• 한국지반공학회논문집
• /
• 제18권4호
• /
• pp.55-64
• /
• 2002

본 논문에서는 점탄-점소성 구성모델을 다층지반에서의 대형지진 발생시의 조건에 적용하기 위해 일본 고베 포트아일랜드에서 발생한 1995 Hyogoken Nanbu 지진에 대한 지진응답 해석을 수행하였다. 지진응답해석 결과 점성토의탄-점소성 모델과 점탄-점소성 모델로 계산된 가속도 기록은 포트아일랜드에서 계측된 가속도 기록과 거의 일치함을 알 수 있었으며, 점성토 지반 부근에서 점탄-점소성 모델과 탄-점소성 모델은 미세하게 다른 거동 특성을 나타내어 점소성 모델의 타당성을 확인하였다. 따라서 동적 점탄-점소성 구성모델은 대변형률 영역에서 점성토의 소성변형을 유발하는 대형 지진 등의 발생시 점성토의 증폭 및 감쇠특성의 파악을 위해 적용가능한 모델임이 입증되었다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.89-94
• /
• 1996

The use of shield is increasing day by day, because it's method is advantageous tunneling method to soft and collapsible ground. In case of analyzing shield tunnel by FEM, short term behavior of ground by initial heaving and tail void closure and long terms of it because of consolidation by changes of pore pressures in clay must be considered. In this paper, the shield tunneling construction stages was analyzed from 2 dimensional elasto - viscoplastic finite element program used Mohr - Coulomb yield criterion but not considered the changes of pore pressures. The object of investigation was N - 2 Tunnel. Since the good results of analysis compared to the measured behavior of ground for heaving, tail void closure and liner installation, this results can be applied to design and construction of shield tunneling for the subways, sewage lines etc.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.396-399
• /
• 2001

Development of adiabatic shear bands in thermoviscoplastic materials is analyzed via high resolution scheme. Presented here are our initial results, which are for one dimensional elasto-viscoplastic materials. As the mesh-sizes are getting small, the convergence result of plastic strain rate is obtained using elasto-viscoplastic materials. The further study cases will be reported at the presentation in the framework of the one and the two dimensional shearbanding, respectively. They will be compared with finite element solutions, and the advantage of the scheme will be discussed.

• 한국농공학회지
• /
• 제34권2호
• /
• pp.60-72
• /
• 1992

This study aims at predicting the behavior of saturated soft clayey foundation subjected to earth structure loads such as tidal dike, embankment etc. by using Biot's consolidation equation coupled with elasto-viscoplastic constitutive model. To validate the computer program developed b author, a case study was performed for the site of Kwang-yang steel works improved by sand drain, where since the beginning of the works, field measurements(settlement, lateral displacement and excess pore water pressure) had been accurately achieved. Comparisons between numerical results and observation values were carried out. The main results obtained are summarized as follows : 1. Settlement and lateral displacement between numerical and observation values show satisfactory accordance. 2. As for the exess pre water pressure, numerical results appear to be larger than observation values, which may be due to the existence of sand seams which were not found during soil investigation. 3. Useful data available for failure prediction of soft foundation can be secured by examining lateral displacement, settlement, exess pore water pressure and stress paths.

• 한국CDE학회논문집
• /
• 제2권2호
• /
• pp.71-76
• /
• 1997

The deformations of polycrystalline materials are modelled by linking a constitutive equation for the crystallographic slip of a single crystal to the macroscopic behavior of the aggregate. In this study, anisotropic elasticity (lattice stretching) of a cubic crystal is incoporated into the anisotropic plasticity from crystallographic slip. The constitutive description for the aggregate, derived from a crystal plasticity theory, is used to formulate a Consistent Penalty Finite Element Method for the anisotropic elasto-viscoplastic deformation of polycrystalline materials. As an application, a plane-strain forging process is simulated and the effects of the initial textures on the deformation behavior of the workpiece are examined.

• 전산구조공학
• /
• 제2권2호
• /
• pp.53-62
• /
• 1989

최근에 원유와 석유제품을 저장하기 위한 지하공동의 필요성이 급증하고 있다. 지하저장공동의 동적응답을 구하기 위하여 재료비선형(탄.점소성)과 기하학적 비선형 효과를 모두 고려한 프로그램 VISDYN을 작성하여 그 유효성을 확인하였다. 프로그램 VISDIN을 이용하여 지하저장 공동의 탄.점소성 동적해석을 수행한 결과 공동을 굴착한 후 지반이 안정상태에 도달한 때의 변위와 굴착 직후의 변위는, 동적인 변위 응답에서는 차이가 거의 없음을 알 수 있었다.

