• 한국산학기술학회논문지
• /
• 제14권10호
• /
• pp.4719-4725
• /
• 2013

본 논문에서는 ASM을 이용하여 전기 이륜차 장치에 대한 모델기반 설계 기법을 제시하였다. 실제, 전기 이륜차의 시제품 제작 이전에 전기 이륜차의 최적화와 동력을 예측하기 위해서는 신뢰성을 갖는 해석이 필요하다. 과거의 전기 이륜차 연구는 미시적 관점보다는 거시적 관점에서 실시되었다. 그러나, 본 연구에서는 전기 이륜차 핵심 부품에 대한 상세 해석을 실시하였다. 본 논문에서는 이론과 실험해석의 에러 비율이 2.3%에 달하는 양호한 결과를 얻을 수 있었다. 이 같은 상세 해석을 통하여, 전기 이륜차의 해석 정확도를 향상시키고 설계인자 해석이 가능하게 되었다. 또한, 본 연구에서는 전기 이륜차가 직면하고 있는 Fail safety에 대한 효과적 방법을 제시하였다.

• 한국자동차공학회논문집
• /
• 제21권3호
• /
• pp.58-65
• /
• 2013

In this paper, we propose that a model based design for an electric motor cycle system using ASM (Automotive Simulation Models). Before prototyping a realistic electric motorcycle, a reliable simulation program is required to test the capacities of the power sources and optimize the parameters of an electric motorcycle. Because ASM is based on Simulink, we can design the drivetrain and powertrain of the vehicle model systems easily. To verify the electric motorcycle system analysis of design parameters such as max power, capacity, state of charge and slope angle is carried out by the simulation and experimental method. The predicted results by the development model were in good agreement with the experimentally obtained results. Therefore, the proposed electric motorcycle model can effectively reduce the expenses during the designing of an electric motorcycle system.

• 한국산학기술학회논문지
• /
• 제12권11호
• /
• pp.5156-5163
• /
• 2011

전기 구동 이륜차는 우수한 연비 및 환경공해 능력 때문에 가장 유망한 미래 교통수단 중의 하나이다. 실제 전기 이륜차 시제품을 제작하기 전에 신뢰성이 확보된 시뮬레이션 프로그램을 통하여 전기 이륜차의 설계인자 최적화와 동력원의 능력을 평가할 필요가 있다. 이 같은 과정을 통하여 전기 이륜차 시스템 설계 과정에서의 소요비용을 줄일 수 있다. 본 논문에서는 수월하게 Simulink와 PSAT을 이용하여 구동 및 동력 시스템을 모델링할 수 있는 Matlab 기반의 전기 이륜차 해석 프로그램을 제시하였다. 전기 이륜차의 최대 출력, 에너지 능력, 충전 상태, 등판각도와 같은 설계 인자 해석을 실험과 시뮬레이션을 병행하였다. 본 연구에서 개발된 모델에 의해서 예측된 해석결과는 실험에 의해서 얻어진 결과와 양호하게 일치하였다.

• 한국기계가공학회지
• /
• 제19권12호
• /
• pp.113-118
• /
• 2020

Recently, eco-friendly electric motorcycles have been considered to replace aging gasoline motorcycles to reduce the amount of suspended fine dust in air. However, existing rechargeable battery-powered electric motorcycles have been found unacceptable by users because of their many limitations, such as long charging time, short travel distance per charge, and low driving speed. To overcome the drawbacks of conventional electric motorcycles, this paper proposes an exchangeable battery-powered electric motorcycle and a new frame shape for housing the exchangeable battery. The proposed frame is similar to that of current electric motorcycles; however, the shape and position of the saddle support, battery, and controller mount section are redesigned. The safety of the presented frame is verified through static and dynamic analyses using ABAQUS. In particular, the dynamic analysis is conducted under the most extreme condition among the various operating situations, thus confirming the robustness of the proposed frame design.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.107-108
• /
• 2011

This paper developed 110cc class electric motorcycle using IPMSM. First, Tractive effort calculated by considering the driving environment of motorcycle. And accordingly the motor and inverter were designed and manufactured. It was mounted on motorcycles and test result was compared with the output power of motorcycle with an internal combustion engine.

