• 한국산학기술학회논문지
• /
• 제11권11호
• /
• pp.4509-4514
• /
• 2010

본 논문에서는 전기선로전환기의 유지보수 방법을 개선하기 위해 당초 연구 개발한 선로전환기 모니터링시스템을 시험 운용한 결과 보수방법 향상 효과를 확인 할 수 있었다. 그러나 보수자가 배치되지 않은 무인 연동역의 경우 선로전환기 장애 발생 시 또는 유지보수를 위하여 현장에 출동하기 전 까지는 보수 및 점검이 불가능하였다. 이러한 문제점을 개선하기 위하여 모니터링시스템에 원격지 컴퓨터와 통신할 수 있는 제어 모듈을 내장하여 선로전환기 전환 시에 원격지 컴퓨터에서 명령하는 제어정보를 수신하고 선로전환기가 전환된 후의 표시 정보 및 특히 장애 발생시의 상태를 모니터링시스템에 표출하도록 구성하여 원격지에서 관리할 수 있도록 성능을 향상시킴으로써 장애발생시 신속한 대응 체계 구축으로 유지보수의 효율성 및 편의성이 증대 될 것으로 예상된다.

• 한국공작기계학회논문집
• /
• 제10권4호
• /
• pp.48-54
• /
• 2001

The tool wear that is developed by long-term machining in mold manufacturing with machining center makes a severe influence to the accuracy and the surface roughness. in this reason, tool-wear supervising system which has guaranteed high accuracy and high speed is needed to improve the measurement quality. Touching probe and touch sensor are widely used to measure the tool profile at on-machine measurement. In this paper, using the newly developed electric touch point measuring system, the Automatic Tool Compensation System is developed to correct the error of tool diameter resulted from the wear, and the operating method of this system is also provided.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1066-1071
• /
• 2005

This paper presents the two lossless auxiliary inductors-assisted voltage source type half bridge (single ended push pull: SEPP) series resonant high frequency inverter for induction heated fixing roller in copy and printing machines. The simple high-frequency inverter treated here can completely achieve stable zero current soft switching (ZCS) commutation for wide its output power regulation ranges and load variations under its constant high frequency pulse density modulation (PDM) scheme. Its transient and steady state operating principle is originally described and discussed for a constant high-frequency PDM control strategy under a stable ZCS operation commutation, together with its output effective power regulation characteristics-based on the high frequency PDM strategy. The experimental operating performances of this voltage source SEPP ZCS-PDM series resonant high frequency inverter using IGBTs are illustrated as compared with computer simulation results and experimental ones. Its power losses analysis and actual efficiency are evaluated and discussed on the basis of simulation and experimental results. The feasible effectiveness of this high frequency inverter appliance implemented here is proved from the practical point of view.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.977-980
• /
• 1993

The technique to design high performance small motors has been based on experimental data, which results from lots of cost, experience and time in manufacturing. Recently, as high-performance computer appears, many engineers use numerical methods to design and analyze electric machine. Since, the step motor which has very small air gap(0.02-0.05mm) is different from other electric machine in its structure. The shape of rotor teeth and stator teeth influence seriously on the torque characteristics. And it is operated over magnetic saturation point. Therefore, the design of step motor needs to solve nonlinear problem and to calculate magnetic field precisely. In this paper, we solve nonlinear problem by employing Finite Element Method and obtain torque-displacement characteristics for the design of step motor. We also manufacture VR step motor according to the obtained results, and measure some torque characteristics. Through comparing calculated results with experimental results, it is verified that FEM is very useful to design step motor, and the motor designed by our technique is improved in its step accuracy.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.855-856
• /
• 2006

Inductance can be defined as several kinds of slops on the B-H curve, and at is classified into apparent, effective, incremental inductances, etc. In many research cases, its calculation and measurement are partially dealt. However it is hard to find the clear explanation of the inductance in the voltage equation of PM machines, and even its relationship with those classified inductances in the view point of design and characteristics analysis. Moreover some previous definition of inductance can not be used for the inductance of coils in PM machines. Therefore, in this paper the inductance is redefined for voltage equation of PM machines, and the methods of calculation by using finite element analysis method and measurement are explained.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권1호
• /
• pp.40-47
• /
• 2014

Sinusoidal back-EMF waveform of vernier Permanent Magnet (PM) machines is analyzed in this paper. An analytical expression of Electromotive Force (EMF) of electric machines including vernier machines is developed to analyze EMF harmonics, and the effect of vernier PM machine pole ratio, the ratio of number of rotor poles to stator poles, on the EMF waveform. Moreover, this paper represents several Finite Element Analysis (FEA) models to verify the analysis based on the proposed expression, and the effect of tooth width ratio, which is the ratio of tooth width to tooth pitch, on back-EMF of vernier PM machines, and optimal tooth width ratio is obtained and verified by FEA. Finally, this paper makes comparisons between EMF waveform of vernier PM machines and that of traditional PM machines from the point of view of analytical EMF expression.

