• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.6-14
• /
• 2007

The objective of this research is to comparative LCA(life cycle assessment) between two different model of Electric Motor Unit(EMU).the environmental impact of Aluminum body Electric Motor Unit(EMU) and Stainless Steel(STS) body Electric Motor Unit(EMU). LCA process consists of four steps which are goal, scope definition, life cycle impact analysis(LCIA) and life cycle interpretation. ISO 14044 provides the LCA standard method which can be conducted by using comparative LCA. From the research it is foung that the Aluminium Body Electric Motor Unit (EMU) is 3.6ton heaver than Stainless Steel(STS) body Electric Motor Unit(EMU). The system boundary of both Electric Motor Unit (EMU) are same life span and travel same distance. These both Electric Motor Unit (EMU) has same kind of environmental impact which is maximum Ozone Depletion(OD). During using period of these two models, the Aluminium Body Electric Motor Unit(EMU) has more global warming(GW) effect but Stainless Steel(STS) body Electric Motor Unit(EMU) has more Ozone Depletion(OD) effect. The above result is obtained by using LCA software PASS verson 3.1.3.

• 한국정보통신학회논문지
• /
• 제9권3호
• /
• pp.498-503
• /
• 2005

Turbine Load Set Motor장치는 노후화 된 화력 발전소에서 출력 부하를 결정하는 중요한 장치로서, Motor를 가변하면서 발전 출력 부하를 조정하게 된다. 이러한 종래 발전시스템에서는 Set Up Range를 운영자가 수동으로 조작한 Set Up값에 따라 Motor를 회전시키게 되며, Motor를 포함한 내부적 동작에 의해서 발전 출력 부하 결정이 이루어지게 된다. 따라서 본 논문에서는 수동적으로 출력부하를 작동되는 Turbine Motor Drive Unit를 대처할 수 있는 Digital Drive Unit 장치를 개발하여 기존 Turbine Load Set Motor 성능을 지닐 수 있는 장비를 구현한다. 또한 구현한 Digital Drive Unit을 바탕으로 발전 출력 부하를 결정하는 기본 기능을 기존 Motor Drive Unit과 연결하여 작동될 수 있도록 제어 알고리즘 구현과 구현된 제어 시스템을 통해 기존 Turbine Load Set Motor Drive와 연결 가능성을 확인한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.950-954
• /
• 1998

This paper describes a development of traction unit for 2-motor driven electric vehicle (EV). The traction unit is consisted with an interior permanent magnet synchronous motor (IPMSM), a reduction gear and an inverter for electric vehicle that is driven by 2 motors without differential gear. For traction unit, prototype IPMSM and inverter have been developed. The IPMSM was designed by CAD program that was developed with both equivalent circuit method and FEM. Also the inverter was developed to drive 2 motors with 6 legs IGBT switches in a control board. The vector control algorithm was implemented with maximum torque control method in the constant torque region and field weakening control method in the constant power region considering inverter capacity. To verify that the traction unit is more high efficiency and has more high power density than a traction unit with induction motor with the same power, we would like to show the results about the design and analysis of the IPMSM and the experiment results about the traction unit.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권2호
• /
• pp.90-96
• /
• 2003

This paper deals with the design and the characteristic analysis of a coreless axial flux permanent magnet (AFPM) motor. Because a direct-drive wheel motor is easily derived from it, the AFPM motor is very suitable for application in an electric scooter. Compared to a conventional motor of the same size and weight, the AFPM motor is proven to have more power and torque per unit weight. In this paper, an AFPM coreless motor with a double-sided rotor disk equipped with Nd-Fe-B rare earth magnets is designed and a prototype of the motor is manufactured, which will be properly applied for the low-speed, and high-torque direct drive required for the electric scooter. The manufactured prototype of the motor has a rating of 300W, 510rpm, 5.6Nm, and 85% efficiency.

• 한국철도학회논문집
• /
• 제8권6호
• /
• pp.581-585
• /
• 2005

In this study, the environmental impacts of a bogie in the electric motor unit(EMU) were evaluated quantitatively using simplified life cycle assessment(S_LCA). Target was the bogie and life cycle inventory(LCI) database for the bogie was established. The software used for simplified LCA was PASS. Environmental impacts with the parts of the bogie were dependent on their weight significantly. Among impact categories, abiotic resource depletion(ARD) and global warming(GW) were shown dominantly. Global warming was occurred mainly due to the emission of CO₂released from energy consumption and abiotic resource depletion was caused mostly by the consumption of iron ore for the manufacturing of steel. Therefore, the environmental impacts of the bogie could be reduced by the light-weighting of EMU and the improvement of energy efficiency.

