• International Journal of Precision Engineering and Manufacturing
• /
• 제6권4호
• /
• pp.44-48
• /
• 2005

As mechanical components are miniaturized, the demands on micro die/mold are increasing. Micro mechanical components usually have high hardness and good conductivity. Micro electrical discharge machining (MEDM) can thus be an effective way to machine those components. In micro cavity fabrication using MEDM, it is observed that the bottom surface of the cavity is distorted. Electric charges tend to be concentrated at the sharp edge, and debris cannot be drawn off easily at the center of the bottom surface. These two phenomena make the bottom surface of electrode and workpiece distort. As machining depth increases, the distorted shape of the electrode approaches hemisphere. This process is affected by both capacitance and the size of electrode. By using a smaller electrode than the desired cavity size and appropriate tool movement, bottom shape distortion can be prevented.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권4호
• /
• pp.49-54
• /
• 2005

In this paper, micro structuring technique using localized electrochemical deposition (LECD) with ultra short pulses was investigated. Electric field in electrochemical cell was localized near the tool tip end region by applying pulses of a few hundreds of nano second duration, Pt-Ir tip was used as a counter electrode and copper was deposited on the copper substrate in mixed electrolyte of 0.5 M $CuSO_4$ and 0.5 M $H_2SO_4$, The effectiveness of this technique was verified by comparison with ECD using DC voltage. The deposition characteristics such as size, shape, surface, and structural density according to applied voltage and pulse duration were investigated. The proper condition was selected based on the results of the various experiments. Micro columns less than $10{\mu}m$ in diameter were fabricated using this technique. The real 3D micro structures such as micro spring and micro pattern were made by the presented method.

• 한국정밀공학회지
• /
• 제8권2호
• /
• pp.36-46
• /
• 1991

This study was carried out to investigate the characteristic of dynamic component in drilling. Materials used were carbon steel, brass and cast iron, and the drills used were high speed steel drill and cemented carbide. The cutting resistance generated in drilling was detected with the aid of piez0-electric tool dynamometer which has an excellent frequency response, and then the magnitude and shape of dynamic component and its frequency component as well were analyuzed. After a thorough study of interrelationship, the obtained results are as follows; 1) The shape of torque and thrust of the early drilling are different. 2) The shapes of dynamic component can be classified into four kinds. 3) Torque is related to frequency more closely than thrust. 4) As cutting speed increased, dynamic component increased. 5) Chipping took place continuously, and its size decreased as cutting proceeded.

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.941-946
• /
• 2018

Currently, due to the development of technology, the industry is proceeding with the development of advanced materials with high performance such as light weight, heat resistance and electric conductivity. Carbon Fiber Reinforced Plastics (CFRP) is an excellent material with high heat resistance, high strength and thermal shock resistance. In order to obtain excellent hole shape in CFRP drilling, we compared the modified drill shape and the conventional carbide drill. On the other hand, we determine the proper helix angle by observing the CFRP surface according to the helix angle at the trimming of the end mill proceeding after the hole machining.

• 산업경영시스템학회지
• /
• 제22권49호
• /
• pp.153-161
• /
• 1999

GUI(Graphic User Interface) have an influence on end-user environments in information system. Consistency is one of the most important GUI characteristics. Consistency should apply across the different media which form the total user interface. User can get a lot of benefits through consistency. To achieve consistency of the total interface, the interface standards are very important. The goals of this study is to suggest GUI's development guidelines through analysis of real fields using ERP package in a electric assembly line. The guidelines fall into four functions: inquiry, registration, modification, deletion. The guidelines can be used for better system development later and as verification tool in GUI development.

• International Journal of Precision Engineering and Manufacturing-Green Technology
• /
• 제5권5호
• /
• pp.571-581
• /
• 2018

In the present study, monitoring of elliptical vibration cutting process by utilizing internal data in the ultrasonic elliptical vibration device without external sensors such as a dynamometer and displacement sensor is investigated. The internal data utilized here is the change of excitation frequency, i.e. resonant frequency of the device, voltages applied to the piezoelectric actuators composing the device, and electric currents flowing through the actuators. These internal data change automatically in the elliptical vibration control system in order to keep a constant elliptical vibration against the change of the cutting process. Correlativity between the process and the internal data is described by using a vibration model of ultrasonic elliptical vibration cutting and verified by several experiments, i.e. planing and mirror surface finishing of hardened die steel carried out with single crystalline diamond tools. As a result, it is proved that it is possible to estimate the elements of elliptical vibration cutting process, e.g. tool wear and machining load, which are important for stable cutting in such precision machining.