• 한국지반공학회논문집
• /
• 제15권6호
• /
• pp.17-28
• /
• 1999

본 연구에서는 자연점토의 압밀에 대한 변형률속도의 영향을 해석하기 위하여 비선형 점탄소성 모델을 제안하였다. 연약지반의 점소성 거동은 유일한 유효응력-변형률-변형률속도 (equation omitted)의 관계식으로부터 구할 수 있다. Berthierville 점토에 대한 크리프실험, 다단계 하중실험, Relaxation실험과 같은 실내실험결과와 수치해석결과를 비교하였다. 제안된 점탄소성 모델을 사용하여 자연점토의 압밀거동을 비교적 정확히 예측할 수 있다.

• 한국전산구조공학회논문집
• /
• 제22권2호
• /
• pp.153-161
• /
• 2009

재료 비선형성을 갖는 열탄점소성 손상 문제와 경계 비선형성을 갖는 접촉 문제의 효율적인 해석을 위하여 열탄성 부영역, 열탄점소성/손상 부영역, 공유면, 접촉 공유면에 기반을 둔 영역/경계 분할법을 제안하였다. 대변형과 같은 지하학적 비선형성은 고려하지 않았으며, 영역 및 경계 분할에 관련된 공유면 및 접촉 공유면에서의 연속 구속 조건을 처리하기 위하여 간단한 벌칙 함수 기법을 적용하였다. 결과적으로 재료 및 경계 비선형성은 소수의 부영역과 접촉 경계면에서 계산되는 유한요소 행렬들에 국한된다. 따라서 적절한 해석 알고리듬을 구성하면 대폭적인 효율성 향상이 가능하게 된다. 간단한 수치 실험을 통해서 열탄점소성 손상 및 접촉 해석의 효율성에 관련된 기본적인 특성을 분석하였다.

• 한국농공학회지
• /
• 제39권3호
• /
• pp.72-82
• /
• 1997

In all inelastic deformations time rate effects are always present to some degree. Whether or not their exclusion has a significant influence on the prediction of the material behaviour depends upon several factors. In the study of structural components under static loading conditions at normal temperature it is accepted that time rate effects are generally not important. However metals, especially under high temperatures, exhibit simultaneously the phenomena of creep and viscoplasticity. In this study, elastoplastic and elasto-viscoplastic models include nonlinear geometrical effects were developed and several numerical examples are also included to verify the computer programming work developed here in this work. Comparisons of the calculated results, for the elasto-viscoplastic analysis of an internally pressurised thick cylinder under plane strain condition, have shown that the model yields excellent results. The results obtained from the numerical examples for an elasto-viscoplastic analysis of the Nuclear Reinforced Concrete Containment Structure(NRCCS) subjected to an incrementally applied internal pressure were summarized as follows : 1. The steady state hoop stress distribution along the shell layer of dome and dome wall junction part of NRCCS were linearly behave and the stress in interior surfaces was larger than that in exterior. 2.However in the upper part of the wall of NRCCS the steady state hoop stress in creased linearly from its inner to outer surfaces, being the exact reverse to the previous case of dome/dome-wall junction part. 3.At the lower part of wall of NRCCS, the linear change of steady state hoop stress along its wall layer began to disturb above a certain level of load increase.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1991년도 추계학술발표회 논문집 지반공학에서의 컴퓨터 활용 COMPUTER UTILIZATION IN GEOTECHNICAL ENGINEERING
• /
• pp.362-375
• /
• 1991

Background and Necessity of the study : For more than 20 years, the soil engineering reserach group of Chonnam National University has been performing the deformation analysis of soft clayey foundation, since the University is located near the south-western coast of Korean Peninsulla, along which tide reclamation works have been under proaressing. Associsted with the fact mentioned above, the researchers have been developing a computer program in order to carry out deformation analysis of soft foundation since early 1980. Case-studies : In this research, the Biot's equation was selected as the governing equation coupled with several constitutive models including original and modified Cam-clay models, elasto-viscoplastic model, Lade's model etc. The anisotropy of soi1 can be considered in this program. To validate the accuracy of the computer program developed a couple of case-studies were performed. These include the pilot banking, sand drain considering smear effect and compound foundation reinforced with sheet pile into soft foundation.i) The pilot banking Good results could be acquired by assuming banking load as the body force composed of finite element mesh rather than equivalent concentrated load.ii) The sand drain Due to smear, the delay of consolidation was remarkable at the early stsge. so safety for the failure of foundation should be checked for the initial step of consolidation. iii) The compound foundation Accurate results were obtained by introducing the joint element method for the soft foundation reinforced with sheet pile into soiㅣ.