• 한국컴퓨터정보학회논문지
• /
• 제27권8호
• /
• pp.211-218
• /
• 2022

광반사 변조 분광법에서 측정된 결과를 해석하기 위하여 전산모사 프로그램을 개발하였다. 개발된 프로그램은 광반사 변조 분광 특성해석에 필요한 인자들을 사용자가 손쉽게 바꿀 수 있으며, 그 값에 따른 결과를 실제 측정 결과와 동시에 확인할 수 있도록 구현하였다. 광반사 변조 분광법에서 얻어지는 결과는 밴드갭 주변에서 변조되어 나타나는 TDFF(Third Derivative Function Form)와 밴드갭보다 높은 에너지에서 나타나는 표면 및 계면에서의 전기장에 기인한 FKO(Franz-Keldysh Oscillation)신호가 혼합하여 나타난다. 전산모사 프로그램을 통하여, 실제로 단일층으로 형성된 GaSb Epi 층에서 나타나는 광변조 특성에 대하여 해석하였으며, 광변조 분석에 특화되어 매우 유용한 결과를 얻을 수 있었다. 또한, FFT (Fast Fourier Transform) 해석 Tool을 추가하여 FKO의 주파수 특성분석을 보다 용이하게 하였다.

• Journal of Radiation Protection and Research
• /
• 제48권2호
• /
• pp.90-99
• /
• 2023

Background: Quantitative risk assessments should be accompanied by uncertainty analyses of the risk models employed in the calculations. In this study, we aim to develop a computational code named SUMRAY for use in cancer risk projections from radiation exposure taking into account uncertainties. We also aim to make SUMRAY publicly available as a resource for further improvement of risk projection. Materials and Methods: SUMRAY has two versions of code written in R and Python. The risk models used in SUMRAY for all-solid-cancer mortality and incidence were those published in the Life Span Study of a cohort of the atomic bomb survivors in Hiroshima and Nagasaki. The confidence intervals associated with the evaluated risks were derived by propagating the statistical uncertainties in the risk model parameter estimates by the Monte Carlo method. Results and Discussion: SUMRAY was used to calculate the lifetime or time-integrated attributable risks of cancer under an exposure scenario (baseline rates, dose[s], age[s] at exposure, age at the end of follow-up, sex) specified by the user. The results were compared with those calculated using another well-known web-based tool, Radiation Risk Assessment Tool (RadRAT; National Institutes of Health), and showed a reasonable agreement within the estimated confidential interval. Compared with RadRAT, SUMRAY can be used for a wide range of applications, as it allows the risk projection with arbitrarily specified risk models and/or population reference data. Conclusion: The reliabilities of SUMRAY with the present risk-model parameters and their variance-covariance matrices were verified by comparing them with those of the other codes. The SUMRAY code is distributed to the public as an open-source code under the Massachusetts Institute of Technology license.

• 한국재난정보학회 논문집
• /
• 제19권4호
• /
• pp.844-850
• /
• 2023

연구목적: 본 논문은 백열전구를 이용하여 단락보호 전원공급 장치를 개발하고, 이를 학습 교구로 활용하는 연구에 관한 것이다. 전기 안전과 에너지 절약을 동시에 고려한 이 연구는 교육과 산업 분야에서 중요한 응용 가능성을 가지고 있다. 백열전구를 활용한 단락보호 전원공급 장치는 기존의 전원공급 장치와 비교하여 안전성과 효율성을 향상시키는데 도움이 되며, 학습 교구로 학습자들에게 전기 안전 교육을 제공함으로써 실생활에서의 전기 안전 지식을 습득하는데 기여한다. 연구방법: 백열전구를 사용하여 단락보호 전원공급 장치를 개발하고 개발된 장치의 성능 평가 및 안전성 확인을 통해 학습 교구로 활용할 수 있는 새로운 전원공급장치를 제작 한다. 결론:백열전구를 활용한 단락보호 전원공급 장치의 개발과 학습 교구로의 응용 가능성을 탐구한 연구이다. 이를 통해 전기 안전과 에너지 절약에 기여할 수 있는 혁신적인 솔루션을 제시하였으며, 교육 분야와 산업 분야에서의 응용 가능성을 열어놓았다. 이러한 연구는 전기 안전 및 에너지 관리 분야에서의 연구와 교육에 기여할 것으로 기대된다.

