본 논문은 수직 오리피스 이젝터의 혼합유동 및 산소전달 특성에 대한 실험적 연구를 목적으로 한다. 실험장치는 전동 모터-펌프, 오리피스 이젝터, 순환 수조, 공기압축기, 고속 카메라 시스템 그리고 제어 및 측정기기로 구성하였다. 측정된 구동유체 및 유입공기의 유량을 이용하여 유량비를 도출하였다. 이적터에서 분출된 혼합유동의 가시화를 통해 정성적 거동을 고찰하였으며, 용존산소 농도를 측정하여 총괄 산소전달계수를 도출하였다. 구동유체의 유량이 일정하고 압축기의 공기압이 높아지면 유량비와 산소전달계수는 증가하며, 압축기의 공기압이 일정하고 구동유체의 유량이 증가하면 유량비는 감소하지만 산소전달계수는 증가하였다. 기포의 크기에 따른 체류시간 및 확산도와 수직 혼합유동의 도달거리는 2 상의 접촉면적과 시간에 크게 영향을 미치기 때문에 산소전달율의 중요한 변수임을 유추할 수 있다.
Indoor air quality is affected by source strength of pollutants, ventilation rate, decay rate, outdoor level, and so on. Although technologies measuring these factors exist directly, direct measurements of all factors are not always practical in most field studies. The purpose of this study was to develop an alternative method to estimate these factors by application of multiple measurements. For the total duration of 30 days, daily indoor and outdoor $NO_2$ concentrations were measured in 30 houses in Brisbane, Australia, and for 21 days in 40 houses in Seoul, Korea, respectively. Using a box model by mass balance and linear regression analysis, penetration factor (ventilation divided by sum of air exchange rate and deposition constant) and source strength factor (emission rate divided by sum of air exchange rate and deposition constant) were calculated, Sub-sequently, the ventilation and source strength were estimated. In Brisbane, the penetration factors were $0.59\pm0.14$ and they were unaffected by the presence of a gas range. During sampling period, geometric mean of natural ventilation was estimated to be $l.l0\pm1.5l$ ACH, assuming a residential $NO_2$ decay rate of 0.8 hr^{-1}$ in Brisbane. In Seoul, natural ventilation was $1.15\pm1.73$ ACH with residential $NO_2$ decay rate of 0.94 hr^{-1}$ Source strength of $NO_2$ in the houses with gas range $(12.7\pm9.8$ ppb/hr) were significantly higher than those in houses with an electric range $(2.8\pm2,6$ ppb/hr) in Brisbane. In Seoul, source strength in the houses with gas range were $l6.8\pm8.2$ ppb/hr. Conclusively, indoor air quality using box model by mass balance was effectively characterized.
Decomposition efficiency, power consumption, and applied voltage of CFC(Chlorofluorocatbon) were investigated by SPCP(surface induced discharge plasma chemical processing) reactor to obtain optimum process variables and maximum decomposition efficiencies. Decomposition efficiency of CFC-12 with various electric frequencies(5~50kHz). flow rates (100~1,000mL/min), initial concentrations(100~1,000ppm), electrode materials(W, Cu, Al). electrode thickness(1, 2, 3mm) and reference gases($N_2$, $O_2$, air) were measured and the products were analyzed with FT-IR. Experimental results showed that at the frequency of 10kHz, the highest decomposition efficiency of 92.7% for CFC-12 were observed at the power consumptions of 29.6W. respectively, and that decomposition efficiency decreased with increasing frequency above 20kHz and decomposition efficiency per unit power were 3.13%/W for CFC-12. Decomposition efficiency was increased with increasing residence times and with decreasing initial concentration of pollutants. Decomposition efficiency was increased with increasing thickness of discharge electrode and the highest decomposition efficiency was obtained for the electrode diameter of 3m. As the electrode material, decomposition efficiency was in order that tungsten(W), copper(Cu), aluminum (Al). Decomposition of CFC-12 in the reference gas of $N_2$ showed the highest efficiency among three reference gases, and then the effect of reference gas on the decomposition efficiency decreased in order of air and $O_2$. The optimum power for the maximum decomposition efficiency was 25.3W for CFC.
