• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_2
• /
• pp.639-648
• /
• 2023

In modern society, UAM (Urban Air Mobility) transportation system is being developed as an alternative to urban traffic congestion and environmental problems, and electric vertical take-off and landing (eVTOL) is a combination of vertical take-off and landing function and electric power. It is attracting attention as an innovative next-generation transportation method as an eco-friendly alternative that reduces noise and air pollution by providing efficient mobility within the city. Since eVTOL development requires designing and implementing airframes suitable for various mission purposes, the power system needs to be developed as a platform concept before airframe development. In this study, we empirically proposed a test bench concept equipped with a stable power supply and an efficient control system, essential in developing a power platform with a combined function in the form of a fuselage and module type specialized for various mission purposes. The proposed drivetrain platform test bench consists of a system verifying the stable take-off and landing software and a power platform adjusting the motor's thrust. It will serve as a verification system that can be developed.

• Journal of Aerospace System Engineering
• /
• v.15 no.3
• /
• pp.20-29
• /
• 2021

As the feasibility of urban air mobility (UAM) service using electric vertical take-off and landing (eVTOL) aircraft increases due to aircraft electrification, distributed propulsion, and artificial intelligence technologies, the U.S. and European aeronautical societies have been improving their certification system and regulations for the type certification of eVTOL. The improved certification system is expected to be ready in the near future, after the European Union Aviation Safety Agency (EASA) proposed the VTOL Special Condition, SC-VTOL in 2019. However, the current domestic certification system is still insufficient to properly respond to eVTOL. This study investigated the development trends of foreign eVTOL and certification systems, identified considerations to improve the domestic certification system, and proposed the measures for type certificates and type certificates validation of eVTOL based on the comparison between SC-VTOL and Korea airworthiness standards (KAS).

• Journal of Advanced Navigation Technology
• /
• v.28 no.1
• /
• pp.95-101
• /
• 2024

This paper aims to establish a reconfigurable flight simulation environment to conduct safety evaluation of various electric vertical take-off and landing (eVTOL) aircraft. Since the inceptor, aircraft dynamics model, and controller applied to each eVTOL aircraft are different, it was configured to be variable so that a simulation can be executed for each eVTOL aircraft. Test elements and performance indicators were set to perform safety evaluation of eVTOL aircraft. Ground auxiliary equipments were designed and implemented in a simulation environment according to test procedures for each test element. In addition, to analyze safety performance, a simulation flight data collection environment based on MATLAB/Simulink and a tool for safety performance analysis were implemented. Test flight and analysis were conducted in the implemented simulation environment in this paper. Finally, this study shows the environment was verified by confirming that it was performed normally.

• Journal of Advanced Navigation Technology
• /
• v.28 no.5
• /
• pp.686-697
• /
• 2024

To ensure stable urban flight of electric vertical take-off and landing(eVTOL) aircraft, securing handling qualities and stability is essential. However, clear handling qualities standards for eVTOL aircraft, which have different characteristics from conventional manned aircraft, have not yet been established. Therefore, this paper identifies handling qualities evaluation criteria suitable for eVTOL aircraft based on the handling qualities standards for manned aircraft and designs a control system that meets the predicted handling qualities criteria through evaluation. simplified vehicle operation(SVO) control laws and stability and control augmentation system(SCAS)-based control laws were applied to the lift-cruise configuration eVTOL aircraft. Using control designer's unified interface(CONDUIT), it was confirmed that the level 1 standard was met, and to validate the system, assigned handling qualities evaluation was performed using handling qualities task elements(HQTE) in an X-Plane based simulation environment, resulting in the design of a control system that ensures handling qualities.

• Progress in Superconductivity and Cryogenics
• /
• v.24 no.2
• /
• pp.27-38
• /
• 2022

Urban air mobility (UAM) has recently attracted lots of attention as a solution to urban centralization and global warming. Electric vertical take-off and landing (eVTOL) is a concept that emerges as one of the promising and clean technologies for UAM. There are two difficult challenges for eVTOL aircraft to solve. One is how to improve the weight efficiency of aircraft, and the other is how to complete long-range missions for UAM's flight scenarios. To approach these challenges, we propose a consolidated concept design of battery-fuel cell hybrid tiltrotor aircraft with a liquid hydrogen (LH₂) fuel tank. The efficiency of a battery-fuel cell hybrid powertrain system on the designed eVTOL aircraft is compared to that of a battery-only powertrain system. This paper shows how much payload can increase and the flight scenario can be improved by hybridizing the battery and fuel cell and presenting a detailed concept of a cryogenic storage tank for LH₂.

