• 소음진동
• /
• 제10권2호
• /
• pp.299-305
• /
• 2000

In this study, the characteristics of transmitted vibration on hand-arm system are examined when operating electric hand tools. Also through the correlation analysis between anthroponetric data and transmitted vibration, and comparison study with appropriate amount of work done based on the ISO criteriaa, the basic data for the ergonomic work design can be presented. The types of electric tools and works for the experiment are drill (general type and impact type), grinder, wire brush and steel to analyze the characteristics of transmitted vibrations, the amount of transmitted vibrations in X, Y and Z direction at tool(T), hand(H), wrist(W), and the joint between foream and upper arm(A) were measured at the frequency range of 6.3∼1000[HZ]. Also, the limit of human exposure to vibration, and the response of frequency were conducted.

• Archives of Plastic Surgery
• /
• 제46권1호
• /
• pp.63-68
• /
• 2019

Background Hand injuries caused by chain saws, electric saws, and hand grinders range from simple lacerations to tendon injuries, fractures, and even amputations. This study aimed to understand the distribution of various types of hand and upper extremity injuries caused by power tools, in order to help prevent them, by investigating the incidence and cause of power tool injuries treated over a 4-year period at a single institution in Korea. Methods We reviewed the medical records of patients who visited a single institution for power tool-induced injuries from 2011 to 2014. The distribution of sex, age, injured body part, type of injury, and mechanism of injury sustained by patients who received hand and upper extremity injuries from using an engine saw, electric saw, or hand grinder was evaluated. Results Among 594 subjects who were injured by power tools, 261 cases were hand and upper extremity injuries. The average age was 53.2 years. Tendon injury was the most common type of injury. An electric saw was the most common type of power tool used. More injuries occurred in non-occupational settings than in occupational settings. Conclusions In this study, power tool-induced hand and upper extremity injuries were mostly caused by direct contact with electric saw blades. More injuries occurred due to non-occupational use of these tools, but the ratios of amputations and structural injuries were similar in the non-occupational and occupational groups.

• International Journal of Advanced Culture Technology
• /
• 제2권2호
• /
• pp.11-14
• /
• 2014

In the smart grid, it will be possible to communicate with the consumers for the purposes of monitoring and controlling their power consumption without disturbing their business or comfort. This will bring easier administration capabilities for the utilities. On the other hand, consumers will require more advanced home automation tools which can be implemented by using advanced sensor technologies. For instance, consumers may need to adapt their consumption according to the dynamically varying electricity prices which necessitates home automation tools. This paper tries to combine neural network and nonlinear autoregressive with exogenous variable (NARX) class for next week electric load forecasting. The suitability of the proposed approach is illustrated through an application to electric load consumption data. The suggested system provides a useful and suitable tool especially for the load forecasting.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.53-55
• /
• 2007

Industrial interest in switched reluctance moor (SRM) drives has varied since 1850s. This has been primarily due to the emerging markets for variable speed drives in consumer and industrial products, such as home appliances, air conditioning, hand tools, fans, pump motor, etc. However, SRM has been plagued with the acoustic noise and vibration problem by input power of fixed section. Therefore, This paper offers electromagnetic analysis for torque ripple reduction in mechanical geometry and electric parameters. This means that the rotor pole arc and electric parameters have related to produce the active and negative torque. This analysis results are verified by the finite element method.

• 전기학회논문지
• /
• 제57권3호
• /
• pp.514-517
• /
• 2008

Ubiquitous healthcare (U-healthcare) system is one of potential applications of embedded system. Conventional U-healthcare systems are used in health monitoring or chronic disease care based on measuring and transmission of various vital signs. However, future U-healthcare system can be of benefit to more people such as stroke patients which have limited activity by providing them proper medical care as well as continuous monitoring. Recently, an electric brain stimulation treatments have been found to be a better way compared to conventional ones and many are interested in using the method toward the treatment of stroke. In this study, we proposed a remote medical treatment system using ZigBee-based wireless electric brain stimulator that can help them to get a treatment without visiting their doctors. The developed remote medical treatment system connects the doctors to the brain stimulator implanted in the patients via the internet and ZigBee communication built in the brain stimulator. Also, the system receive personal information of the connected patients and cumulate the total records of electric stimulation therapy in a database. Doctors can easily access the information for better treatment planning with the help of graphical visualization tools and management software. The developed remote medical treatment system can extend their coverage to outdoors being networked with hand-held devices through ZigBee.