This study revealed the differences in runoff processes of granite drainage basins in Korea and Mongolia by hydrological measurements in the field. The experimental drainage basins are chosen in Korea (K-basin) and Mongolia (M-basin). Occurrence of intermittent flow in K-basin possibly implies that very quick discharge dominates. The very high runoff coefficient implies that most of effective rainfall quickly discharge by throughflow or pipeflow. The Hortonian overlandflow is thought to almost not occur because of high infiltration capacity originated by coarse grain sized soils of K- basin. Very little baseflow and high runoff coefficient also suggest that rainfall almost does not infiltrate into bedrocks in K-basin. Flood runoff coefficient in M-basin shows less than 1 %. This means that most of rainfall infiltrates or evaporates in M-basin. Runoff characteristics of constant and gradually increasing discharge imply that most of rainfall infiltrates into joint planes of bedrock and flow out from spring very slowly. The hydrograph peaks are sharp and their recession limbs steep. Very short time flood with less than 1-hour lag time in M-basin means that overland flow occurs only associating with rainfall intensity of more than 10 mm/hr. When peak lag time shows less than 1 hour for the size of drainage area of 1 to 10 km2, Hortonian overland flow causes peak discharge (Jones, 1997). The results of electric conductivity suggest that residence time in soils or weathered mantles of M-basin is longer than that of K-basin. Qucik discharge caused by throughflow and pipeflow occurs dominantly in K-basin, whereas baseflow more dominantly occur than quick discharge in M-basin. Quick discharge caused by Hortonian overlandflow only associating with rainfall intensity of more than 10 mm/hr in M-basin.
소비자들은 과거의 성능에 집중된 선택에서부터 PC의 기능성에 주목하는 새로운 시각으로 점차 변화하고 있다. 본 연구에서는 주거 편의 시설 속에서의 사용자 요구와 유비쿼터스 환경이 맞물려 생성된 새로운 제품으로서의 맞춤형 컴퓨터로 범위를 제한하였다. 현재의 컴퓨터시장을 분석하여 가정 내 유비쿼터스 구현에 잠재된 가능성이 가장 높은 방식과 디자인 고려사항들을 제시하는 것에 본 연구의 목적이 있다. 현재의 컴퓨터시장을 분석한 결과 조립형PC의 일환인 베어본 PC가 가정 내 유비쿼터스 시스템 구현에 가장 현실적인 방법으로 확인되었다. 본 연구는 베어본 PC의 모듈화에 관한 것으로, 모듈러 시스템을 도입한 차세대 신개념 베어본 PC의 잠재된 가능성을 제시하였다. 기존의 베어본 PC는 반제품 PC의 개념이나, 본 고에서는 생활 가전의 영역을 연결하는 확장된 모듈화 베어본 PC를 제안하였다. 사용자의 이용 환경과 목적에 따라 특화된 기능을 제공하며 이제 적합한 형태로 제시할 수 있는 고객 맞춤화 PC디자인의 가능성을 상관요소분석과 우선순위 그리고 모듈화 요소분석을 통하여 검증하였다.
Analysis of the change in water content and distribution was conducted according to the supply of recirculation water to a landfill. An excavation sample analysis showed that the recirculation water injection zone had water content 8.8% point higher than that of the non-injection zone, after 8 months of operation. And due to the influence of recirculation water supply by vertical wells in injection zones, the water content increases along with depth more clearly than non-injection zone. According to an electrical specific-resistivity survey after 13 months of operation, the water content got higher towards the bottom of the landfill. The water transmission coefficient is 8.72×10-4 cm/sec for injection zones and 3.36×10-5 cm/sec for the intermediate cover layer; analysis shows that the intermediate cover layer may affect the penetration velocity of water supplied by the horizontal injection tube. For the scientific design and operation of re-injection facilities, it was deemed necessary to follow-up research on the residence time and behavior of re-injection water considering the ratio of recirculation water supply in horizontal and vertical tubes, and pitcher coefficient of intermediate and waste layers.