• Journal of Advanced Navigation Technology
• /
• v.24 no.2
• /
• pp.73-84
• /
• 2020

To overcome ground congestions due to growing number of cars, a lot of companies have proposed personal aerial vehicle (PAV). Among PAV, electric vertical take-off and landing (eVTOL) aircrafts capable of vertical take-off and landing with electric power are drawing attention, and their configurations vary from multicopters to tilt ducted fans. This study tries to analyze the characteristics of each eVTOL design configurations. Parasite drag was calculated using component build up method for Vahana, Aurora, Volocopter representing each eVTOL PAV type of tilt-wing, compound, and multicopter. Wetted area and induced drag was calculated using OpenVSP and XFLR5 that are aircraft design and aerodynamic analysis software. The batteries used in the eVTOL PAV was assumed as Tesla 2170 batteries and flight ranges were calculated. Also, energy consumption and maximum flight time for the given mission profile including take-off and landing, cruising segments were compared for each eVTOL.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.201-208
• /
• 2022

As around the world, ground and underground transportation capacity is reaching its limit, centering on urban areas. As urban traffic becomes congested, time and cost are astronomical, and environmental destruction caused by urban pollution is becoming increasingly serious. As a way to solve this problem, the means of flying over the air are in the spotlight as the next generation of future transportation, and the concept of urban air mobility (UAM, Urban Air Mobility) is defined as systematic planning. The development of an electric-powered vertical take-off (eVTOL) aircraft that obtains electric power through a battery using a personal aerial vehicle (PAV) as a means of transportation has accelerated. As the aircraft development of new technology aircraft in the evtol method is actively carried out, the need to prepare systems such as aircraft certification standards, pilot qualification systems, and qualification management is emerging. The Federal Aviation Administration (FAA) and the European Union Aviation Safety Agency (EASA), which lead international standards, announced new special technical conditions and temporary regulations SCVTOL-01, respectively. However, the pilot qualification system for operating the uam aircraft has not yet been clearly announced. Therefore, this paper analyzes the recently announced FAA regulations and EASA regulations to identify differences and directions in perspectives on UAMs and study the existing vertical take-off and landing aircraft (VTOL) pilot qualification system to present directions for qualification classification.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.3
• /
• pp.52-65
• /
• 2021

A large amount of time and cost is consumed due to congestions caused by an increasing number of cars which results in a lot of emissions. To overcome these problems, a new electric vertical takeoff and landing (eVTOL) aircraft is being considered. Since vertical take off and landing without a separate runway is realized and electricity is used as a power source, it could solve the saturated ground traffic congestions without emissions. In this paper, the initial sizing was performed based on the Nexus 6HX of Belltextron which is a tilt-ducted fan type. In this study, the electric propulsion system that only uses battery was implemented instead of current Nexus 6HX hybrid electric propulsion. Aerodynamic analyses were performed using OpenVSP and XFLR5. Power-to-weight ratio, wing loading, estimated weight were calculated with these analyses.

• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.77-95
• /
• 2023

In this study, the conceptual design of a tilt + stopped rotor type electric vertical take-off and landing (eVTOL) aircraft was performed using design iteration. Based on Hyundai Motor's S-A1, the mission profile was defined using the concept of urban air mobility (UAM), and configuration design and aerodynamic analysis were performed using OpenVSP and XFLR5 software. After estimating the required power for the designed eVTOL, the required performance of the battery and the maximum take-off weight (MTOW) were calculated. . It was iteratively calculated using Microsoft Excel and Visual Basic Application, and a new electric motor weight estimation formula was derived. Also, the sensitivity analyses of each design variables of an eVTOL was performed using the automated program.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.1
• /
• pp.59-66
• /
• 2022

In order to solve the problem of urban traffic congestion, Urban Air Mobility (UAM) concept using Electric Vertical Take-off and Landing (eVTOL) aircraft has been gaining popularity, and many domestic and international studies are underway. However, since these aircraft inevitably fly over densely populated areas, it is essential to ensure safety, which starts with accurately analyzing the crash risk. In this paper, the locations and impact speeds of crash are computed using six degree-of-freedom simulations of an eVTOL aircraft in a fixed-wing mode. System malfunction was modeled by a sudden loss of thrust with control surfaces being stuck during cruise. Because most of these eVTOL aircraft are still under development, a methodology of constructing a six degree-of-freedom dynamics model from generic specification is also developed. The results show that the crash locations are highly concentrated right under the aircraft within a square that has an edge length similar to the cruise altitude. Speed distribution is more complicated because almost identical crash locations can be achieved by two very different paths resulting in a large variation in the speeds.