• 대한산업공학회지
• /
• 제38권3호
• /
• pp.220-226
• /
• 2012

The Electric discharge machining (EDM) process is used to minimize the difference between designed feature and machined feature while the most workpiece is removed through the cutting processes. The tiny-deep hole machining and perpendicular wall machining in mold and die are good applications of EDM. Among EDM equipment, the super drill uses the hollowed electrode to eliminate the debris which causes the second discharge with the electrode and degrades the machining quality. Through the hollow, the high pressured discharge oil is supplied to remove the debris together with the spindle rotation. The thin-hollow electrode tends to easily wear out compared to the sold die-sinking electrode and its wear rate is might not allowed to monitor in real time during discharging. Up to now, the wear amount is measured by off line method, which leads machining time to increase because the hole pass-through moment can be check by visual (manually) with the extra tool path. Therefore, this study suggests the attractive method to evaluate the hole pass-through moment in which the gap voltage and z-axis encoder pulse are monitored to predict the moment. The commercial super drill is used to validate the proposed method and the experiment is carried out.

• Journal of Microbiology and Biotechnology
• /
• 제15권6호
• /
• pp.1221-1228
• /
• 2005

Carbon electrode was applied to a wastewater treatment system as biofilm media. The spatial distribution of heterotrophic bacteria in aerobic wastewater biofilm grown on carbon electrode was investigated by scanning electron microscopy, atomic force microscopy, and biomass measurement. Five volts of electric oxidation and reduction potential were charged to the carbon anode and cathode of the bioelectrochemical system, respectively, but were not charged to electrodes of a conventional system. To correlate the biofilm architecture of bacterial populations with their activity, the bacterial treatment efficiency of organic carbons was measured in the bioelectrochemical system and compared with that in the conventional system. In the SEM image, the biofilm on the anodic medium of the bioelectrochemical system looked intact and active; however, that on the carbon medium of the conventional system appeared to be shrinking or damaging. In the AFM image, the thickness of biofilm formed on the carbon medium was about two times of those on the anodic medium. The bacterial treatment efficiency of organic carbons in the bioelectrochemical system was about 1.5 times higher than that in the conventional system. Some denitrifying bacteria can metabolically oxidize $H_{2}$, coupled to reduction of $NO_{3}^{-}\;to\;N_{2}$. $H_{2}$ was produced from the cathode in the bioelectrochemical system by electrolysis of water but was not so in the conventional system. The denitrification efficiency was less than $22\%$ in the conventional system and more than $77\%$ in the bioelectrochemical system. From these results, we found that the electrochemical coupling reactions between aerobic and anaerobic reactors may be a useful tool for improvement of wastewater treatment and denitrification efficiency, without special manipulations such as bacterial growth condition control, C/N ratio (the ratio of carbon to nitrogen) control, MLSS returning, or biofilm refreshing.

• 시스템엔지니어링학술지
• /
• 제7권2호
• /
• pp.7-11
• /
• 2011

A high-speed railway system represents a typical example of large-scale multi-disciplinary system, consisting of subsystems such as rolling-stock, electrical hardware, electronics, control, information, communication, civil technology etc. The system design and acquisition data of the large-scale system must be the subject under strict configuration control and management. Systems engineering technology development project for Korea next generation High-speed Electric Multiple Unit (HEMU) system in progress is a national large system development project that is not only a large-size and complex but also multi-disciplinary in nature. Therefore, all stakeholders must understand and share the functional and performance requirements of HEMU throughout its life-cycle phases. Also in the test and evaluation phase, all systems requirements must be verified. In 2011, the prototype train manufacturing will be completed. It will do test run on the commercial line and all systems requirements are verified until 2012. For the system verification, the test and evaluation process have to be established before the test trial run. Using a systems engineering tool, the system design database(SDD) with requirements traceability and development process management in the course of the development have to be established. This paper represents the test and evaluation process development based on the SEMP(Systems Engineering Management Plan) developed in the design stage. The test and evaluation process is refined and updated in comparison to the design stage one. The test and evaluation process consists of procedure, test and evaluation method and schedule. So through this process, it is defined that each systems requirements is verified on which test and about what time.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.49-54
• /
• 2008

