• KIEAE Journal
• /
• 제8권1호
• /
• pp.45-52
• /
• 2008

Daylighting systems can improve the luminous quality of indoor environment and reduce the building's electric lighting energy consumption. For designing good daylighting, place the light where it is desired and avoid excessive contrasts, glare and high light levels. Sun scoop, light scoop and sun catcher systems have been used for alternative systems compared to other natural lighting systems. This study aims to evaluate daylighting performance of sun scoop, light scoop and sun catcher systems using scale model experiments. For the purpose, the 1/10 scale models of the systems were made as the same areas of glazing(10 percent of floor area) on the top of the center roof. Totally 15 measuring points of illuminance on the horizontal work plane were monitored from 09:30 to 12:30 on October 29, 2007. Agilent data logger and photometric sensors Li-cor were used. As the results, the topside lighting systems can improve the illumination uniformity than side lighting and top lighting. However, the appropriated shading system should be integrated to prevent the direct sunlight.

• 한국태양에너지학회 논문집
• /
• 제37권3호
• /
• pp.1-12
• /
• 2017

This paper deals with the effectiveness of a fiber optic solar lighting system that uses a Fresnel lens mounted on a two-axis solar tracker. A series of comparative analyses were made concerning its performance as compared to fluorescent lighting by using a simulation model based on ECOTECT and RADIANCE as well as referring to actual data. ECOTECT was used to model the test room (space) while RADIANCE was used for its indoor lighting conditions (environment). It was found that the average indoor light levels of fluorescent lighting fully satisfy the KS standard (KS A 3011, general office, class [G]: 300-400-600 lux) whereas those of the solar lighting with light diffusers depends on the occlusion factor of roller shades installed on the south window.

• 한국전기전자재료학회논문지
• /
• 제25권11호
• /
• pp.938-941
• /
• 2012

LED is divided to multichannel in order not to exceed a certain voltage in aspects of electric standard. However, it's not possible to know in accordance with what channel SMPS controls the constant voltage and current. In order to solve this problem, it needs to detect the maximum LED String voltage which is applied to LED control circuit, and it is possible to minimize the voltage drop when a difference of LED string voltage occurs by each channel if LED is controlled by the maximum LED string voltage detected. In addition, it is also possible to maximize the efficiency of LED if change LED voltage by detecting the maximum voltage. Feasibility of this claim was verified through implementation of the circuit.

• 전기저널
• /
• 4호통권88호
• /
• pp.56-61
• /
• 1984

• 전기저널
• /
• 통권434호
• /
• pp.74-78
• /
• 2013

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.3-6
• /
• 2003

• 전기저널
• /
• 7호통권139호
• /
• pp.2-9
• /
• 1988

• 건축사
• /
• 통권484호
• /
• pp.62-64
• /
• 2009

• 조명전기설비학회논문지
• /
• 제27권1호
• /
• pp.10-16
• /
• 2013

This study performed a subjective evaluation of the Semantic Differential (SD) method for living room activities to evaluate the living room lighting environment and investigated the relationship between these through luminance distribution in the space. As a result, three factors-"lightness", "emotion" and "calmness"-have been grouped together. According to the analysis of experimental variables, difference has been observed depending on color temperature, the dimming of the ceiling & cove lights and the use of down lights and a bracket. 'Conversation with Family', 'Having Fun with Family', 'Entertaining Guests' and 'Reading a Book or Newspaper' requires "lightness". In terms of "emotion"-centered activities, 'Watching TV' is the highest, but all three factors are related. In terms of "calmness"-centered activities, 'Relaxing' is the highest.

• 한국전기전자재료학회논문지
• /
• 제26권12호
• /
• pp.924-927
• /
• 2013

In this study, we proposed CMP-PLAs to replace the Al heat sinks as heat sink materials, and investigated heat dissipation characteristics of the LED lighting devices using them. The crystallinity of the proposed CMP-PLA heat sinks decreased with increasing carbon nanotube contents in CMP-PLA. However, the thermal conductivity was improved with the increase of the carbon nanotube contents. The heat dissipation characteristics of the LED lighting devices using CMP-PLA heat sinks was improved with increasing carbon nanotube contents in CMP-PLA. For the LED lighting devices using CMP-PLA heat sinks with 40% carbon nanotube contents, the initial temperature measured at the heat sink plate was $27^{\circ}C$, which increased as time, and it was saturated around $56^{\circ}C$ after an hour. The LED lighting devices using CMP-PLA heat sinks are expected to be functional materials that can reduce their weight and improve their electric properties, compared to those using existing Al heat sinks.