• Journal of Advanced Marine Engineering and Technology
• /
• 제39권2호
• /
• pp.179-186
• /
• 2015

In the indoor location estimation system, which has recently been actively studied, the received signal strength indicator contains a high level of noise when measuring the signal strength in the range between two nodes consisting of a receiver and a transceiver. To minimize the noise level, this paper proposes an improved adaptive smoothing filter that provides different exponential weights to the current value and previous averaged one of the data that were obtained from the nodes, because the characteristic signal attenuation of the received signal strength indicator generally has a log distribution. The proposed method can effectively decrease the noise level by using a feedback filter that can provide different weights according to the noise level of the obtained data and thus increase the accuracy in the distance and location without an additional filter such as the link quality indicator, which can verify the communication quality state to decrease the range errors in the indoor location recognition using ZigBee based on IEEE 802.15.4. For verifying the performance of the proposed improved adaptive smoothing filter, actual experiments are conducted in three indoor locations of different spatial sections. From the experimental results, it is verified that the proposed technique is superior to other techniques in range measurement.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.2089-2097
• /
• 2014

Negative corona onset characteristics of the stranded conductors based on the ultra-high voltage (UHV) corona cage were studied in the paper. Based on the corona self-sustaining criterion in extreme uneven electric fields and the secondary emission process of the photoelectrons, the corona onset calculation model in the UHV corona cage is established and the corona current tests of the single LGJ900-75, 6 bundle LGJ900-75, 8 bundle LGJ400-35 conductors in dry and rain conditions were done in the UHV corona cage, and the rain rates are 2.4 mm/h, 20 mm/h and 30 mm/h. Corona onset electric field strength is gained by E-I tangent method, and the onset electric field strength in dry condition proves that the calculation model can be used to calculate the corona onset characteristics of the bundle conductors in the UHV corona cage. A further analysis proves that: the negative corona onset voltage of the conductor increases with the bundle number and the diameter of the sub conductor, but decreases with the bundle space in the corona cage. The onset electric field strength is influenced little by bundle space and bundle number, but decreases with the increase of the diameter of the sub-conductor. The surface irregularity coefficient decreases with the rain rate.

• 공업화학
• /
• 제8권1호
• /
• pp.114-121
• /
• 1997

합성한 Polyphenylenediamine(PPD)와 2,5-dimercapto-1,3,4-thiadiazole(DMcT)을 다양한 비율로 혼합한 뒤 고분자 필름전지용 정극활물질을 제막하였다. 제막한 복합전극에 대해 SEM을 이용하여 도핑 전과 후의 표면구조의 변화를 관찰하였으며, 열적 안정성은 TGA를 이용하여 조사하였다. 또한 전기화학적 특성은 cyclic voltammetry를, 전기전도도는 dry box내에서 four-probe method를 이용하여 측정하였다. 제막한 필름의 열적 안정성은 $200^{\circ}C$ 이상이었으며, 전기전도도는 DMSO에서 제막한 후, 0.4% $LiCIO_4$로 도핑한 필름의 전기전도도가 가장 우수하였으며, 이 때의 값은 약 3S/cm이었다. 또한, 전기화학적 특성을 조사하여, DMcT가 PPD의 전기화학적 활성에 영향을 미침을 확인할 수 있었다.

• 한국진공학회지
• /
• 제11권1호
• /
• pp.1-7
• /
• 2002

RF Magnetron Sputtering 방법으로 $Ba_{0.5}Sr_{0.5}TiO_3$ 박막을 Pt/Ti/$SiO_2$/Si 기판위에 증착하였다. $Ba_{0.5}Sr_{0.5}TiO_3$ 박막 증착시 기판온도는 실온으로 고정시켜주었고, 작업 가스 유량(Ar:$O_2$)과 RF Power는 각각 90:10에서 60:40까지 그리고 50 W와 75 W로 하였다. 또한 박막 증착 후 RTA(Rapid Thermal Annealing)를 이용하여 산소분위기에서 $600^{\circ}C$로 고온 순간 열처리를 하였다. 커패시터 제작을 위해 UHV System의 E-beam evaporator를 이용하여 Pt를 증착하였다. XRD 측정을 통한 구조적 특성에서는 작업 가스 유량과 RF Power에 비해 고온 순간 열처리가 결정화에 기여도가 큼을 확인할 수 있었다. 전기적 특성에서는 RF Power가 50 W이고 열처리를 한 샘플에서 비교적 우수한 특성을 보여주었다.