본 연구에서는 충진층 플라즈마 반응기의 특성 및 에틸렌을 분해하는데 있어서 플라즈마 반응기의 직렬 및 병렬 배열에 따른 영향에 대해 조사하였다. 플라즈마 방전 개시 전의 반응기 유효 커패시턴스는 ${\gamma}$-알루미나 펠릿이 충진된 경우가 충진되지 않은 경우보다 컸으나, 일단 플라즈마 방전이 개시되고 나면 ${\gamma}$-알루미나 충진 여부와 관계없이 유효 커패시턴스가 유사하였다. 플라즈마 상태에서 생성되는 전자의 에너지는 전기장세기에 크게 의존하며, 0~20%(v/v) 범위의 산소농도(질소 : 80~100% (v/v))에서는 기체조성에 크게 영향을 받지 않는 것으로 나타났다. 플라즈마 상태에서 생성되는 여러 활성 성분들 중 바닥상태의 산소원자 및 오존이 산화 반응에 주로 관여하며, 전기장세기가 높아질수록 산소원자가 상대적으로 감소하는 대신 질소원자의 분율이 급격히 증가한다. 플라즈마 공정에서 전압, 방전 전력, 기체 유량, 체류시간 등 반응기의 성능에 영향을 주는 여러 가지 파라미터들이 있지만, 모든 파라미터들이 비에너지밀도 하나로 통합될 수 있음을 확인하였으며, 직렬 및 병렬로 연결된 반응기의 성능도 비에너지밀도만의 함수로 간주할 수 있으므로 반응기 설계 과정이 크게 단순화될 수 있다. 비에너지밀도의 함수로 나타낸 반응속도상수를 이용하여 계산한 결과도 실험데이터를 잘 예측할 수 있었다.
본 연구에서는 전력연구원으로부터 공급받은 건식 흡수제인 sorbA를 이용하여 기포 유동층 반응기에서 $CO_2$ 흡수반응 특성을 살펴보았다. sorbA는 $CO_2$ 흡수를 위한 탄산나트륨과 내마모성과 기계적 강도를 위한 지지체로 구성되어 있다. $CO_2$ 흡수는 $50-70^{\circ}C$의 온도 범위에서, 재생은 $120-300^{\circ}C$의 온도 범위에서 이루어졌다. 반응시작 전 sorbA에 일정량의 물을 미리 함유하게 한 경우, $50^{\circ}C$에서 반응 초기 1-2분 동안 100%의 $CO_2$ 제거율을 보였다. 고온에서 재생되는 경우 반복 실험으로 인한 흡수제의 반응성과 제거 용량의 저하는 없었다. NMR 스펙트럼을 통해서 흡수반응과 재생반응 후 시료의 성분을 파악하였다. 본 연구에서 얻어진 결과는 두 개의 유동층 반응기를 가진 연속장치의 설계와 운전에 중요한 기초자료가 될 것이다.
