고성능 시스템을 구성한다. 일체형 방사선 피폭 방호 소방관 인명구조 경보기를 위한 임베디드 보드는 재난 및 화재현장 등 열악한 환경에 노출되어 운영하는 장비이므로 방수와 내열성을 고려한 외형도 설계 및 제작을 한다. 제안된 일체형 방사선 피폭 방호 소방관 인명구조 경보기를 위한 임베디드 보드의 효율을 판단하기 위하여 공인시험기관에서 실험하였다. 방수 등급은 소방관용 장비의 특성 상 재해 현장에서 물에 의한 침수 시에도 안정적인 성능을 유지할 수 있는 IP67 등급을 달성하였다, 동작 온도는 재해현장에서의 폭넓은 환경변화에 대응할 수 있는 -10℃~50℃의 범위에서 측정이 되었다. 배터리 수명은 붕괴사고 등의 비상 재난 상황에 대처할 수 있는 1회 충전 후 144시간 사용 가능함이 측정되었다. PCB를 포함한 최대 통신 거리는 재난 상황 시 지휘통제 차량과의 직선거리에서 기존의 50m보다 넓은 범위인 54.2m에서 작동하는 것이 측정되었다. 따라서 일체형 방사선 피폭 방호 소방관 인명구조 경보기를 위한 임베디드 보드의 그 효용성이 입증되었다.

The Contribution of Innovation Activity to the Output Growth of Emerging Economies: The Case of Kazakhstan

  • Smagulova, Sholpan;Mukasheva, Saltanat
    • 유통과학연구
    • /
    • 제10권7호
    • /
    • pp.33-41
    • /
    • 2012
  • The purpose of this study is to analyse the state of the energy industry and to determine the efficiency of its functioning on the basis of energy conservation principle and application of innovative technologies aimed at improving the ecological modernisation of agricultural sectors of Kazakhstan. The research methodology is based on an integrated approach of financial and economic evaluation of the effectiveness of the investment project, based on calculation of elasticity, total costs and profitability, as well as on comparative, graphical and system analysis. The current stage is characterised by widely spread restructuring processes of electric power industry in many countries through introduction of new technical installations of energy facilities and increased government regulation in order to enhance the competitive advantage of electricity market. Electric power industry features a considerable value of creating areas. For example, by providing scientific and technical progress, it crucially affects not only the development but also the territorial organisation of productive forces, first of all the industry. In modern life, more than 90% of electricity and heat is obtained by Kazakhstan's economy by consuming non-renewable energy resources: different types of coal, oil shale, oil, natural gas and peat. Therefore, it is significant to ensure energy security, as the country faces a rapid fall back to mono-gas structure of fuel and energy balance. However, energy resources in Kazakhstan are spread very unevenly. Its main supplies are concentrated in northern and central parts of the republic, and the majority of consumers of electrical power live in the southern and western areas of the country. However, energy plays an important role in the economy of industrial production and to a large extent determines the level of competitive advantage, which is a promising condition for implementation of energy-saving and environmentally friendly technologies. In these circumstances, issues of modernisation and reforms of this sector in Kazakhstan gain more and more importance, which can be seen in the example of economically sustainable solutions of a large local monopoly company, significant savings in capital investment and efficiency of implementation of an investment project. A major disadvantage of development of electricity distribution companies is the prevalence of very high moral and physical amortisation of equipment, reaching almost 70-80%, which significantly increases the operating costs. For example, while an investment of 12 billion tenge was planned in 2009 in this branch, in 2012 it is planned to invest more than 17 billion. Obviously, despite the absolute increase, the rate of investment is still quite low, as the total demand in this area is at least more than 250 billion tenge. In addition, industrial infrastructure, including the objects of Kazakhstan electric power industry, have a tangible adverse impact on the environment. Thus, since there is a large number of various power projects that are sources of electromagnetic radiation, the environment is deteriorated. Hence, there is a need to optimise the efficiency of the organisation and management of production activities of energy companies, to create and implement new technologies, to ensure safe production and provide solutions to various environmental aspects. These are key strategic factors to ensure success of the modern energy sector of Kazakhstan. The contribution of authors in developing the scope of this subject is explained by the fact that there was not enough research in the energy sector, especially in the view of ecological modernisation. This work differs from similar works in Kazakhstan in the way that the proposed method of investment project calculation takes into account the time factor, which compares the current and future value of profit from the implementation of innovative equipment that helps to bring it to actual practise. The feasibility of writing this article lies in the need of forming a public policy in the industrial sector, including optimising the structure of energy disbursing rate, which complies with the terms of future modernised development of the domestic energy sector.

