• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.80-86
• /
• 2011

Solar reforming of methane with CO2 was successfully tested with a direct irradiated absorber on a parabolic dish capable of 5kWth solar power. And the new type of double-layer absorber - the front layer, porous metal foam which absorbs the radiation and transfers the heat from material to gas, and the back layer, catalytically-activated metal foam - was prepared, and its activity was tested by using electric furnace. Ni was applied as the active metal on the gamma-Al2O3 coated Ni metal foam for the preparation of the catalytically-activated metal foam layer. Compared to conventional direct irradiation of the catalytically activated metal foam absorber, this new type of double layer absorber is found to exhibit a superior reaction and thermal storage performance at the fluctuating incident solar radiation. In addition, unlike direct irradiation of the foam absorber, double layer absorber has better thermal resistance, which prevents the emergence of cracks caused by mechanical or thermal shock. The total solar power absorbed reached up to 3.25kW and the maximum CH4 conversion was almost 59%.

• 한국자기학회지
• /
• 제22권6호
• /
• pp.221-227
• /
• 2012

고특성 영구자석은 하이브리드 및 전기자동차의 구동모터와 풍력발전에 적용되면서 크게 주목을 받고 있다. Nd-Fe-B 영구자석은 가장 높은 최대자기에너지적을 가지고 있지만 고온(${\sim}200^{\circ}C$)의 구동환경에서는 보자력이 급격히 감소하기 때문에 사용할 수 없는 단점을 가지고 있다. 그러므로 큰 보자력을 가지는 Nd-Fe-B 영구자석에 대한 개발이 요구되고 있다. Nd-Fe-B 소결자석에서 보자력을 증가시키기 위해서는 Nd를 Dy 또는 Tb으로 치환하면 쉽게 증가시킬 수 있다. 그러나 이들 원소는 Fe와 반강자성 결합을 하여 잔류자속밀도를 낮추고, 적은 매장량과 한정된 지역에 편재되어 있어 수요급증에 따른 자원수급 및 가격 급등의 문제를 가지고 있다. 따라서, Dy 및 Tb과 같은 중희토류를 사용하지 않거나 최소한의 양을 사용하여 보자력을 증가시키고자 하는 연구가 많이 진행되고 있다. 본 논문에서는 이러한 중희토류 원소의 저감 및 대체에 대한 연구들을 소개하고자 한다.

• 한국초등과학교육학회지:초등과학교육
• /
• 제24권5호특별호
• /
• pp.620-626
• /
• 2005

In this study, we conducted a comparative study to investigate the curriculums on electricity and magnetism between in Korean and in Ontario elementary schools in Canada with respect to connectivity and difference among course materials with grades. We compared textbooks that contain the contents about electricity and magnetism, and connectivity in curriculums that were relevant to the science content system in each country. We report the following differences in the curriculums on electricity and magnetism in each country. First, it turns out that science is taught from the first grade in Ontario, while it is taught from the third grade in Korea. Second, Ontario covers electricity and magnetism only in science curriculum, while Korea covers the same topics both in the science and practical arts curriculum. Third, while the curriculum in Korea introduces 'a magnet' in the third grade, 'electricity' in the fourth and the fifth grade, and 'an electromagnet' in the sixth grade, while the curriculum in Ontario covers the concept of energy from the first grade. As the grades go up, the contents of electricity and magnetism tend to be more deepen. It also emphasizes enhancing students' ability that they can communicate what they learn about technology with others, and that they can apply their knowledge to other fields as well. Based on this study of the Ontario curriculum, we suggest that it is necessary for us to n Science curriculum from the first grade, so that the students can learn science from the early grade, without a need to run another subject, like practical arts. We also found that the Korean curriculum has an interesting structure for the young students to learn to apply their knowledge to the real life immediately, based on an idea that the topic of 'Manipulating the electric appliances' in practical arts curriculum moves to the Science.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2009년도 한국우주과학회보 제18권2호
• /
• pp.28.4-29
• /
• 2009

