• 한국산학기술학회논문지
• /
• 제10권11호
• /
• pp.3115-3120
• /
• 2009

전기선로전환기는 열차가 진행하고자 하는 진로로 운행할 수 있도록 분기기를 전환시키는 설비로서 도시철도 및 간선철도를 비롯한 대부분의 철도에서 많이 설치되어 사용되고 있다. 이러한 전기선로전환기의 유지보수 작업대부분은 유지보수자들이 포터블 계측기를 이용하여 수작업으로 현장에서 모터 전원, 제어 전원, 표시 전원에 대한 측정을 하는 것이다. 특히 NS형 또는 NS-AM형 전기선로전환기의 경우에는 유지보수 주기가 너무 잦기 때문에 이러한 측정에 많은 인력이 요구되고 있을 뿐만 아니라 작업 도중 부주의에 의한 사상사고도 발생하고 있다. 본 논문에서는 이러한 유지보수 작업의 향상을 위해 현장에 설치된 전기선로전환기의 상태를 모니터링하는 시스템을 제안하고 있으며, 이러한 모니터링 시스템은 전기선로전환기에 대한 각종 측정값을 실시간으로 확인하여 유지보수 업무의 향상을 이룰 수 있을 것으로 기대된다.

• 전기학회논문지
• /
• 제66권12호
• /
• pp.1821-1829
• /
• 2017

A point machine requires lots of time and attention in terms of maintenance, since it causes 40% of failures among the railway signaling devices. The senescence of the point machine critically matters to the overall turnout system. In this paper, we analyzed the aging characteristics of the point machine by using the switching current of the point machine. The analysis is done based on the switching current measurements of the point machines deployed in the Sehwa outdoor test site and the Korail Kyongbu line. It is expected that the analysis result can be utilized for real-time diagnosis in the aspect of the maintenance of the point machines and predicting abnormal operations.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 추계학술대회 논문집
• /
• pp.48-53
• /
• 1998

In this paper, the new electrochemical machining method is proposed for the micro unit fabrication by using the point electrode tools. The precision shape control capacity is improved by using the point electrode method. It was observed that an electric discharge phenomenon occurs during the electrochemical machining process by using the spraying and torrent type electrolyte supply method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.750-752
• /
• 2003

This paper presents a method of tolerance analysis for a electric machine. Tolerance analysis technique is required to find the tolerance band of design variables and estimate the characteristic distribution of the electric machine, because that manufacturing tolerances as well as measuring errors have a great influence on the electric machine. Therefore, this paper introduces Stochastic Response Surface Methodology to achieve the tolerance analysis. As an example, the tolerance analysis is applied to the analysis of torque characteristics for a BLDC motor from the electric point of view.

• 한국공작기계학회논문집
• /
• 제11권5호
• /
• pp.93-99
• /
• 2002

In general, manufacturing error is originated from bad material, machine tool defection and tool breakage. When the manufacturing process is stable, the most of error come from the tool wear. In common on-machine measurement teaching probe and touch sensor are widely used however in this paper the electric touch point type automatic tool compensation system is developed the performance of it is validated and effective operating is proposed.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.100-105
• /
• 2002

In general, manufacturing error originated in bad material, machine tool defection, tool defection, and tool breakage. When the manufacturing process is stable, the error is come from the tool wear. In common on-machine measurement, teaching probe and touch sensor are widely used, however in this thesis the automatic tool compensation system using electric touch point measuring system is developed and evaluated, and effective operating is proposed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.906-909
• /
• 2000

To improve dimension accuracy and make very small parts are one of the major purpose on the electrochemical micromachining. This paper introduce a small machine tool by using the point electrode. That has a data acquisition system for gathering applied electric condition between the gap. Point electrode on this system was made by this method as well. It was found that variable phenomena occurred through the acquired V-I curve on the process.

• 대한치과보철학회지
• /
• 제37권6호
• /
• pp.791-799
• /
• 1999

The purpose of this study was to investigate the displacements of cast framework by torch soldering and electric soldering techniques. Specimen had two cylinders and connecting bar that had sectioned with 0.3mm gap at mid point. 10 of total specimens were divided into two groups. In torch soldered group, soldering investment block was made and conventional torch solder-ing procedure was carried out. In electric soldered group, electric soldering was carried out on the master cast without soldering investment block by using electric soldering machine(Dentapunkt DP 7, Kulzer, Germany) After soldering procedure, three dimensional coordinates of two centroids of each cylinder were measured by three dimensional coordinate measuring machine. The intercentroidal displacement and global displacement were calculated and then, these values were compared and evaluated. The results were obtained as follows: 1. Intercentroidal distances of specimens decreased after both soldering procedures, and the decrease in intercentroidal distance was greater for torch soldered group than for electric soldered group 2. Global displacements of torch soldered group were greater than those of electric soldered group.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2019년도 춘계학술대회
• /
• pp.400-402
• /
• 2019

철도 레일의 선로 변경을 위해 사용되는 분기기의 제어를 담당하는 전기선로전환기는 철도시스템 중에서 매우 중요하게 관리되고 있다. 선로전환기의 상태를 확인하기 위해 다양한 유무선 실시간 모니터링 시스템이 사용되고 있으나 센서 또는 네트워크 오류 등으로 인한 오작동 가능성이 존재하고 있다. 본 논문에서는 선로전환기 작동상태를 이중으로 확인하기 위하여 선로전환감시시스템과 CCTV카메라 관제 시스템이 통합된 이중화 감시시스템을 설계하였다. 선로전환감시시스템에서는 전로전환기의 작동상태를 감시, 경보 그리고 네트워크를 통해 전송한다. 그리고 이 정보를 전달받은 CCTV카메라 관제시스템에서는 해당 선로전환기와 분기기의 상태를 촬영하여 관리자에게 전송하도록 하였다. 선로 관리자는 선로전환기용 모니터링 화면을 통해 선로 전환상태를 1차적으로 확인하고 이어서 CCTV카메라 영상을 통해 전환상태를 직접 확인함으로써 선로전환기의 작동에 대한 신뢰성을 향상 시킬 수 있다. 또한 관리를 위한 인력 운용을 안전하고 효율적으로 수행할 수 있게 된다. 이를 통해 선로전환기의 오작동으로 인해 선로 분기기에서 발생되는 선로 이탈사고 예방에 기여될 것으로 기대된다.

• 한국분말재료학회지
• /
• 제12권5호
• /
• pp.351-356
• /
• 2005

Nanoscale Al powder with thin layer of alumina was produced by Wire Electric Explosion (WEE) process. Spark-Plasma Sintering (SPS) was performed for the produced powder to confirm the effectiveness of SPS like so-called 'surface-cleaning effect' and so on. Crystallite size and alumina content of produced powder varied with the ratio of input energy to sublimation energy of Al wire ($e/e_s$): Increase in ($e/e_s$) resulted in the decrease of crystallite size and the increase of alumina content. Shrinkage curve during SPS process showed that the oxide surface layer could not be destroyed near the melting point of Al. It implied that there was not enough or no spark-plasma effect during SPS for Al/Alumina powder.