• 조명전기설비학회논문지
• /
• 제18권3호
• /
• pp.27-33
• /
• 2004

우리가 생활하는 거의 모든 곳에서 발생하는 슬러지(sludge)는 악취, 토양오염 등 많은 문제점을 가지고 있으며, 대부분의 폐기물은 매립 또는 소각에 의해 처리되고 있으나 슬러지의 경우 두 가지 방법 모두 심각한 문제점을 가지고 있어, 대체 처리방법의 개발이 시급한 실정이다. 본 연구에서는 그 슬러지를 NOx제거용 촉매 펠렛(Pellet)재료로 재활용하기 위한 가능성을 타진하기 위하여 수돗물 정수장에서 발생되는 슬러지로 펠렛을 제작하여 $BaTiO_3$ 펠렛과 하이브리드 구조로 NOx제거용 플라즈마 반응기를 제작하였고, specific energy, 전압인가 방법, 슬러지의 양, 산소농도 변화에 따른 NOx제거 특성을 측정하고 슬러지 펠렛의 영향을 측정하고 분석하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.399-402
• /
• 2002

This paper is researched that electric characteristic of Digital x-ray radiography technique with changing composition ratio of Iodine. Dopant material, Iodine is evaporated with amorphous selenium. Thorugh the old papers say, doponted Iodine will be down the created trap level because of Arsenic dopant material in amorphous selenium. Arsenic material of Composition ratio in amorphous selenium is fixed with 0.3% and test sample is deposited composition of 30, 100, 300, 500, 700ppm with thermal evaporate system. Experimental measurement is performed by dark current and x-ray sensitivity in amorphous selenium based radition detector sensor. Fabricated test sample thickness is $30{\mu}m$ and injected voltage is $3{\mu}m$，$6{\mu}m$，$9{\mu}m$ to both electrode. Experimental results showed that the net charge of composition rate of 30ppm is 398.88 pc/mR/$cm^2$ very high. And increase of the Iodine composition ratio is tendency to the decrease of net charge. Doping changing composition of Iodine in amorphous selenium detector offered to basical information of amorphous selenium material.

• 한국재료학회지
• /
• 제15권8호
• /
• pp.518-520
• /
• 2005

Effects of the $O_2/Ar$ flow ratio in the sputtering process on the crystallinity, surface roughness, carrier concentration, carrier mobility, and optical properties of Al-doped ZnO thin films deposited on sapphire (001) substrates by RF magnetron sputtering were investigated. XRD spectra showed a preferred orientation along the c-axis and a minimum FWHM of the (002) XRD intensity peak for the $O_2/Ar$ flow ratio of 0.5. The (101)peak also appeared and the degree of preferred orientation decreased as the $O_2/Ar$ flow ratio increased from 0.5 to 1.0. AFM analysis results showed that the surface roughness was lowest at the $O_2/Ar$ flow ratio of 0.5 and tended to increase owing to the increase of the grain size as the $O_2/Ar$ flow ratio increased further. According to the Hall measurement results the carrier concentration and carrier mobility of the fan decreased and thus the resistivity increased as the $O_2/Ar$ flow ratio increased. The transmittance of the ZnO:Al film deposited on the glass substrate was characteristic of a standing wave. The transmittance increased as the $O_2/Ar$ flow ratio in-RF magnetron sputtering increased up to 0.5. Considering the effects of the $O_2/Ar$ flow ratio on the surface roughness, electrical resistivity and transmittance properties of the ZnO:Al film the optimum $O_2/Ar$ flow ratio was 0.5 in the RF magnetron sputter deposition of the ZnO:Al film.