• 한국공작기계학회논문집
• /
• 제16권2호
• /
• pp.100-105
• /
• 2007

Electro-rheological(ER) fluid and valve are fabricated and evaluated experimentally in its durability to utilize the hydraulic control systems for long term operation. The two-ports ER valve used in the experiment consist of twelve parallel multi-layer electrodes and provide a restriction to the passage of ER fluid because of the viscous pressure drop and a component induced by the electric field. The durability test of ER valve are performed by measuring the surface roughness of electrodes with variation of an electric field strength and test time(1000 or 1800min.). Also, the shear stress and shear rate are measured to evaluate the durability of ER fluid as function of time. After durability test, ER shear stress increases approximately proportional to the shear rate with applied electric field intensity, In the ER valve, the center line average height roughness(Ra) of copper electrode increases about 1.56 times and ten-point median height roughness(Rz) increases about 2.2 times after the durability test. An understanding of these durability is essential to predicting the service life of ER fluid and valves.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1371-1376
• /
• 1990

The paper presents a method of constructing simple fuzzy control rules for the determination of stabilizing signals of automatic voltage regulator and governor, which are controllers of electric power systems. Fuzzy control rules are simplified by considering a coordinate transformation with the rotation angle .theta. on the phase plane, and by expanding the range of membership functions. Also, two rotation angles .theta. $_{1}$ and .theta. $_{2}$ are selected for the linearizable region and the nonlinear one of the system, respectively. Here, .theta. $_{1}$ is chosen by the pole assignment method, and .theta. $_{2}$ by a performance index. Fuzzy inference is applied to the connection of two rotation angles .theta. $_{1}$ and .theta. $_{1}$ by regarding the distance from the desired equilibrium point as a variable of condition parts. The control effect is demonstrated by an application of the proposed method to one-machine infinite-bus power system.

• 대한전기학회논문지
• /
• 제32권9호
• /
• pp.315-324
• /
• 1983

과파안정도의 문제중의 하나가 발전기에 장거리 송전선으로 무한의 bus가 연결되었을 때이다. Wisconsin 전력의 Point Beach발전소에 원자력turbine-발전기 #1 그리고 #2가 한 Unit 또는 두 Unit가 밀워키(Milwaukee)의 하나 또는 두 line과 분리되었을대 과파적 불안정 상태가 발생하였다. 이러한 조건하에서 전력계통안정장치(Power System Stabilizer)가 안정작동을 위하여 excitation 계통에 상용되었다. 전력계통안정장치(PSS)의 산정치를 등가 machine0infinits bus성능의 root-locus 분석과 computer 방법에 의한 분석으로 먼저 계측되었다. 이 방법은 전력계통안정장치의 디자인에 그래프식 접근을 허용하고, 디자인 제약들이 변화되어서 speed stabilizer가 계통댐핑(damping) 향상이 요구될때 종합적인 방법으로 생각되어 exciter-generator 계통의 간단한 모델을 세워 분석하였다.

• 한국수소및신에너지학회논문집
• /
• 제20권1호
• /
• pp.31-37
• /
• 2009

An ejector is a machine utilized for mixing fluid, maintaining a vacuum, and transporting fluid. The Ejector enhances system efficiency, are easily operated, have a mechnically simple structure, and do not require a power supply. Because of these advantages, the ejector has been applied to a variety of industrial fields such as refrigerators, power plants and oil plants. In this work, an ejector was used to safely recycle anode tail gas in a 5 kW Molten Carbonate Fuel Cell system at KEPRI(Korea Electric Power Research Institute). In this system, the ejector is placed at mixing point between the anode tail gas and the cathode tail gas or the fresh air. Commercial ejectors are not designed for the actual operating conditions for our fuel cell system. A new ejector was therefore designed for use beyond conventional operating limits. In this study, the entrainment ratio is measured according to the diametrical ratio of nozzle to throat in the designed ejector. This helps to define important criteria of ejectors for MCFC recycling.