• Nuclear Engineering and Technology
• /
• 제52권2호
• /
• pp.248-257
• /
• 2020

This study presents an initial design for a novel system consisting in a coupled nuclear reactor and a phase change material-based thermal energy storage (TES) component, which acts as a buffer and regulator of heat transfer between the primary and secondary loops. The goal of this concept is to enhance the capacity factor of nuclear power plants (NPPs) in the case of high integration of renewable energy sources into the electric grid. Hence, this system could support in elevating the economics of NPPs in current competitive markets, especially with subsidized solar and wind energy sources, and relatively low oil and gas prices. Furthermore, utilizing a prismatic-core advanced high temperature reactor (PAHTR) cooled by a molten salt with a high melting point, have the potential in increasing the system efficiency due to its high operating temperature, and providing the baseline requirements for coupling other process heat applications. The present research studies the neutronics and thermal hydraulics (TH) of the PAHTR as well as TH calculations for the TES which consists of 300 blocks with a total heat storage capacity of 150 MWd. SERPENT Monte Carlo and MCNP5 codes carried out the neutronics analysis of the PAHTR which is sized to have a 5-year refueling cycle and rated power of 300 MW_th. The PAHTR has 10 metric tons of heavy metal with 19.75 wt% enriched UO₂ TRISO fuel, a hot clean excess reactivity and shutdown margin of $33.70 and -$115.68; respectively, negative temperature feedback coefficients, and an axial flux peaking factor of 1.68. Star-CCM + code predicted the correct convective heat transfer coefficient variations for both the reactor and the storage. TH analysis results show that the flow in the primary loop (in the reactor and TES) remains in the developing mixed convection regime while it reaches a fully developed flow in the secondary loop.

• 한국전자파학회논문지
• /
• 제22권8호
• /
• pp.790-796
• /
• 2011

HEMP(High-Altitude Electromagnetic Pulse, 고 고도 전자기 펄스) 신호는 매우 큰 전계 값과 매우 빠른 상승시간 등으로 인해 그 영향 범위 안에 노출되어 있는 시스템은 심각한 손상을 입을 수도 있다. HEMP로부터 시스템을 적절하게 방호하기 위해서는 방호 설계 사양 도출 이전에 시스템의 개구면이나 케이블에 대한 전자기 결합 신호 해석이 먼저 수행되어야 한다. 본 논문에서는 RF 또는 비디오 신호 등을 전송하기 위해 사용되는 동축 케이블에 대한 HEMP 결합 신호를 해석하였고, 차폐선에 대한 HEMP 감소 효과를 확인하기 위해 단일 도선과 동축 케이블 내부 도선에 대한 결합 신호를 비교하였다. 동축 케이블은 차폐선의 외부 영역과 내부 영역으로 각각 분리되어 해석되었으며, 차폐선 표면 위의 전류 계산을 위해 동축 케이블 외부 영역에는 일반화 된 산란방정식을 적용하였고, 동축 케이블 내부 영역에는 Chain Matrix 알고리즘을 적용하였다. 본 논문의 해석 결과를 검증하기 위해 기존 논문의 결과 데이터와 비교하였고, 두 결과가 비슷한 경향을 나타내었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1996년도 춘계 학술대회논문집
• /
• pp.58-67
• /
• 1996

This paper describes some computational results of various energy and environmental systems using Patankar's SIMPLE method. The specific topics handled in this study are jet bubbling reactor for flue gas desulfurization, cyclone-type afterburner for incineration, 200m tall stack for 500 MW electric power generation, double skin and heat storage systems of building energy saving for the utilization of solar heating, finally turbulent combustion systems with liquid droplet or pulverized coal particle. A control-volume based finite-difference method with the power-law scheme is employed for discretization. The pressure-velocity coupling is resolved by the use of the revised version of SIMPLE, that is, SIMPLEC. Reynolds stresses are closed using the standard $k-{\varepsilon}$ and RNG $k-{\varepsilon}$ models. Two-phase turbulent combustion of liquid drop or pulverized coal particle is modeled using locally-homogeneous, gas-phase, eddy breakup model. However simple approximate models are incorporated for the modeling of the second phase slip and retardation of ignition without consideration of any detailed particle behavior. Some important results are presented and discussed in a brief note. Especially, in order to make uniform exit flow for the jet bubbling reactor, a well-designed structure of distributor is needed. Further, the aspect ratio in the double skin system appears to be one of important factors to give rise to the visible change of the induced air flow rate. The computational tool employed in this study, in general, appears as a viable method for the design of various engineering system of interest.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.799-801
• /
• 1988