  • PDF

유해폐기물 생애 전주기 흐름 기반 정보 관리 전략 (An Information Management Strategy Over Entire Life Cycles of Hazardous Waste Streams)

  • 이상훈;김정은
    • 청정기술
    • /
    • 제26권3호
    • /
    • pp.228-236
    • /
    • 2020
  • 우리나라는 제조업 중심의 경제구조상 각종 유해폐기물이 발생하고 있으나 매립후보지가 적고 소각처리의 경우 미세먼지의 발생에 대한 우려가 커서 전통적인 폐기물 처리가 쉽지 않다. 더구나 최근에는 개발도상국의 유해폐기물 수입규제, 배달문화의 보편화와 보건위기사태까지 겹쳐 폐기물 수거 및 적체 문제가 심화되고 있다. 본 연구에서는 특히 최근 폐기물 국제 규제 관련 추세에 맞춘 국내 폐기물 정보관리 전략을 제시하려 하였다. 그 내용은 (1) 국내 유해폐기물 분류 코드와 바젤협약 등 국제적 코드와의 정합성을 제고하려는 노력을 지속해야 하며 (2) 폐전자제품내 희토류 등 저함량 성분의 혼합 유해성을 고려해야 하고 (3) 유해폐기물 전주기 위해성을 기반으로 하는 관리가 수행되어야 한다. 또한 (4) 올바로시스템, 화학물질배출·이동량 정보공개시스템 및 폐기물 수출입 자료 등을 서로 연동하여 폐기물 상세 흐름 정보를 구축하고 (5) 센서와 지리정보 시스템 등을 활용하여 폐기물 흐름의 감시와 불법오염지역의 예측이 필요하다. 마지막으로 (6) 청정기술과 전과정평가 등으로 처리/재활용의 최적대안을 선정/수행하는 것이 바람직하다.

항공기 낙뢰 전산 시뮬레이션 및 보호시스템 설계 (Computational Simulation of Lightning Strike on Aircraft and Design of Lightning Protection System)

  • 김종준;백상태;송동건;명노신
    • 한국항공우주학회지
    • /
    • 제44권12호
    • /
    • pp.1071-1086
    • /
    • 2016
  • 항공기는 결빙, 난기류, 낙뢰 등 환경적 요인에 의해 안전성을 위협받는다. 그 중 낙뢰는 항공기에 강한 전류와 전압을 유입시켜 고온의 열과 자기장을 발생시키므로 항공기 안정성에 큰 위협이 된다. 본 연구에서는 낙뢰의 발생원리 및 항공기 낙뢰 피격 메카니즘을 설명하고 항공기에 대한 낙뢰의 직접, 간접 영향성을 다룬다. 먼저 항공기 낙뢰 지침서인 ARP를 분석하여 항공기 낙뢰모사와 부착위치에 대한 분석을 진행하였으며, 이를 전산 시뮬레이션에 적용하였다. 또한 ABAQUS 소프트웨어를 활용한 열적, 전기적 시뮬레이션을 통해 연료탱크의 낙뢰 영향성 분석 및 낙뢰보호시스템 설계를 진행하였다. 그리고 Maxwell 방정식에 기초한 EMA3D 소프트웨어를 활용하여 항공기 전기체의 전류 흐름에 대한 전산수치해석을 진행하였다.

전파환경에 의한 DGPS 충주 기준국의 성능저하 분석 (Analysis on the Performance Degradations of Chung-Ju DGPS Reference Station by Radio Environment)

  • 박슬기;한영훈;박상현;최용권;이상정
    • 한국정보통신학회논문지
    • /
    • 제20권9호
    • /
    • pp.1822-1829
    • /
    • 2016
  • GPS 항법의 정확도 향상과 무결성 정보의 필요성으로, 국내에 DGPS를 구축하였다. 최근에는 측위정보를 해양에서 뿐만 아니라 육상에서도 활용할 수 있도록 제공하고 있다. 그러나 2015년도 충주 기준국의 성능저하 문제점을 파악하기 위하여 영도기준국과 함께 가시성과 전파환경을 조사하였다. 영도기준국의 경우, 가시성과 전파환경이 기준국 기준에 만족하였다. 그러나 충주기준국의 경우, 가시성은 막음각 7도 이하로 장애물이 존재하여 만족하지만 전파환경에서 신호잡음은 최대 -50dBm으로 기준치인 -70dBm을 넘어가는 것을 확인하였다. 이러한 전파환경으로 인한 측정치오차를 분석하기 위하여 신호잡음등의 오차를 포함하지 않는 시차분 측정치 분석방법을 제안하였다. 2015년 12월 측정치 분석결과 충주 기준국의 경우 영도 기준국 보다 3배의 오차를 확인하였다. 이 뿐만 아니라 기준국 장비문제로 인한 측정치 성능저하를 확인하였다. 추후에는 17개소의 기준국의 측정치를 분석하여 성능검증을 진행할 예정이다.