This study is to investigate an optimal size and position of PV system for apartment complex enough the electrical load matching analysis. The 4 types of arrangements of apartment buildings are considered as follows; ㅡtype, alternative ㅡtype, ㄱtype and ㅁtype. We assume that the studied site is composed of 9 buildings. Firstly, solar access evaluation of roof and facade in apartment buildings was performing with the hourly simulations of total received insolation on each surface considering the hading effect of buildings. Electrical load profile of typical Korean apartments was investigated for the lad matching analysis. To calculate an annual total PV output, we used MERIT program which is a sourly based load matching tool developed by ESRU. TRY weather data of Daejeon are applied for this analysis. Result shows that approximately 11% of total electric load of the site can be supplied by the PV system in the case of full installation of PV system at the whole south-face roof area of 9 buildings in this stuided apartment complex. Depending of a various installation option of roof and facade area, the possible ratio of PV supply in total electrical load varies from 9% to 42%. Among the 4 arrangement types, the ㅡ type revealed the best option for the maximum output of PV system.

• 지질공학
• /
• 제15권1호
• /
• pp.1-8
• /
• 2005

전기전도도 측정방법에 의한 수리전도도 측정 기법 개발의 일환으로, 모형 시추공을 이용한 실내 실험에 이은 원위치 현장 적용 시험을 실시하였다. 현장 적용은 사전 현장 적용실험을 거쳐 춘천시 봉명리 강원대학교 산림학습원 구역내에 있는 BM-2와 BM-3의 두 시추공에서 이루어졌다. 두 시추공을 양수정과 측정공으로 서로 번갈아 사용하며 염수 주입과 종료를 기준으로 다수의 시계열 전기전도도 자료를 획득하였다. 이들 시계열 전기전도도 분포곡선의 분석으로부터 공별, 심도별 수리 특성 정보를 얻을 수 있었으며, 원위치 현장 투수시험 방법으로서의 가능성이 확인되었다.

• 정보관리연구
• /
• 제37권2호
• /
• pp.93-107
• /
• 2006

지역별 특화산업 현황과 이의 육성을 위한 정책 의사결정을 지원하기 위해서는 지역 기술혁신활동을 보다 실제적으로 모니터링하는 것이 중요하다. 특허통계를 이용하여 지역별, 국가별 혁신능력을 비교하는 연구는 많이 있어왔다. 그러나 기존의 방법은 주로 출원인(기업)의 본사를 기준으로 행해져 왔으며, 실제 혁신활동이 행해지고 있는 지역을 기준으로 하지는 못하였다. 따라서 본 연구에서는 실제 혁신활동을 대표한다고 할 수 있는 발명자의 지역분포 현황과 발명자 간의 네트워크를 분석함으로써 특정 기술분야의 인력교류가 지역적으로 어떤 관계를 보이는 지를 알고자 하였다. 이를 위해서 한국공개특허 H01 분류(기본적 전기소자 기술) 중 내국인이 출원한 특허 전체를 대상으로 하여, 발명자 지역 데이터 추출 및 지역 간 네트워크 분석을 통해 기술혁신활동의 지역 간 연계구조를 분석하였다.

• 한국태양에너지학회 논문집
• /
• 제28권3호
• /
• pp.60-66
• /
• 2008

This study is to investigate an optimal size and position of PV system for apartment complex through the electrical load matching analysis. The 4 types of arrangements of apartment buildings are considered as follows; ㅡtype, alternative ㅡtype, ㄱtype and ㅁtype. We assume that the studied site is composed of 9 buildings. Firstly, solar access evaluation of roof and facade in apartment buildings was performed with the hourly simulations of total received insolation on each surface considering the shading effect of buildings. Electrical load profile of typical Korean apartments were investigated for the load matching analysis. To calculate an annual total PV output, we used MERIT program which is a hourly based load matching tool developed by ESRD. TRY weather data of Daejeon are applied for this analysis. Result shows that approximately 11% of total electric load of the site can be supplied by the PV system in the case of full installation of PV system at the whole south-face roof area of 9 buildings in this stuided apartment complex. Depending on a various installation option of roof and facade area, the possible ratio of PV supply in total electrical load varies from 9% to 42%. Among the 4 arrangement types, the ㅡtype revealed the best option for the maximum output of PV system.