• 한국지능시스템학회논문지
• /
• 제22권3호
• /
• pp.361-366
• /
• 2012

본 논문은 퍼지 제어기를 이용하여 전기 이륜차의 속도를 제어한다. 전기 이륜차는 스로틀에 대하여 빠른 응답성과, 정속주행 시 안정성이 요구 된다. 그러나 현재 양산중인 전기 이륜차는 1.5KW(50cc)급으로 탑승자 및 수화물 중량, 도로 상태(비포장 길, 아스팔트 길) 및 바람의 저항 등 부하 변동에 따라 속도 변화가 매우 크므로 정속 주행이 어려우며, 오르막길과 내리막길의 경사도에 따라 급격한 속도 변화가 발생된다. 이러한 문제점을 해결하기 위하여 속도의 오차와 오차의 변화량을 퍼지 제어기의 입력 값으로 사용하고, 모터의 Q축 제어 량을 퍼지 제어기의 출력 값으로 설정 하여 퍼지 제어기를 구성하였다. 모터의 D축 제어 량은 Q축 제어 량에 비례적으로 설정하여 매입형 영구 자석 동기 전동기(Interior Permanent Magnet synchronous Motor, IPMSM)를 장착한 전기 이륜차를 구동하였다. 본 논문에 적용된 제어 대상은 1.5KW급 전기이륜차로서 모터의 속도 제어를 위하여 제안된 알고리즘을 이용한 퍼지 제어기를 사용 하였으며, 매입형 영구 자석 동기전동기의 토크 제어를 위하여 D, Q축 전류 제어기를 사용 하였다. 제안된 알고리즘을 이용한 퍼지 제어기는 설정된 속도를 잘 추종하였다.

• International journal of advanced smart convergence
• /
• 제11권1호
• /
• pp.87-93
• /
• 2022

In each country, efforts are being made to replace engine-driven cars and motorcycles using fossil fuels with electric drive. Electrically driven vehicles have the advantage of no harmful gas or environmental pollution and low noise. In the motorcycle market, China accounts for more than 95% of the world, and the electric motorcycle market is being revitalized due to the strengthening of regulations. Japan is actively preparing to include electric motorcycles in ISO 26262, forming a TF team centered on electric motorcycle producers. Therefore, it is necessary to respond to standardization targeting China and Japan in Korea. In this study, we propose a proprietary transmission model that can be applied to small electric vehicles that can be operated in hilly domestic terrain. The proposed continuously variable transmission model is a continuously variable transmission system which moves the pin between the basic disk and the rotary disk using a spline to perform shifting. The proposed continuously variable transmission model is used in the pulley configuration by connecting the linear type spline and the inclined spline with the central axis of the basic disk and the rotational disk, respectively. In addition, it can be divided into two types according to the application of the auxiliary disk, and the production drawing is completed for the practical use of the model.

• 패션비즈니스
• /
• 제22권5호
• /
• pp.125-136
• /
• 2018

This study intended to develop a motorcycle safe vest that can be prepared against accidents by mounting a smart module (with built-in sensor) on the safe vest in order to emphasize safety among functional aspects of the motorcycle clothing. The research method investigated professional books, prior research, and Internet data to examine the characteristics of motorcycle wear and the theoretical examination of smart wear, and analyzed the functional characteristics of the design by reviewing smart jacket and vest design cases for motorcycles currently on the market. As a results of study an interface device sensor, which contains a sensor with IMU(Intertial Measurement Unit) and CPU(Central Processing Unit), was inserted into a motorcycle top in order to draw attention to the safety of motorcycle riders. The IMU sensor attached to the vest detected the tilting motion of the rider to either left or right side to obtain data on left or right direction, sudden stop, and so forth and displayed left or right turn signal and sudden stop sign on the backplate (back) through the LED module. As for charging the device to operate LEDs, a generator, which is designed to convert the heat energy in the exhaust into electric energy, was used to efficiently self-produce the power required to operate LEDs of the top while riding.

• 한국자동차공학회논문집
• /
• 제19권5호
• /
• pp.7-13
• /
• 2011

The climate change due to the increased consumption with fossil fuel and rise of the oil price have been serious global issues. Automobile industry consumes 30% of the oil every year and causes air pollution and global warming by the exhaust emissions and carbon dioxide ($CO_2$). The demand of two-wheeled vehicle increases every year due to the parking and traffic problem caused by the increased automobiles in the urban area. Approximately 50,000,000 two-wheeled vehicles were produced in 2008. The development and sales of the hybrid two-wheeled vehicle industry become active due to its increased market demands. In this paper, the change of the motor and battery efficiency, driving distance, hill climbing ability with the change of the motor capacity was analyzed. Simulation of the peculiarities in urban driving schedule(World-wide Motorcycle Test Cycle(WMTC), Manhattan driving schedule), constant speed(10 km/h, 35 km/h) of small electronic two-wheeled vehicle was also carried out. Through the simulation result, appropriate capacities of the motor and battery for urban driving was acquired.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.854-855
• /
• 2011

In this paper, Interior permanent magnet synchronous motor(IPMSM) with concentrated winding for 110cc electric motorcycle is introduced. Optimum design is performed so as to satisfy wide speed operation range. And output characteristics is analyzed according to shoe height in many variables. Because partial magnetic saturation in shoe affects the harmonics, output characteristics of motor could be confirmed that a significant change. As a result, the new shape and the optimal design parameters considering the partial magnetic saturation is obtained. Compared with the base model, wide operating range was confirmed.