Pulse Oximeter를 이용한 치수생활력측정 (PULSE OXIMETER AS A DIAGNOSTIC TEST OF PULP VITALITY)

  • 구본경;이제호;이종갑
    • 대한소아치과학회지
    • /
    • 제27권1호
    • /
    • pp.103-107
    • /
    • 2000
  • 치수 생활력 검사시 전통적인 방법으로 전기치수검사나 온도변화검사 등이 있다. EPT와 ice test 즉, 전기치수검사와 온도변화검사는 치아의 신경학적 반응에 의해 치아의 실활여부를 판단하는 방법으로 환자가 아동일때는 정확한 반응을 얻기가 어렵고, 환자의 주관적 반응을 판단해야 하므로 객관적이지 못하고, 소아 환자에게 좋지 못한 자극을 주어 행동 조절의 문제를 일으키며, 거짓 양성반응과 거짓 음성반응이 나을 수 있다는 등의 한계가 있다. 최근에는 전통적인 방법의 한계를 극복하려는 시도에서 혈관의 보전성을 평가하는 방법인 laser doppler flowmetry와 pulse oximeter를 이용하는 방법이 소개되고 있다. Pulse oximeter의 원리는 두 가지 종류의 파장의 빛을 귀, 손가락등 생체의 말단에 투과시켜 발산된 빛과 감지된 빛간의 두 파장의 흡수비로 산소 포화 정도를 알아내는 것으로서 이에 착안하여 또 하나의 생체 말단인 치아에 이를 적용하여 치아의 실활 여부를 판단하는 것이다. 이 보고에서는 치수 생활력 검사시 pulse oximeter의 사용 가능성에대해 검증하고 이의 임상적용에 대해 기초적 자료를 제공하고자 함을 목적으로 했는데 생활치 에서는 평균 96.3%의 산소 포화도를 실활치에서는 평균 0.0%의 산소 포화도를 얻어냄으로서 pulse oximeter가 치아의 실활여부 판단에 있어 유용한 진단도구로서의 가치가 있다는 것이 밝혀졌다.

  • PDF

PREDICTION OF PHYSICO-CHEMICAL AND TEXTURE CHARACTERISTICS OF BEEF BY NEAR INFRARED TRANSMITTANCE SPECTROSCOPY

  • Olivan, Mamen;Delaroza, Begona;Mocha, Mercedes;Martinez, Maria Jesus
    • 한국근적외분광분석학회:학술대회논문집
    • /
    • 한국근적외분광분석학회 2001년도 NIR-2001
    • /
    • pp.1256-1256
    • /
    • 2001
  • The physico-chemical and texture characteristics of meat determine the nutritional, technological and sensory quality. However, the analysis of meat quality requires expensive, laborious and time consuming analytical methods. The objective of this study was to evaluate NIR spectroscopy using transmittance for determining the moisture, fat, protein and total pigment content, the water holding capacity (WHC) and the toughness of beef meat. A total of 318 spectra were recorded from ground beef samples by a Feed Analyzer 1265 of Infratec. The samples were obtained from the Longissimus muscle of the 10$^{th}$ rib of yearling bulls, ground with an electrical chopper, vacuum packaged, aged during 7 days and frozen at -24$^{\circ}C$ until the analyses were done. Moisture content was measured by oven drying at 10$0^{\circ}C$, fat content was determined by Soxhlet extraction and protein content was estimated from nitrogen content using the Kjeldahl analysis. The total pigment content was determined by the method of Hornsey and the WHC using the method of filter paper press. The instrumental evaluation of texture (maximum load WB, maximum stress MS and toughness) was conducted in an Instron equipment with a Warner-Bratzler shearing device. This analysis was performed on a chop of 3.5 cm obtained from the longissimus of the 8$^{th}$ rib, aged during 7 days, kept frozen at -24$^{\circ}C$ and cooked before the analysis. Near infrared spectra were recorded as log 1/T (T=transmittance) at 2 nm intervals from 850 to 1050 nm using a Feed Analyzer 1265 of Infratec. Calibrations were performed with the WinISI software (vs. 1.02) using the MPLS method. To examine the effect of scatter correction o. derivation of spectra on the calibration performance, calibrations were calculated with the crude spectra or pretreated with different mathematical treatments (inverse MSC, SNVD) and/or second derivative operation. For chemical composition, the use of the scatter corrections improved the calibration statistics, in terms of lower SECV and higher $r^2$. In most of the variables, the use of the 2$^{nd}$ derivative improved the predictions, mainly when combined with the SNVD treatment. However, for predicting the texture traits, the best estimation was obtained from the crude spectrum. These results showed that the equations obtained for predicting moisture, fat and total pigments were very accurate, with $r^2$ being higher that 0.9. However, the prediction of the texture traits (WB, MS, toughness) from ground meat was poor.