• 조명전기설비학회논문지
• /
• 제28권12호
• /
• pp.1-5
• /
• 2014

Since the "Light Pollution Prevention Act" was executed, the installation of the light cutoff panel to the security lightings which caused light trespass has been increased in the local government. The light cutoff panel is effective in reducing the light trespass in term of the cost-benefit. Because the installation of the light cutoff panel is inexpensive than the change of the security lighting. But the reflected light from the surface of the light cutoff panel has been regarded as another light pollution problem to solve. Therefore, we try to improve light cutoff panel by changing the light reflectivity characteristic of the surface of the light cutoff panel. First, we laminated the surface of light cutoff panel by black powder to reduce the light reflectivity of the light cutoff panel. After the black powder lamination, the light reflectivity on the light cutoff panel improved from 85% to 5%. And we compared reflected light caused by black powder laminated light cutoff panel with the one of no surface treatment cutoff panel. The vertical illuminance was measured at 3, 6, 9m in front of the security lighting and 3, 6, 9, 12, 15, 18m in back of the security lighting to evaluate the reflected light. And the measurement height was determined of 1.5m considering the height of the 1th floor of an apartment house. In this study, we found that the reflected light from the light cutoff panel can be reduced about 90% by the black powder lamination method. The results derived from this study will be helpful to develope the various kind of light cutoff panel which minimize the adverse effect like reflected light of light cutoff panel.

• 전기학회논문지
• /
• 제63권6호
• /
• pp.758-763
• /
• 2014

These days, the advantages of DC power system are consistently stand out in korea that was a small power loss and high stability. Needs of DC power transmission technology is focused In the midst of a smart grid and environment friendly generation technology boom that is needed for next generation technology. Researches and businesses for HVDC(High Voltage Direct Current) system has been began. But, Needs of HVDC equipment and system commissioning technology are not on the rise until now. In particular, South Korea's HVDC technology is after the foot runner of advanced country and company. In addition, There is no experience for equipment verification and commissioning technology. And Experts of HVDC are rare. Who has been fully understood hardware and system as a whole, and identified all the equipment's characteristic. Recently, Academia and industry are recognized a needs of HVDC technology. But it does not received a recognition of technical value. In this paper, introduce issues when we apply the IEEE's verification method for HVDC system, especially DC current measurement system, DC CT(Direct Current Transformer), among the HVDC equipments. And Proposes remedial methods on the issue in order to recognize the necessity that was HVDC equipments's verification and commissioning technology research should be focused on.

• 전기전자학회논문지
• /
• 제25권4호
• /
• pp.607-612
• /
• 2021

본 논문에서는 종이와 동 테이프로 만든 CPW로 급전되는 UWB 모노폴 종이 안테나를 제안하고자 한다. 시뮬레이션을 통해 최적화된 안테나 설계 파라미터를 구하고, UWB 주파수 대역인 3.1-10.6 GHz에서 전방향성 방사패턴 및 2.2dBi 이상의 이득을 갖는 안테나를 설계하였다. 일반적인 A4용지와 동 테이프를 이용하여 안테나를 제작하고, 측정 결과 UWB 주파수 대역에서 -10 dB 이하의 반사손실을 만족하였고, 안테나 평면이 길이 방향으로 3mm 굽어진 경우에도 반사손실 특성이 유지됨을 확인하였다. 제안된 안테나는 웨어러블 소자로서 UWB 대역의 서비스를 제공할 수 있고, 종이에 전도성 프린트로 인쇄하여 제작하면 저렴하게 제작이 가능하므로, 물류 분야 및 일회용 단말기 등 다양한 응용 분야에서 UWB 통신용 웨어러블 안테나로 활용이 가능할 것으로 사료된다.