• 제목/요약/키워드: Electric ship

검색결과 223건 처리시간 0.024초

해월(海越)송전선 하부의 선박 통항 안전성 평가에 관한 연구 (A Study on Safety Assessment for Ship Sailing under Electric Power Cable)

  • 김현종;홍태호
    • 해양환경안전학회지
    • /
    • 제13권1호
    • /
    • pp.55-60
    • /
    • 2007
  • 해월송전선의 해상고에 의하며 선박의 항로가 제한되는 해역에 있어서, 해월송전선에 관하여 현재 알 수 있는 정보는 아주 제한적인데, 주어진 정보를 토대로 송전선철탑들 사이의 임의의 위치에서도 해월송전선의 해상고를 알아낼 수 있는 방법을 제시하였다. 그리고 해월송전선의 하부를 선박이 항해할 경우의 안전성을 평가할 수 있는 방법론적 모델을 제시하였다. 실제 표본선박이 항해한 궤적을 조사하여 통계처리를 한 결과, 선박이 안전통항구간을 벗어날 확률은 약 0.00001 정도로 밝혀졌다. 따라서 네델란드 응용과학연구소의 보고서에 의한 안전기준(항만 내, 방파제 입구 부근에서는 0.0001 이하이면 안전하다고 판단.)보다 10배 정도 더 안전하다고 판단된다.

  • PDF

전기추진선의 최대추력 운항을 위한 추력손실 억제에 관한 연구 (Suppression of the Thrust Loss for the Maximum Thrust Operation in the Electric Propulsion Ship)

  • 김소연;윤영두;설승기
    • 대한조선학회논문집
    • /
    • 제44권3호
    • /
    • pp.238-247
    • /
    • 2007
  • This paper presents the thrust loss suppression algorithm in the electric propulsion ship. The thrust loss due to cavitation can be regarded as the disturbance torque. The disturbance torque is estimated by means of the disturbance observer. Considering the estimated disturbance torque, the speed reference of the propeller is modified to suppress the thrust loss. The experimental results which performed in the cavitation tunnel with electric machine operating system and its controller will be shown to verify the proposed algorithm.

선체 응력 모니터링을 위한 FBG 센서에 대한 연구 (Study on FBG Sensors for Hull Stress Monitoring)

  • 김유미;이남권;이승환;배동명;유윤식
    • 센서학회지
    • /
    • 제21권4호
    • /
    • pp.276-282
    • /
    • 2012
  • Vessels receive stress during their navigations as well as during their cargo operations. This stress may cause damages to the hull and may result in accidents. So the hull stress monitoring system(HSMS) is recommended in order to prevent these accidents. In this paper, we manufactured fiber Bragg grating(FBG) sensor and the model ship for towing tank experiments. The strain characteristics of the model ship on the water wave were measured through the towing tank experiment. The FBG sensors and electric strain gauges were attached on the connection jig, and then the characteristics of the FBG sensor were compared with those of the electric strain gauge. The strain of model ship was increased according to the increment of the amplitude of water wave. In particular, the largest strain was measured in the center of the model ship. As the wave period increased, the strain of model ship was decreased.

End-to-end system level modeling and simulation for medium-voltage DC electric ship power systems

  • Zhu, Wanlu;Shi, Jian;Abdelwahed, Sherif
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제10권1호
    • /
    • pp.37-47
    • /
    • 2018
  • Dynamic simulation is critical for electrical ship studies as it obtains the necessary information to capture and characterize system performance over the range of system operations and dynamic events such as disturbances or contingencies. However, modeling and simulation of the interactive electrical and mechanical dynamics involves setting up and solving system equations in time-domain that is typically time consuming and computationally expensive. Accurate assessment of system dynamic behaviors of interest without excessive computational overhead has become a serious concern and challenge for practical application of electrical ship design, analysis, optimization and control. This paper aims to develop a systematic approach to classify the sophisticated dynamic phenomenon encountered in electrical ship modeling and simulation practices based on the design intention and the time scale of interest. Then a novel, comprehensive, coherent, and end-to-end mathematical modeling and simulation approach has been developed for the latest Medium Voltage Direct Current (MVDC) Shipboard Power System (SPS) with the objective to effectively and efficiently capture the system behavior for ship-wide system-level studies. The accuracy and computation efficiency of the proposed approach has been evaluated and validated within the time frame of interest in the cast studies. The significance and the potential application of the proposed modeling and simulation approach are also discussed.

디지털트윈 선박 플랫폼 설계를 위한 연구 (Research on Basic Concept Design for Digital Twin Ship Platform)