The 'Amon-Ra' instrument of the proposed 'EARTHSHINE' satellite is a dual (i.e. imaging and energy) channel instrument for monitoring the total solar irradiance (TSI) and the Earth's irradiance at around the L1 halo orbit. Earlier studies for this instrument include, but not limited to, design and construction of breadboard Amon-Ra imaging channel, stray light suppression and system performance computation using Integrated Ray Tracing (IRT) technique. The Amon-Ra instrument is required to produce 0.3% in uncertainty for both Sunlight and Earthlight measurement. In this study, we report accurate estimation of the output electric signal derived from the orbital variation of radiant exitance from the Sun and the Earth arriving at the aperture and detector plane of the Amon-Ra. For this, orbital irradiance are computed analytically first and then confirmed by simulation using Integrated Ray Tracing (IRT) model. Specially, the results show the arriving power at the bolometer detector surface is $1.24{\mu}W$ for the Sunlight and $1.28{\mu}W$ for the Earthlight, producing the output signal pulses of 34.31 mV and 35.47 mV respectively. These results demonstrate successfully that the arriving radiative power is well within the bolometer detector dynamic range and, therefore, the proposed detector can be used for the in-orbit measurement sequence. We discuss the computational details and implications as well as the simulation results.

• 한국표면공학회지
• /
• 제39권2호
• /
• pp.57-63
• /
• 2006

In this study, In-base solder was applied to the interface between $Bi_2Sr_2Ca_1Cu_2O_x(Bi_{2212})$ superconductor and Cu-Ni shunt metal at the temperature lower than $150^{\circ}C$. Most of the cases, $Bi_{2212}$ superconductor was precoated with Ag by electroplating in order to improve the contact properties of the solder layer. When the superconductor was directly soldered on to the superconductor, the solder was easily separated without external force. The shear strength of the contact between superconductor and shunt metal increased from 69.2 kgf to 74.4 kgf and 80.1 kgf, as the current density of the Ag electroplating was changed from 63 mA to 96 mA and 126 mA, respectively. The contact strength also increased to 49.9 kgf and 69.2 kgf when thickness of the electroplated Ag layer increased to $5{\mu}m$ and $10{\mu}m$, reapectively.

• 융합정보논문지
• /
• 제10권2호
• /
• pp.1-8
• /
• 2020

국내 정보통신 설비공사에 대한 감리대가 표준품셈은 2009년 5월 (사)한국엔지니어링협회에서 정한 표준품셈을 최근까지 관련 공공기관 및 민간 산업계에서 사용해 왔다. 그러나 정보통신기술과 사회경제적 환경이 매우 빠르게 변화되고 발전되어 기존의 품셈은 최근의 현장 여건에 부합되지 않아 현장 적용률이 저조하고, 공종별 감리원수 산출을 위한 산출식이 복잡하여 적용에 많은 어려움을 갖고 있다. 이러한 여건과 최근의 정보통신 기술의 융복합화에 따른 새로운 공종을 표준품셈에 반영하여 기존 품셈의 보완 및 개정 필요성이 대두되었고, 산업통상자원부에서는 최근 새로운 표준감리 품셈을 개정 고시하였다. 본 논문에서는 저자들이 개정과정에 주도적으로 참여한 경험을 바탕으로 개정 고시된 표준품셈의 개정 배경과 새롭게 제시된 표준 품셈 계산식을 기존 품셈 계산식과 비교하여 설명을 제시하고자 한다. 연구방법으로서 기존의 품셈이 적용된 실사례 조사 결과와 타 분야 품셈을 비교 후 정보통신설비공사 분야의 품셈을 개선하기 위하여 WBS 방식에 기반한 새로운 품셈 산출 수식을 설명한다.

• 콘크리트학회논문집
• /
• 제22권1호
• /
• pp.69-76
• /
• 2010

콘크리트의 수축으로 인한 균열가능성 평가에 있어서 대부분의 경우 콘크리트를 균질한 물질로 가정하는 방식으로 접근하고 있다. 그러나 이러한 방식으로 접근할 경우 불구속조건 하의 콘크리트에서 자기수축으로 인한 미세균열(micro-cracking) 현상을 평가하는 것이 불가능함과 동시에 콘크리트 내부의 균열 발생 현상을 이해하는데 한계가 있다. 이에 이 연구에서는 시멘트 모르타르 시험체를 가지고 실험적으로는 음향방출(acoustic emission) 장비를 사용하여 내부 균열 발생량을 측정 및 평가하였으며, 이론적인 접근방식의 일환으로 실제 모르타르 시험체로부터 구하여진 이차원 이미지를 사용하여 NIST에서 개발한 OOF code로 유한요소해석을 수행하였다. 실험 및 해석 결과, 모르타르의 내부에서 시멘트 페이스트상의 수축 및 골재의 내부구속으로 인하여 발생하는 미세균열 발생 현상을 보다 현실적으로 이해할 수 있었다.

