• 한국안전학회지
• /
• 제32권5호
• /
• pp.13-19
• /
• 2017

In this paper, study of vehicle fire cases caused by connector and power wiring of anti-lock brake system(ABS) module damage is presented. The purpose of ABS module is to improve braking and steering ability under sudden stop of the vehicle by repeatedly activating and releasing the brake with electric signal via electric control unit. The electric control unit for ABS may experience incomplete contact between power line and signal line or electrical breakdown on the printed circuit board by undergoing repetitive signal change which would consequently result in electrical heat and spark, eventually leading to automotive fire. Therefore, the purpose of this paper is to provide fundamental data by analyzing connector and power wiring of ABS module damage conducive to the precise investigation on the cause of vehicle fire.

• 한국전기전자재료학회논문지
• /
• 제16권12S호
• /
• pp.1310-1315
• /
• 2003

GIS(Gas Insulated Switchgear) is power equipment with excellent dielectric strength and is economy merit in high confidence and stability. But, because of structural characteristics, this is difficult to monitor externally and provide much loss in the event of an accident. Recently, because equipment of GIS is occurring problem of confidence used for a long time, development of diagnosis technique have been importantly recognized. therefore, measurement and analysis of PD much has been generally used for equipment of GIS. But, in case of measurement of PD at field, real trouble signals is difficult to classify noise. Accordingly, a variety of trouble conditions for DS are simulated, and detected signals are analyzed by the application of electrical and mechanical methods. For this analysis, detected signals are accumulated according to phase-magnitude with the application of induction sensor, and then we analyzed the characteristics. For the simulation experiment, we make DS for 170KV GIS and analyze the characteristics of detected signals with the application of neural network algorithm. last, we have measured DS for GIS at field, and then have analyzed detected signals.

• 제어로봇시스템학회논문지
• /
• 제19권10호
• /
• pp.936-940
• /
• 2013

As the ageing population grows around the world, the demand for electric wheelchairs, an important mobility assistance device for the disabled and elderly, is gradually increasing. Therefore, a number of studies related to intelligent wheelchairs are actively underway to improve safety and comfort for wheelchair users. However, previous collision avoidance studies for intelligent wheelchairs have concentrated on collision avoidance methods with the shortest distance and by only changing either velocity or heading angle, rather than considering the forces exerted on the user. If a collision avoidance algorithm that does not consider these forces is applied to an intelligent wheelchair, there is a possibility of an accident due to falling as wheelchair users are generally disabled and elderly people. In this paper, we propose a collision avoidance algorithm which minimizes the forces exerted on a wheelchair user by minimizing the variation of the wheelchair's velocity and heading angle when the sizes, positions, velocities, and heading angles of a wheelchair and a moving obstacle are known.

• 전기학회논문지P
• /
• 제64권1호
• /
• pp.23-28
• /
• 2015

Measuring the distances between signals in the signal space is usually determined by obtaining the ideal metric which is not easy to obtain. In this research we have investigated the scheme that measures the distances between the signals constructed with the measured voltage signals connected to electric apparatus using Kalman filter and exponential mapping. The metric is defined on the feature signals obtained via the estimation process of a Kalman filter and the mapping process using the exponential transformation. Diagnosis is on the voltage fluctuations is applied to determining whether the system is in the stable state or not due to the unexpected accidents, such as power overcharge, discharge, outages flow may be the cause of the accident. The decision making scheme evaluated with respect to the effectiveness and the degree of complication with different variances. Two methods, the Hard Limit Threshold Scheme(HLTS) and the Interval Energy Scheme(IES) are proposed and compared. In experiments the IES shows better tolerance to impulse noise than the HLTS.

• 전기학회논문지
• /
• 제60권1호
• /
• pp.85-92
• /
• 2011

Main characteristic in railroad is the guided movement of the wheel by the track through a metal-to-metal contact, conferring to the rail vehicle a single degree of freedom. There are defects such as head check, shelling, corrugation, squats etc in surface of the rail by interface between the wheel and rail. These defects bring about reducing the life-cycle of rails and track components and increasing noises. In case of bad conditions, it is possible to happen to full-scale accident such as derailment. Recently, the track capacity has been increased for increasing speed and operation efficiency. So, maintenance and indirect cost have been increased. Currently, a coating method of rail construction is proposed by using the ceramics in Korea. Rails are used as the earth in electrical railroad systems. Currently traction return current is flowed through wheels of trains. In case of rails coated, problems are caused in the contact power between wheel and coating material of spray. In this paper, electric model is presented in the AT feeding method. In case of rails coated, electric model is presented. Also, standard resistance of the ceramic is demonstrated by contact power between wheel and coating material of spray.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.277-280
• /
• 2004

As electric shock accident take place frequently, electrical safety is extremely important to prevent them. This paper describes the characteristics of electric shock. In order to examine it, an experimental apparatus including a model of a human body is fabricated and the magnitude of the voltage held by the model is measured under several conditions as follows;(1) the model is not contacted to an electric pole and a step voltage does not exist. (2) the model is not contacted to an electric pole and a step voltage exists. (3) the model is contacted to an electric pole and a step voltage does not exist (4) the model is contacted to an electric pole and a step voltage exists. As a result of the experiment it is found that the voltage held by the model depends on the step voltage as well as the voltages applied to the electric pole.