• Journal of Power Electronics
• /
• 제19권1호
• /
• pp.296-306
• /
• 2019

The flyback topology is being widely used in power adapters. The coupling capacitance between primary and secondary windings of a flyback transformer is the main path for common-mode (CM) noise conduction. A Y-cap is usually used to effectively suppress EMI noise. However, this results in problems in space, cost, and the danger of safety leakage current. In this paper, the CM noise behaviors due to the electric field coupling of the transformer windings in a flyback adapter with synchronous rectification are analyzed. Then a scheme with balance winding is proposed to reduce the CM noise with a transformer winding design that eliminates the Y-cap. The planar transformer has advantages in terms of its low profile, good heat dissipation and good stray parameter consistency. Based on the proposed scheme, with the help of a full-wave simulation tool, the key parameter influences of the transformer PCB winding design on CM noise are further analyzed. Finally, a PCB transformer for an 18W adapter is designed and tested to verify the effectiveness of the balance winding scheme.

• Journal of East-Asian Urban History
• /
• 제2권2호
• /
• pp.201-234
• /
• 2020

In recent years, the studies on the student movement in Republican China have been more accurate. However, some areas still remain uncovered, such as the technology of student movement. In this paper, the author focuses on how students utilize sound tools in their movements, especially in public meetings. During the May 4^th Movement and the 1920s, Chinese students mainly used speaking trumpets without electricity. In the 1930s, electric tools began to appear in student movement for sound propagation. In the student movement of postwar China, students of various political positions could make a use of loudspeaker, wired broadcasting, and megaphone or other equipments. The battle of sound had been part of the Chinese civil war. In general, sound tools had taken an important role in the history of student radicalism.

• 한국초전도ㆍ저온공학회논문지
• /
• 제12권2호
• /
• pp.21-24
• /
• 2010

This paper deals with numerical analysis on a high-$T_c$ superconducting (HTS) electrodynamic suspension (EDS) simulator according to the variation of the ground conductor conditions. Because the levitation force of EDS system is formed by the magnetic reaction between moving magnets and fixed ground conductors, the distribution of the magnetic flux on a ground conductor plays an important role in the determining of the levitation force level. The possible way to analyze HTS EDS system was implemented with 3D finite element method (FEM) tool. A plate type ground conductor generated stronger levitation force than ring type ground conductor. Although the outer diameter of Ring3 (335 mm) was larger than that of Ring2 (235 mm), the levitation force by Ring2 was stronger than that by Ring3. Considering the results of this paper, it is recommended that the magnetic flux distribution according to the levitation height and magnet current should be taken into account in the design of the ground conductors.

• 대한핵의학회지
• /
• 제30권1호
• /
• pp.130-138
• /
• 1996

전기화상후 조직이나 뼈의 상태를 관찰하고 창상변연절제술, 피부판 이식후 경과 관찰 및 절단술여부와 부위를 정하는 데 골스캔이 지표가 되고 골결손이 있는 환자에서 피부판 이식술 시행후 경과가 호전되었는지 여부를 알기 위해 골스캔검사가 유용하다고 알려져 있다. 본 연구에서는 1991년부터 1995년 11월까지 본원에 내원한 전기화상 환자중 골스캔 및 경과관찰이 가능했던 37명을 대상으로 골스캔의 유용성을 조사하였다. 골스캔 시행시기는 대상환자 37명 모두에서 1주일이 내에 골스캔을 시행하였다. 저압전류에 수상한 환자는 8명, 고압전류에 수상한 환자는 29명이었다. 유입부별 분포를 보면 수부가 27례, 두부가 6예, 견관절부위가 2예, 좌흉벽부위가 1예, 수혜부위가 1예로 나타났다. 사출부별 분포는 저압전류 8명에서는 사출부위를 찾을 수 없었고 고압전류 29명중 족부가 22예, 수부가 3예, 견관절부위가 2예, 좌측 흉부가 1예, 둔부부위가 1예 순으로 나타났다. 유입부의 골스캔 소견은 저압전류에 손상받은 환자8명 모두 봉와직염 소견을 보였고 고압전류에 손상받은 환자 29명줌 15명은 골수염, 10명은 봉와직염, 4명은 골결손 소견으로 나타났다. 사출부의 골스캔 소견은 저압전류 손상 8명을 제외한 고압전류 손상 환자29명 모두 봉와직염 소견을 보였다. 피부이식이나 피부판 이식술 시행후 추적관찰이 가능했던 4명의 환자모두 피부이식이나 피부판 이식술 시행후, 골결손 부위가 좋아지는 것을 관찰할 수 있었다. 심근에 섭취가 증가된 경우가 2예, 간에 섭취가 증가된 경우가 1예, 신장에 섭취가 증가된 경우가 6예였는데, 혈청 칼슘농도, 심전도, 심근 효소, 간기능 검사 및 신기능 검사상에서는 이상이 없는 것으로 나타났다. 결론적으로 골스캔은 전기화상후 손상부위를 평가하는데 도움이 되고 봉와직염과 골수염의 감별진단, 피부이식이나 피부판 이식술후 평가에 도움이 된다. 그러나 인체 내부 장기의 손상평가는 앞으로 많은 연구가 필요할 것으로 생각된다.