• Journal of Electrochemical Science and Technology
• /
• 제2권1호
• /
• pp.45-50
• /
• 2011

A series of expanded graphites is prepared from graphite oxide by changing the heat-treatment temperature, and their lithiation/de-lithiation mechanism and rate performance are examined. A featureless sloping profile is observed in their charge-discharge voltage and dilatometry profiles, which is contrasted by the stepwise plateau-like profiles observed with the pristine graphite. With an increase in the heat-treatment temperature from $250^{\circ}C$ to $850^{\circ}C$, the interlayer distance becomes smaller whereas the electric conductivity becomes larger, both of which are resulted from a removal of foreign atoms (mainly oxygen) from the interlayer gaps. The expanded graphite that is prepared by a heat-treatment at $450^{\circ}C$ delivers the best rate performance, which seems to be a trade-off between the $Li^+$ ion diffusivity that is affected by the interlayer distance and electrical conductivity.

• 전기화학회지
• /
• 제23권4호
• /
• pp.90-96
• /
• 2020

수소의 화학반응 에너지를 직접 전기 에너지로 변환하는 Polymer electolyte membrane fuel cells (PEMFCs)는 친환경 미래 운송수단 에너지원의 한 종류이다. PEMFCs의 내부에 산소 환원 반응이 매우 느리고 고가의 백금을 사용하기 때문에 이를 대체하려는 연구가 국내외에서 매우 활발히 연구되고 있다. 하지만 백금이외에 값싼 재료를 이용한 촉매의 경우 여전히 성능이 매우 상이하며 활성 향상에 대한 지표 등이 다양하다. 이에 본 총설은 non-precious metal catalyst (NPMC)의 활성 지표 등을 정리하고 최근 5년간의 자료를 요약하였다. 이를 통해 촉매재료의 선별, 합성시 주안점, 조촉매 등을 설명하며, 촉매 활성에 대한 연구의 필요성을 상기 시킬 수 있다. 이를 통해 귀금속 촉매가 널리 사용되는 분야에 적용할 수 있는 NPMC의 연구 및 개발에 기여할 수 있을 것으로 보인다. 또한 향후 연구개발의 최종적인 목표를 기술한다.

• 대한치과보철학회지
• /
• 제45권6호
• /
• pp.769-779
• /
• 2007

Statement of problem. When TiN coating is applied to the abutment screw, occurrence of greater preload and prevention of the screw loosening could be expected due to decrease of frictional resistance. However, the proper thickness of TiN coating on abutment screw has not been yet reported. Purpose. The purpose of this study is to find out the appropriate TiN coating thickness by evaluating the detorque force and the surface change of titanium abutment screw with various TiN coating thickness. Material and methods. 1. Material Thirty five non-coated abutment screws were prepared for TiN coating. TiN coatings were prepared by Arc ion plating method. Depending on the coating deposition time(CDT), experimental groups were divided into 6 groups(CDT 30min, 60min, 90min, 120min, 150min, 180min) and those of 1 group was not coated as a control group. Each group was made up of 5 abutment screws. 2. Methods FE-SEM(Field Emission Scanning Electron Microscoper) and EDX(Energy Dispersive X-ray Spectroscopy) were used to observe the surface of the abutment screw. Electric scales was used to measure the weight of the abutment screw after the repeated closing and opening of 10 trials. Detorque force was measured with digital torque gauge, at each trial. Results. 1. As the coating deposition time increased, the surface became more consistent and smooth. 2. As for the abutment screws that were TiN coated for more than 60 minutes, no surface change was found after the repeated closing and opening. 3. The TiN coated abutment screws showed less weight change than the non-coated abutment screws. 4. The TiN coated abutment screws showed higher mean detorque force than the noncoated abutment screws. 5. The abutment screw coated for 60 minutes showed the highest mean detorque force. Conclusion. The coating layer of proper thickness is demanded to obtain consistent and smooth coating surface, resistance to wear, and increased detorque force of the abutment screw. In conclusion, the coating deposition time of 60 minutes indicated improved mechanical property, when TiN coating was conducted on titanium abutment screw.