• 플랜트 저널
• /
• 제6권1호
• /
• pp.71-75
• /
• 2010

In this study, the validity study has been carried out to apply the combustion burner in an electric arc furnace. The validity of applying the combustion burner has been studied in the aspect of the operation through the calculation of heat balance. The average decrease rate of power on time is 11.2%. When the maintainability is compared to the door lance manipulator type, the multi-functional combustion burner is simple to replace and repair. The location of burner can be adopted according to the drawings which are recommended in this study. As a result, the validity of applying the combustion burner to improve an efficiency of electric arc furnace has been confirmed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.545-546
• /
• 2015

Arc flash hazard study is required for the electric power system of industrial plant nowadays. Arc flash incident energy and level are calculated by arc flash hazard study. The arcing fault clearing time is determined by the response time of protection devices. This paper is protection devices coordination study to reduce potential incident energy for industrial electric power system.

• 한국공작기계학회논문집
• /
• 제13권4호
• /
• pp.113-120
• /
• 2004

The object of this study is to investigate the effect of compounded welding through the AE(Acoustic Emission) characteristics for weld HAZ(Heat Affected Zone) under the static tensile test. This study was carried out an SWS 490A, high tension steel for electric shield metal arc welding(SMAW), $CO_2$ gas arc welding and TIG welding. Data displays are based on the measured parameters of the AE signals, along with environmental variables such as time and load. The accumulated AE event curve of HAZ definitely have the point of inflection subject to tensile test. The results of the tensile test of HAZ come out electric shield arc welding ＞$CO_2$ gas arc welding＞TIG welding in case of single welding, but generally the tensile test of HAZ come out electric shield arc welding＞ TIG welding ＞ $CO_2$ gas arc welding. These history plots give us useful and powerful information to analyze the results of material evaluation testing.

• 인터넷정보학회논문지
• /
• 제14권4호
• /
• pp.85-90
• /
• 2013

현재 전기화재 예측시스템은 제어용 마이크로프로세서로서 PIC(Peripheral Interface Controller)를 사용하고 있다. PIC는 DSP(Digital Signal Processor)보다 연산속도가 느려 실시간 연산능력이 부족하다. 그래서 아크 발생 시 나타나는 기본 특성파형을 기준 reference로 하여 이 reference와의 비교를 통해 아크로 인한 전기화재를 예측하여 경보한다. 기존의 전기화재 예측시스템은 이러한 경보를 원격의 중앙 서버에서 감시하고 후속 조치를 취할 수 있으나, 그 예측 에러율이 높을 뿐만 아니라, mobile 환경에서 원격제어를 하지 못하는 실정이다. 본 논문에서 시간영역, 주파수영역의 아크검출과 적응알고리즘을 변환영역에서 수행하는 웨이블릿 기반의 적응알고리즘"을 적용하여 새로운 실시간 아크검출 알고리즘이 탑재된 전기화재 예측시스템을 DSP를 이용하여 개발하였다. 또한 아크의 전기적 신호 및 전력품질 대한 원격 모니터링이 실시간으로 가능할 뿐만 아니라, iphone 환경기반의 App 개발을 통해 원격에서 제어가 가능하도록 구축하고 그 유용성을 확인하였다.

• 자원리싸이클링
• /
• 제18권4호
• /
• pp.52-61
• /
• 2009

본 연구의 목적은 기존 전처리 방법과 본 연구에서 도출한 표면처리 방법으로 전처리한 전기로슬래그의 물성을 분석하고 전처리 방법을 달리한 각각의 전기로슬래그의 대체율을 변화시켜 제작한 콘크리트의 특성을 비교 고찰하여 산업부산물인 전기로슬래그를 콘크리트용 굵은골재의 대체재로 활용하는데 있다. 한편, 표면처리 방법은 무기계의 실리카 용액을 사용하여 1일 함침 후 6시간 자연 건조하는 방법을 이용하였는데, 결과로부터, 기존의 온수처리방법에 비해 본 연구에서 사용한 표면처리방법이 더욱 효과적이었으며, 표면처리방법이 전기로슬래그의 팽창성 감소와 콘크리트용 굵은 골재로 활용하는데 효과적이라고 판단된다.