  • PDF

$1980{\sim}2004$년 동안의 증시부양정책 및 증시규제정책의 실효성 (Effectiveness of Securities Market Plans, $1980{\sim}2004$)

  • 이재하;한덕희
    • 재무관리연구
    • /
    • 제23권2호
    • /
    • pp.143-170
    • /
    • 2006
  • 본 연구는 $1980{\sim}2004$년 동안 실시된 증시부양정책 및 증시규제정책의 실효성을 검증하기 위하여 단순수익률 분석, 사건연구 및 BFL검정을 통하여 증시정책 발표일 전후의 주가행태 및 주식수익률 변동성을 분석하였으며 연구의 결과는 다음과 같다. 첫째, 침체국면에 있는 증시를 부양하기 위한 증시부양정책과 과열국면에 있는 증시를 안정시키기 위한 증시규제정책의 실효성을 시장전체, 기업규모별, 업종별로 분석한 결과, 증시부양정책은 KOSPI, 대형주, 금융업, 제조업의 주가가 유의하게 상승하여 증시부양정책의 효과가 상당히 있는 것으로 나타났고 증시규제정책의 경우도 주가의 상승세가 멈추고 주가가 하락하여 증시규제정책의 효과가 있는 것으로 나타났다. 둘째, 증시정책이 시장전체에 미치는 영향에 더하여 기업규모별, 업종별로 추가적인 영향이 있는지를 분석한 결과 증시부양정책의 경우 대형주만 추가적 실효성이 있었고 증시규제정책의 경우 소형주와 전기 전자업, 유통업, 제조업이 추가적인 반응을 보였다. 셋째, BFL 검정결과 비교구간별로 증시정책 전후의 변동성이 동일한 것으로 나타남에 따라 주가를 부양하거나 진정시키기 위한 증시정책이 변동성에는 영향을 주지 않고 주식수익률에만 영향을 미치는 것으로 나타났다. 결론적으로 $1980{\sim}2004$년 동안 우리나라 증시정책이 주식시장에 대해 실효성이 어느 정도 있는 것으로 보이고 두 정책 모두 주식시장 변동성에는 달리 영향을 주지 않은 것으로 보인다.

  • PDF

LCL 필터와 PWM 정류기를 이용한 3상 유도전동기의 시뮬레이터 (Simulator for 3 Phase Induction Motor with LCL Filter and PWM Rectifier)

  • 조관열;김학원
    • 한국산학기술학회논문지
    • /
    • 제21권11호
    • /
    • pp.861-869
    • /
    • 2020
  • 대용량 유도전동기용 인버터 개발을 위한 부하 장치는 고가의 제작 비용 및 제작에 많은 시간이 필요하므로 유도전동기 및 부하 장치를 대체할 수 있는 시뮬레이터 개발에 대한 필요가 증대되고 있다. 기존의 대용량 3상 유도전동기의 인버터용 부하 시뮬레이터는 리액터와 3상 PWM 정류기를 사용하여 시험용 인버터의 전류를 제어함으로써 단지 인버터의 부하로만 작용할 뿐 유도전동기의 특성을 모사하기 어렵다. 본 논문에서는 LCL 필터와 3상 PWM 정류기를 이용하여 3상 유도전동기의 모델과 부하 특성을 모사할 수 있는 실시간 시뮬레이터를 제안한다. PWM 인버터에 흐르는 전류는 3상 유도전동기의 고정자 전류를 모사하며 LCL 필터의 인덕터에 흐르는 전류와 커패시터 전압에 의해 제어된다. LCL 필터의 커패시터 전압은 3상 유도전동기의 회전자 자속에 의해 고정자 권선에 유기되는 유도기전력을 모사하며 인덕터 전류와 PWM 정류기에 의해 제어된다. 3상 유도전동기의 회전자 전류, 고정자 및 회전자 자속, 전동기 토크, 슬립 주파수 및 회전자 속도는 인버터에 흐르는 전류와 유도전동기의 상수로부터 유도된다. MATLAB/Simulink 시뮬레이션을 통하여 제안된 3상 유도전동기용 실시간 시뮬레이터의 전기적, 기계적 모델 특성 및 벡터제어 동작을 검증하였다.