• 산업경영시스템학회지
• /
• 제44권3호
• /
• pp.98-105
• /
• 2021

The sensory stimulation of a cosmetic product has been deemed to be an ancillary aspect until a decade ago. That point of view has drastically changed on different levels in just a decade. Nowadays cosmetic formulators should unavoidably meet the needs of consumers who want sensory satisfaction, although they do not have much time for new product development. The selection of new products from candidate products largely depend on the panel of human sensory experts. As new product development cycle time decreases, the formulators wanted to find systematic tools that are required to filter candidate products into a short list. Traditional statistical analysis on most physical property tests for the products including tribology tests and rheology tests, do not give any sound foundation for filtering candidate products. In this paper, we suggest a deep learning-based analysis method to identify hand cream products by raw electric signals from tribological sliding test. We compare the result of the deep learning-based method using raw data as input with the results of several machine learning-based analysis methods using manually extracted features as input. Among them, ResNet that is a deep learning model proved to be the best method to identify hand cream used in the test. According to our search in the scientific reported papers, this is the first attempt for predicting test cosmetic product with only raw time-series friction data without any manual feature extraction. Automatic product identification capability without manually extracted features can be used to narrow down the list of the newly developed candidate products.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.263-269
• /
• 1996

In indian agricultural , the energy use pattern has played dominant role in influencing the level of mechanization . Besides that the agro-climatic factors as well as the size of holdings do affect the degree of mechanization . Nearly 30 percent of total cultivated area is owned by l76 percent of the small and tiny land holders each owning even less than a hectare. On the other hand, about 2 percent of land owners cultivate land. These variabilitieshave greatly influenced the ownership of power sources on Indian farms. Small farmers, employ human and animal energies with the use of hand tools and animal drawn equipments. Whereases, the use of tractors, power tillers, electric motors, etc. on small farms is on a marginal scale. There are few pockets and also extensive wheat growing regions where mechanical and electrical power sources are extensively used in production agriculture leading to about 185% of cropping intensity . In that region, the animal energy is employed for on the farm transport of fertilizers, fodders and fuel to support milch animals and other household activities . Inspite of high degree of mechanization, the harvesting of crops is done by human labour with few exceptions of harvesting wheat crops by combines in few pockets. In overall assessment of mechanization, the following conclusions are drawn : ⅰ) Farm operation which show a growing trend of mechanization are (a) tillge, (b) seedling (c) Irrigation (d) Plant protection application (e) Threshing and (f) Transport . ⅱ) Crop cultivation system in respect of wheat, maize and sorghum have been greatly mechanized. ⅲ) The least mechanized cropping systems are (a) vegetable production and (b) cultivation of sugarcane, cotton, rice and pulses. ⅳ) Annual production of tractor has touched the figure of 280.000 by 1995 and the total number has crossed 1.5million on Indian farms.

• 한국안전학회지
• /
• 제30권5호
• /
• pp.44-51
• /
• 2015

As the domestic communication industry has been made rapid progresses, the construction of base stations are also expanded yearly from more than 86,000 ones in the year 2005 to over 300,000 ones in 2013. While the new construction and rebuilt works have been rapidly increased, there has been not tried about the analysis as well as the control of hazards for the construction works. This study is conducted to do not only the focus interview for 27 expert groups who are engaged in the construction works and safety, but also the questionnaires for AHP analysis which is suggested by the Korea Occupational Safety and Health Agency for 92 persons who are engaged in the construction works in order to analyze the hazards of construction works for base stations. The high ranked risk works which are acquired from the two methods are fall under installation of antennae, struck by the hand tools and construction materials under installation of antennae, fall during going up and down the steel tower and telegraph poles and the fall by electric shock during the underground cable works. The control for the above hazards are the installation of fall protection equipments, the installation of safety nets for falling objects and the installation of protection equipment of electric shock.

• 한국산학기술학회논문지
• /
• 제19권6호
• /
• pp.587-599
• /
• 2018

건물일체형 태양광 발전(BIPV) 시스템은 태양광 모듈을 건축부자재와 결합하여 설치함으로써 주거, 보관, 경제성 요소 등의 건축물 기능을 만족시키면서도 태양광 발전기능을 동시에 수행하기 위한 통합시스템이다. 시스템 통합으로 인해 얻게 되는 장점이 있지만, 태양광 발전기능을 극대화할 수 있는 설계가 필요하다. 선행연구로서 컴퓨터 시뮬레이션과 실증으로 여러 가지 설계요소들이 발전성능에 미치는 영향분석 결과들이 발표되었지만, 발전성능 분석의 부정확성, 설계요소 간의 관계분석의 미흡, 제한된 실증 범위 등이 문제점으로 남아 있다. 이 문제를 해결하기 위해 본 논문에서는 먼저 발전성능을 실증으로 평가할 수 있도록 목업 시험동을 설계 및 구축하고, 실증시스템 운영에서 획득한 데이터의 통계분석을 수행한 결과를 바탕으로 설계 방안을 연구한다. 구체적으로 주요 설계요소로서 모듈의 종류(c-Si, a-Si), 설치각도($90^{\circ}$, $75^{\circ}$, $30^{\circ}$, $15^{\circ}$, $3^{\circ}$), 설치방향(서향, 남서향, 남향, 남동향, 동향) 등을 선택하였다. 선택된 설계요소들의 발전성능에 대한 영향을 분석하기 위해, 1년간의 운영 데이터를 획득하여 통계적인 기법으로 데이터의 유효성을 검증하였으며, 또한 다양한 설계요소들 사이의 관계분석을 통하여 발전성능이 최적화되는 설계안을 제시하였다. 이 연구결과는 향후 BIPV 시스템의 적용성 여부에 대해 판단할 때, 그리고 BIPV 시스템을 설계할 때 설계요소들의 최적 선택에 대한 자료가 될 수 있다.