• 한국건설순환자원학회논문집
• /
• 제2권1호
• /
• pp.128-135
• /
• 2006

제강슬래그 중 콘크리트용 골재로 활용 가능성이 있는 전기로슬래그 골재에 대하여 촉진에이징 종류별 전기로슬래그 골재의 팽창성 감소 정도를 파악하고, 콘크리트용 최적 에이징 처리 방법 및 처리 기간을 제시하고자 하였다. 또한, 에이징 처리 후에도 전기로슬래그 골재 내부에 잔류되어 있는 팽창성이 콘크리트에 미치는 영향 및 콘크리트의 품질을 비교, 고찰하였다. 전기로슬래그 골재의 수침팽창 측면에서 온수중 에이징 방법이 증기중 에이징 방법보다 다소 우수한 결과를 나타내었다. 전기로슬래그 골재의 잔류팽창과 콘크리트의 압축강도를 비교한 결과 콘크리트용으로 전기로슬래그 골재를 사용하기 위해서는 에이징 처리에 의해 잔류팽창을 0.06% 이하로 충분히 낮춘 후 사용해야 한다. 또한 현재 도로용으로 한정되어 사용되고 있는 전기로슬래그를 콘크리트용 골재로 사용하기 위해서는 골재의 품질개선 뿐만 아니라 감수제 및 AE제 등 적절한 혼화재료의 사용이 필요하겠다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.2102-2103
• /
• 2008

The major causes of electrical fire are classified to short circuit fault, overload fault, electric leakage and electric contact failure. The occurrence factor of the fire is electric arc or spark accompanied with electrical faults. Residual Current Protective Device(RCD) of high sensitivity type used at low voltage wiring cuts off earth leakage and overload, but the RCD can't cut off electric arc or spark to be a major factor of electrical fire. As the RCDs which are applied low voltage distribution panel are prescribed to rated breaking time about 30[ms](KS C 4613), the RCDs can't perceive to the periodic electric arc or spark of more short wavelength level. To be improved on such problem, this paper is proposed to a electrical fire disaster prevention device(EFDPD) for a RCD trip or a self circuit-breaking function on electric arc or spark due to electrical fire. Some experimental results of the proposed apparatus is confirmed to the validity of the analytical results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.919-921
• /
• 2000

This paper considers the research of the hybrid interrupter which adopts both rotating arc and thermal expansion technology. The operating principle of this device depends on rapid arc rotation due to the magnetic field created by the fault current through a coil which is mounted on contacts and also relies on the principle of thermal expansion created by arc energy in extinguishing chamber and finally causes pressure rise in expansion volume. In this research, the principle of the interrupting techniques are given and experimental results of hybrid interrupter which is developed by new technology is introduced.

• 열처리공학회지
• /
• 제36권1호
• /
• pp.22-32
• /
• 2023

In general, when scrap is dissolved in an electric arc furnace, the amount of electric furnace steel dust (EAFD) generated is about 1.5% of the scrap charge amount, and the electric furnace steel dust collected by the bag filter is charged into the Rotary Kiln or Rotary Hearth Furnace (RHF), and the zinc component is recovered as crude zinc oxide, at which time a clinker of Fe-Base is generated. In this research, first, for the efficient resource conversion of electric furnace steel dust, a reduction and roasting experiment was conducted and the reaction kinetics was examined. As a result of the experiment, it was observed that the reduction and roasting reaction was actively conducted in the range of 1100~1150℃, and melting occurred in the range of 1250℃. In the past, this clinker was widely used as a roadbed material for road construction and an Fe-Source for cement production, but in recent years, it has been mainly reclaimed due to strengthening environmental standards. However, landfill treatment is by no means a desirable treatment method due to environmental pollution caused by leachate, expensive landfill costs, and waste of Fe resources. Therefore, in order to more actively recycle the Fe component in the clinker, first of all the clinker was pulverized into an optimal particle size, and anthracite and binder (starch) were added to the magnetic material obtained by specific gravity and magnetic separation for briquet. As a experimental results, it was possible to efficiently separate clinker as Fe component and other slag component by specific gravity and magnetic force. As a results of loading and dissolving the manufactured briquet clinker in an electric arc furnace, it was observed that the unit of power and production yield were clearly improved and the carbon addition effect in molten metal was also somewhat.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.952-957
• /
• 1992

When the circuit-breaker switches off, an electric arc is established between the contacts. It is very important to understand the arc characteristics for the design of a circuit breaker. This article describes the theoretical analysis of the arc characteristics by means of energy integral method when convection dominated low current arcs are produced in the dual-airflow nozzle of a model interrupter. In order to investigate the arc radius, the average electric field strength and the arc voltage, the arc column is divided into two regions, and then the energy conservation equation is applied to the arc in each region together with the axial cold flow mass flux function, steady-state mass balance equation and Ohm's law. The results show good agreements with those of other researchers.