• 한국철도학회논문집
• /
• 제9권5호
• /
• pp.517-523
• /
• 2006

The sustainable development is a key issue in the whole field of economy, culture and society, which can be accomplished by the improvement of environment. Recently, life cycle assessment(LCA) has been applied to reduce environmental impacts preliminarily by evaluating the environmental performance of a product through its life cycle. In this study, life cycle assessment was performed to analyze quantitatively the environmental impact on the interior panel of electric motor unit(EMU). As a result, the interior panel with aluminum showed the most global warming(GW), while that with phenol and plastic showed high fresh water aquatic ecotoxicity(FAET) and marine water aquatic ecotoxicity(MAET), respectively. Global warming was occurred mainly due to the emission of $CO_2$ by energy consumption. FAET and MAET were caused by the pollutants released from acid-washing and paints coating process. Therefore, an environmental-friendly EMU can be designed considering the environmental impacts of interior panel.

• 한국기계가공학회지
• /
• 제14권5호
• /
• pp.113-119
• /
• 2015

The technical development of electric vehicles has been actively proceeding because of the reduction of oil resources and need for eco-friendly vehicle technology. In particular, an electronic control unit is an important element in the technology of electric vehicles due to the motor drive system. This paper concerns an experimental study on the thermal analysis of the steering control ECU structure for an electric vehicle. The ECU unit is designed for eight heat sinks for the thermal analysis of the ECU structure. The thermal analysis characteristics of the ECU structure are evaluated by the temperature distribution, heat flow, von Mises stress, total translation, and external surface temperature measurement of the ECU unit.

• 전력전자학회논문지
• /
• 제13권6호
• /
• pp.420-429
• /
• 2008

본 논문에서는 하이브리드 자동차용 전력변환 장치인 HDC(High side DC/DC Converter)와 MCU(Motor Control Unit)의 제어 전략과 설계 결과를 설명한다. MCU와 HDC가 차량용 부품임을 감안하여 그 설계의 관점을 출력밀도 향상과 신뢰성 확보에 두고 있다. 이를 위해 제어기로는 고성능의 MPC5554 CPU를 기반으로 설계하였고, 수동 소자인 인덕터와 커패시터도 효율 최적화의 관점에서 제작하였으며, 전력용 반도체로는 세미크론사의 자동차용 모듈인 Skim63을 사용하였다. 방열기관의 전산해석을 통해 최적의 방열모델을 선정하였고 시뮬레이션을 통해 그 타당성을 검증하였다. 본 연구의 제어 전략과 각 부품의 성능은 실험벤치 및 실차 실험을 통하여 그 타당성을 검증하였고 보완설계 과정을 통하여 신뢰성을 확보하였다.

• 한국철도학회논문집
• /
• 제10권5호
• /
• pp.596-599
• /
• 2007

전동차 내장패널에 대한 비교전과정평가를 실시하였다. ISO14044 표준과 에코인디케이터 99 방법론, SimaPro 7.0 software, Ecoinvent DB를 이용하여 전과정목록 DB를 구축하고 LCA를 수행하였다. 전동차 내장패널의 환경성 측면에 대한 일반적인 예상에 대하여 LCA를 통한 검증을 수행하였다. 전동차 내장패널의 중량이 환경성과 상관이 있음에도 불구하고 상대적 중요도는 높지 않았으며, Al 내장패널의 경우 사용단계의 환경영향이 가장 큼에도 불구하고 타 재질 내장패널에 비해 제작단계의 환경영향이 주요환경이슈로 도출되었다. Al 내장패널의 경우, 재활용으로 인한 환경편익이 크나, 장기적으로는 제작단계의 환경영향을 저감하여야 타 재질 대비 환경성 측면의 경쟁력을 강화할 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.175-177
• /
• 2007

This paper presents for the torque characteristics and improving the efficiency of driving system of electric bicycle which applied IEWPM(Independently Excited Winding Permanent Magnet) motor. IEWPM motor can expand the number of phase from 3 phases to multiphase like SRM motor because stator windings are unconnected directly. BLDC motor raise rotor'-s electromagnetic torque per unit volume by using Spoke type permanent magnet. By using two photo sensor per phase and applying excited width, advance angle and bipolar control, we confirmed higher torque at a low speed, higher out-put at a high speed, and efficiency improvement at a wide speed control area.