This paper was studied on the effects of Ca-La-Nb substitution and Zr/Ti ratio variation to Pb(Zr, Ti)$O_3$ system on structural, electrical, optical and sound level characteristics in order to develope the piezoelectric and electrooptic ceramic devices. Also the specimens were prepared by the two stage sintering technique. The molecular formular was X($CaO{\cdot}1/4La_{2}O_{3}{\cdot}1/4Nb_{2}O_{5}){\cdot}(1-X)Pb(Zr_{Y}Ti_{1-Y})O_{3}$(x=100X, y=100Y), and the variation of x was $6{\sim}12$, y was 60${\sim}$49 and second stage sintering time was 20${\sim}$40 hours. The experimental results obtained from this study are as follows : 1. The density was decreased, the grain size was increased according to increase of Ca-La-Nb substitution. 2. The crystal structure was rhombohedral in composition 6/60/40, and the crystal structure was tetragonal and cubic according to increase of Ca-La-Nb substitution. 3. The Ca substitution of PZT system enhanced the sintering property. The Pb site vacancy resulting from the substitution of La-Nb increased the dielectrical constant, the piezoelectric charge constant, the dielectric loss and decreased the coercive field. 4. The resistivity of PZT system which has the P type conduction mechanism increased according to substitution of La-Nb because of the substituent acting as donor. 5. The PZT ceramics varied from ferroelectric substance according to increase of Ca-La-Nb substituent. The coercive field and saturation remanent polarization decreased, and at last straight line according to increase of La-Nb substitution. 6. The amount of Ca-La-Nb substitution to improve the light transmittance of speciment was 10 mol%, the Zr/Ti ratio was 49/51, and the second stage sintering time was 40 hours. 7. According to Ca-La-Nb substitution, the specimens was to be transparent. The 7.5/51/49 specimen was suitable for transparent sound vibrator because it had 58% light transmittance (thick 0.2[mm], wave length 700[mm]) and 48% electromechanical coupling factor.

• Transactions on Electrical and Electronic Materials
• /
• 제13권6호
• /
• pp.283-286
• /
• 2012

(1-X)$(Na_{0.5}K_{0.5})NbO_3-XK_{5.4}Cu_{1.3}Ta_{10}O_{29}$ (NKN-KCT) lead-free piezoelectric ceramics have been synthesized by the conventional solid state sintering method, and their sinterability and piezoelectric properties were investigated. Typically, this material is sintered between 1,025 and $1,100^{\circ}C$ for 2 hours to achieve the required densification. Crystalline structures and Microstructures were analyzed by X-ray diffraction and scanning electron microscope. The density, dielectric constant (${\varepsilon}_r$), piezoelectric constant $d_{33}$, electromechanical coupling factor $k_p$ and mechanical quality factor $Q_m$ value of the NKN ceramics depended upon the KCT content and the sintering temperature. In particular, the KCT addition to NKN greatly improved the mechanical quality factor $Q_m$ value. The ceramic with X = 1.0 mol% sintered at $1,050^{\circ}C$ exhibited optimum properties (${\varepsilon}_r$=246, $d_{33}$=95, $k_p$=0.38 and $Q_m$=1,826). These results indicate that the ceramic is a promising candidate material for applications in lead free piezoelectric transformer and filter materials.

• 한국자기학회지
• /
• 제22권6호
• /
• pp.221-227
• /
• 2012

고특성 영구자석은 하이브리드 및 전기자동차의 구동모터와 풍력발전에 적용되면서 크게 주목을 받고 있다. Nd-Fe-B 영구자석은 가장 높은 최대자기에너지적을 가지고 있지만 고온(${\sim}200^{\circ}C$)의 구동환경에서는 보자력이 급격히 감소하기 때문에 사용할 수 없는 단점을 가지고 있다. 그러므로 큰 보자력을 가지는 Nd-Fe-B 영구자석에 대한 개발이 요구되고 있다. Nd-Fe-B 소결자석에서 보자력을 증가시키기 위해서는 Nd를 Dy 또는 Tb으로 치환하면 쉽게 증가시킬 수 있다. 그러나 이들 원소는 Fe와 반강자성 결합을 하여 잔류자속밀도를 낮추고, 적은 매장량과 한정된 지역에 편재되어 있어 수요급증에 따른 자원수급 및 가격 급등의 문제를 가지고 있다. 따라서, Dy 및 Tb과 같은 중희토류를 사용하지 않거나 최소한의 양을 사용하여 보자력을 증가시키고자 하는 연구가 많이 진행되고 있다. 본 논문에서는 이러한 중희토류 원소의 저감 및 대체에 대한 연구들을 소개하고자 한다.