• Archives of Reconstructive Microsurgery
• /
• 제14권2호
• /
• pp.144-151
• /
• 2005

Purpose: Disaster as traffic accident, industrial disaster, high voltage electrical bum and flame burn of extremity have a destructive effect because of the involvement of deep structure. Generally, such injury may result in decreased function or loss of limb. In this study the successful use of the combined scapular/parascapular flap as microsurgical transfer to cover extensive defect of electrical and flame bum is reported. Material and Method: Between January 2000 and June 2001, the combined scapular and parascapular flap was used for the coverage of soft tissue defect for 7 patients were admitted to our department with high voltage electrical bum and flame burn. The recipient site were the wrist joint in 2 cases, the forearm in 1 case, the ankle joint in 1 case, the foot dorsum in 1 case, the heel in 1 case. Result: Flap survival was complete in all patients. The result of flap coverage for these deep wound was successful. Conclusion: The advantages of scapular/parascapular combined flap were coverage of the large defect, easy shaping of the flap to fit the required three dimensional configuration around the joint, non hair bearing skin of uniform thickness, minimal donor site morbidity.

• 식품보건융합연구
• /
• 제8권6호
• /
• pp.11-17
• /
• 2022

Emergency transport is directly related to the life of the patient, and rapid transport to the hospital is crucial. However, external environmental factors such as traffic or weather, interfere with hospital transport. In this study, we investigated the external environment affecting hospital transport time. We examined the transfer time and patient treatment time of emergency patients in an area of northern Gyeonggi-do from 2018 to 2020. Diagnosis after arrival at the hospital was used, and on-site treatment time was measured from paramedic arrival time at the scene to departure. Furthermore, we examined whether there was a correlation between the time paramedics left the scene and hospital arrival time through the reason for the delay as recorded in the emergency log. Traffic jams had the greatest impact on patient transport, while transport delays occurred due to heavy rain, but not snow. Among injured patients, electrical accidents were the most problematic in terms of on-site treatment time. This was because a lot of first aid is needed in electrical accidents. It must be necessary to mobilize two ambulances in an emergency through the expansion of infrastructure, prepare a plan for rapid transport in heavy rain, and implement strong laws against transport obstruction.

• 대한안전경영과학회지
• /
• 제24권2호
• /
• pp.33-39
• /
• 2022

In order to improve the implementation of safety and health education at the site for industrial accident prevention activities, research was conducted to minimize inconvenience and increase utilization by redesigning and developing existing education methods. To date, occupational safety and health education has been conducted without considering the general work characteristics and functional facilities (mechanical, electrical, instrumentation, chemical) of workers (mechanical: turbine, valve, pump, hydraulic system, electrical: generator, breaker, motor, etc.). In particular, plant facilities were classified as mechanical and electrical facilities to improve the methodology for industrial safety and health education for plant maintenance workers. In addition, the "One Page Education Plan" was announced as a learning case because the spread of COVID-19 infectious diseases made it impossible to reduce or control the number of people in all groups and groups. The improvement of this training method will play a major role in improving the effectiveness of safety education in power plant workplaces.

• 조명전기설비학회논문지
• /
• 제21권8호
• /
• pp.129-135
• /
• 2007

환경오염이 심한 분진 발생지역에서는 전기 사고가 자주 발생하기 때문에 전기설비에 대한 유지관리와 예방에 대한 연구가 필요하다. 특히 외부에 전기절연물이 장기간 노출되면, 쉽게 분진이 축적되고 수분, 습기 등에 의한 누설전류의 발생으로 전기사고에 이르게 된다. 따라서 본 연구에서는 분진, 염수 등에 의한 전기설비 절연재료 표면변화와 표면 누설전류를 측정하였다. 측정결과로부터 베이클라이트의 표면이 다른 재료보다 염수에 대한 영향이 심하였다. 또한 베이클라이트 표면 누설전류는 반복되는 염수 오염에 의해 증가하고 재료표면은 미소아크가 발생하고 탄화되었다. 따라서 절연물에서의 누설전류를 억제하기 위해서는 재료의 형태 및 표면 코팅 등이 변화가 필요하다.