  • 윤경국;김종수;전현민;임창근
    • 해양환경안전학회지
    • /
    • 제28권6호
    • /
    • pp.1086-1091
    • /
    • 2022
  • 국제해사기구(IMO, International Maritime Organization)를 중심으로 자율운항선박 도입을 대비한 해사안전 및 보안관련 국제 협약을 제정하고 있다. 국내에서도 선급 및 산업체를 중심으로 자율운항시스템 기술개발에 착수하고 있으며 연안선박에서 발생하는 사고를 줄이기 위해 연안선박을 대상으로 하는 자율운항선박 기술적용 방안 연구가 진행되고 있다. 국내외적으로 자율운항선박에 대한 관심이 크게 증가하고 있으며 실제 개발된 기술의 검증을 위한 해상실증이 본격적으로 추진되고 있다. 본 연구에서는 연안선박에 적용하기 위한 디지털트윈 기술 관련 실증선박과 육상 플랫폼(원격지원센터)의 설계를 위한 기초연구를 진행하였다. 디지털트윈 기술을 선박에 적용하기 위해 8m 소형 배터리 전기추진선박을 대상으로 선정하였으며, 선박과 육상 플랫폼 간 통신을 통해 선박 항해 및 운전 데이터가 서버시스템에 저장되고 전기추진선박의 원격제어 명령이 가능한 디지털트윈 통합 플랫폼의 기본 설계를 진행하였다. 이러한 디지털트윈 기술을 적용한 선박 성능관리, 운항 및 운영 최적화, 예지제어 등이 가능할 것으로 판단되며, 위기상황에 대응이 가능한 안전하고 경제성 있는 디지털트윈 기술의 선박적용이 가능할 것이라 사료된다.

이동식 전원공급장치 기반 전기추진차도선의 개념설계 연구 (Conceptual Design for Fully Electrified Car Ferry Powered by Removable Battery System)

  • 이준호;장동원;진송한;신승우
    • 해양환경안전학회지
    • /
    • 제27권6호
    • /
    • pp.856-866
    • /
    • 2021
  • 대기오염물질 감축에 대한 국제적인 인식이 높아짐에 따라 친환경 선박에 대한 수요가 증가하고 있어 각국에서 전기추진선박 개발을 활발하게 수행하고 있다. 현재 전기추진선박에 대해서는 주로 전기추진시스템 및 전동기 연구를 주로 수행하고 있으며, 선박 관점에서 전기추진시스템 및 배터리의 탑재를 고려한 국내 연안 차도선 개념설계 연구는 수행된 바가 없다. 본 연구에서는 배터리 차량 기반의 이동식 전원공급시스템을 주전원으로 하는 순수전기추진차도선의 개념설계 과정에서의 주요 고려사항에 대하여 검토하였다. 100척 이상의 국내 연안차도선의 제원을 분석하여, 요구사항 만족을 위한 선박의 주요제원 선정과 이동식 배터리 차량 탑재를 고려한 비손상, 손상 복원성능 검토를 수행하였고, 개념설계 과정에서 발생하는 문제의 원인분석을 통해 해결방안을 모색하였다.

전력 부하와 학습모델 기반의 전기추진선박의 배터리 연동 전력관리 알고리즘 (Battery-loaded power management algorithm of electric propulsion ship based on power load and state learning model)

  • 오지현;오진석
    • 한국정보통신학회논문지
    • /
    • 제24권9호
    • /
    • pp.1202-1208
    • /
    • 2020
  • 현재 4차 산업혁명 시대에 발맞춰서 선박 분야에서는 인공지능 요소를 접목하여 미래를 대비하여야 한다. 그리고 자율운항 선박 등장에 대한 전력관리 분야에서도 이에 대한 대응이 필요하다. 본 연구에서는 머신러닝의 DNN(Deep Neural Network)을 이용한 배터리 연동형 전력관리시스템(BLPMS, Battery Linked Power Management System) 알고리즘을 제안한다. 실험을 위하여 LabView를 통한 선박 데이터를 바탕으로 운항모드별 선박 전력소비량의 패턴을 학습하고 Python을 통해 배터리의 상태를 도출하여 발전기와 배터리의 연동의 유연성을 확인하였다. 실험의 결과 배터리의 충·방전을 통해 발전기의 저부하 운전이 감소되고, LNG의 1%의 연료소모량 감소를 통하여 경제성 및 신뢰성을 확인하였다.

PLM 통신기반 선박용 LMS 구현 (Implementation of Lamp Monitoring System(LMS) for Ship Based on PLM)

  • 임현정;양현숙;김건우;백영진;김윤식;이성근
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제31권2호
    • /
    • pp.182-189
    • /
    • 2007
  • This paper describes the implementation of control and monitoring system of ship's lamps at local area using power line communication method, power line modem(PLM). We design modem, microprocessor interface for electric power control by frequency control and analog to digital signal conversion, lamp device. PLM communication is very economical using existing electric power line unlike RS-232, RS-485 communications. We verify and confirm by experimental work that control and monitor lamp system for ship by an PLM communication.

전기추진선박의 운전조건별 전력특성 및 추진전동기 특성 비교 해석 (Characteristic Analysis of Integrated Power System and Propulsion Motor Comparison for Electric Vessels According to the Driving Condition)

  • 이상곤;정유석;정상용;이철균
    • 전기전자학회논문지
    • /
    • 제15권1호
    • /
    • pp.96-103
    • /
    • 2011
  • 본 논문에서는 발전기, 스위치보드, VFD, 추진전동기 등으로 구성된 전기추전선박의 전력 네트워크를 모델링하고, 전력조류해석과 단락전류해석을 통하여 계절별 선박 운용에 따른 전력시스템 특성 해석 및 단락사고 발생 시차단기의 용량을 선정한다. 이와 더불어 3.7MW급 유도전동기 및 영구자석형 동기전동기의 정성적, 정량적 비교 해석을 통해 전기선박 추진전동기로 적합성에 대해 추가 고찰한다.