우리나라에서 발생한 화재 원인조사 대부분은 소방관서에서 초기조사, 경찰관서에서 수사가 진행되고 있으며, 보다 난해하거나 이해관계가 복잡한 경우인 일부만이 경찰에서 심도 있게 조사하고 경찰조사 시 감정이 필요한 경우 감정기관에 감정의뢰 후 경찰관서 자체조사만으로 끝나며, 점차 전문기관에 의뢰되고 있는 건수가 증가하고 있는 실정이나 많은 문제점을 안고 있어 이에 대안을 제시한다. 국내 화재사고 발생 건수는 소방방재청 통계 연간 약 30만 건으로 추산되나, 전국 경찰화재감식 전문 요원(국립과학수사연구소 전문화 교육 이수자)은 80여명에 지나지 않으며, 국립과학수사연구소 화재감정 관련 연구원은 전국에 15명인 것에 비추어 사건화 된 화재에 대한 감식 감정 인력은 턱없이 모자라 과중한 업무를 수행하고 있는 실정이다. 가연성 액체에 의한 방 실화 시 바닥재의 연소형태를 비교 연구함으로써 연소에 사용된 연소촉매제에 대하여 추론 할 수 있는 연구를 실시하여 모델을 제시하였다. 화재사건 관련 감식 감정 업무를 담당하고 있는 경찰 및 국립과학수사연구소의 과중한 업무의 부담인 의뢰 건수의 폭주로, 경찰 화재 감식의 대상 중 범죄혐의(방화, 실화 등)가 있는 사건은 전체 조사 건수의 20% 미만이고, 나머지 80%에 달하는 사건이 범죄혐의 없는 제조물 관련 또는 이재 관계의 민사 소송 사건에 지나지 않는 것이 현실이다. 본 연구는 경찰화재조사 및 소방화재조사에 대한 검토와 문제점 대안 등을 제시하여 화재사건과 관련하여 경찰 소방 양 기관에서 합동으로 사건을 처리하는 것이 과오를 범하지 않는 효율적이고 과학적인 수사가 될 수 있다는 제도개선이 필요함이 요구된다.
최근의 경제성장과 아울러 우리의 주거 공간이 보다 더 확장되어 가는 추세에 있다. 따라서 PAC (PACKAGE AIR CONDITIONER) 가 종래에는 주로 업소 설치용으로 판매되었으나 최근에는 하절기 상품으로써 생활수준의 향상과 함께 업소용에서 가정용으로 옮겨가는 상태에 있다고 볼 수 있다. PAC는 최근의 기후 온난화 현상에도 영향을 받아 날로 그 수요가 늘어나고 있으며 필수품 화되어 가는 추세에 있다. 본 연구는 국내에 대표적인 가전 업체인 (주)금성사에서 추진 개발되었던 PAC의 제품개발과 DESIGN PROCESS에 대한 사례 연구로서 기업에서의 제품개발과 디자인이 어떠한 연구와 과정을 통해 이루어지는가에 대해 고찰에 보았으며 이러한 연구과정을 토대로 조형화(가사 화) 시키는데 역점을 두었다. 예컨대 우선 하절기 상품인 만큼 기후에 따른 한국인의 체질과 그 특수성을 알아보았으며 고객 환경으로써 PAC의 표적고객을 설정하여 그 수요를 예측해 보았다. 고객 환경으로써 PAC의 표적고객을 설정하여 그 수요를 예측해 보았다. 그리고 PAC와 직접적인 관계가 있는 주거환경으로써 APT 거주지의 거실에서의 행위를 분석하였으며 아울러 거실의 전반적인 INTERIOR IMAGE를 분석하여 PAC의 조형화 작업에 일조를 하였다. 실질적인 조형화 작업에 있어서는 DESIGN CONCEPT을 고객환경, 주거환경, 제품 환경으로 나누어 다음과 같이 추진하였다. 첫째. 성 SPACE화로써 설치공간의 극소화 및 시각적 개방 감을 유도하는 NEW SHAPE(ROUND SLIM)을 구현하였고 둘째. INTERIOR화로써 거실의 분위기와 조화되는 제품의 고급 감을 표출하였다. 셋째. HIGH-TOUCH화로 사용자의 감성을 자극하는 SHAPE 및 표면 처리에 역점을 두었고 넷째로, HI-QUALITY화로써 전자제품에서 보여지는 TECHNOLOGY IMAGE의 과감한 도입적용을 시도하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.