• 한국결정성장학회지
• /
• 제15권3호
• /
• pp.108-113
• /
• 2005

부드럽지만 큰 변위를 발생시키는 생체모방 액츄에이터는 관심의 대상이 되어왔다. 특히, 듀폰사의 나피온 고분자는 작은 전기장하에서도 큰 변위를 나타내었다. 전기기계적 특성을 향상시키기 위하여 탄소나노튜브/고분자 나노복합체를 제조하였다. 다중 탄소나노튜브/나피온 나노복합체를 캐스팅법으로 제조하고 탄소나노튜브 첨가량에$(0{\sim}7wt%)$ 따른 나노복합체의 전기기계적 특성을 조사하였다. 탄소나노튜브가 첨가된 나노복합체는 탄소나노튜브가 없는 고분자 액츄에이터와 비교하여 우수한 탄성계수와 응력이 관찰되었다. 다중 탄소나노튜브의 첨가는 고기능성 생체모방 액츄에이터 특성을 증진시키는데 효과적이었다.

• 대한기계학회논문집A
• /
• 제34권3호
• /
• pp.283-289
• /
• 2010

친환경기술과 신재생 에너지 자원에 대한 세계적인 관심이 증가하면서, 플라이휠 에너지 저장 장치는 화학전지나 연료전지와 같은 기존의 에너지 저장 시스템의 대안 중 하나로 부상하고 있다. 플라이휠 에너지 저장장치의 에너지 저장 용량은 극질량 관성모멘트와 회전속도의 제곱에 비례하기 때문에, 가능한 높은 회전속도와 높은 극질량 관성모멘트를 갖도록 설계하는 것이 중요하다. 하지만, 시스템의 운전안정성 확보가 최적설계의 구속조건으로 작용할 수 있다. 본 논문에서는 에너지 저장 용량을 최대화하고 운전안정성 및 외란에 대한 강인성을 확보하는 플라이휠 시스템의 최적설계를 제안한다. 그리고, 기존의 PD 제어에 비교하여 교차궤환제어법이 자이로스코프효과를 줄이고, 에너지 저장밀도를 높이는데 필수적임을 확인하였다.

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.215-221
• /
• 2016

We conducted a phased electromagnetic forming process analysis (EFPA) over time through a coupling of electromagnetic analysis and structural analysis. The analysis is conducted through a direct linkage between electromagnetic analysis and structural analysis. The analysis process is repeated until the electric current is completely discharged by a formed coil. We calculate the forming force that affects the workpiece using MAXWELL, a commercial electromagnetic finite element analysis program. Then, we simulate plastic behavior by using the calculated forming force data as the forming force input to ANSYS, a commercial structure finite element analysis program. We calculate the forming force data by using the model shape in MAXWELL, a commercial electromagnetic finite element analysis program. We repeat the process until the current is fully discharged by the formed coil. Our results can be used to reduce the error in data transformation with a reduced number of data transformations, because the proposed approach directly links the electromagnetic analysis and the structural analysis after removing the step of the numerical analysis of a graph describing the forming force, unlike the existing electromagnetic forming process. Second, it is possible to simulate a more realistic forming force by keeping a certain distance between nodes using the re-mesh function during the repeated analysis until the current is completely discharged by the formed coil, based on the MAXWELL results. We compare and review the results of the EFPA using the peak value of the forming force that acts on the workpiece (which is the existing analysis method), and the proposed phased EFPA over time approach.

• International Journal of Automotive Technology
• /
• 제7권1호
• /
• pp.1-7
• /
• 2006

The ignition delay of a dual fuel system has been numerically investigated by adopting a constant volume chamber as a model problem simulating diesel engine relevant conditions. A detailed chemical kinetic mechanism, consisting of 28 species and 135 elementary reactions, of dimethyl ether (DME) with methane ($CH_{4}$) sub-mechanism has been used in conjunction with the multi-dimensional reactive flow KIVA-3V code to simulate the autoignition process. The start of ignition was defined as the moment when the maximum temperature in the combustion vessel reached to 1900 K with which a best agreement with existing experiment was achieved. Ignition delays of liquid DME injected into air at various high pressures and temperatures compared well with the existing experimental results in a combustion bomb. When a small quantity of liquid DME was injected into premixtures of $CH_{4}$/air, the ignition delay times of the dual fuel system are longer than that observed with DME only, especially at higher initial temperatures. The variation in the ignition delay between DME only and dual fuel case tend to be constant for lower initial temperatures. It was also found that the predicted values of the ignition delay in dual fuel operation are dependent on the concentration of the gaseous $CH_{4}$ in the chamber charge and less dependent on the injected mass of DME. Temperature and equivalence ratio contours of the combustion process showed that the ignition commonly starts in the boundary at which near stoichiometric mixtures could exists. Parametric studies are also conducted to show the effect of additive such as hydrogen peroxide in the ignition delay. Apart from accurate predictions of ignition delay, the coupling between multi-dimensional flow and multi-step chemistry is essential to reveal detailed features of the ignition process.