• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.51-59
• /
• 1998

The purposes of the paper are to consider the failure phenomenon based on delamination and crack when the encapsulant of plastic IC package under hygrothermal loading in the IR soldering process is on elastic and viscoelastic behavior due to the temperature and to show the optimum design using fracture mechanics. The model for analysis is the plastic SOJ package with a dimpled diepad. The package model with the perfect delamination between chip and diepad is chosen to estimate the resistance to fracture by calculating J-integrals in low temperature and C(t)-integrals in high temperature with the change of the design under hygrothermal loading. The optimum design to depress the delamination and crack in the plastic IC package is presented.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 가을 학술발표회 논문집
• /
• pp.65-67
• /
• 1991

A numerical analysis in linear-elastic state for prestressed concrete tanks including the time-dependent effects due to creep and shrinkage of concrete, relaxation of prestressing cable have been studied by many researchers. In this paper, not only the time dependent factor but also the nonlinear elasto-plastic behavior are considered. Prestresses are considerde in vertical and circumferential direction.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2002년도 춘계학술강연 및 발표대회
• /
• pp.11-11
• /
• 2002

Plastic deformation was observed by TEM around the intragranular SiC particles in the $Al_2O_3$ matrix for $Al_2O_3/SiC$ nanocomposite system. The dislocations are generated at selected planes and there is a tendency for the dislocations to form a subgrain boundary structure with low-angel grain boundaries and networks. In this study, dislocation generated in the $Al_2O_3$ matrix during cooling down from sintering temperatures by the highly localized thermal stresses within and/or around SiC particles caused from the thermal expansion mismatch between $Al_2O_3$ matrix and SiC particle was observed. In monolithic $Al_2O_3$ and $Al_2O_3/SiC$ microcomposite system. These phenomena is closely related to the plastic relaxation of the elastic stress and strain energy associated with both thermal misfitting inclusions and creep behaviors. The plastic relaxation behavior was explained by combination of yield stress and internal stress.

• 한국지반공학회지:지반
• /
• 제14권5호
• /
• pp.129-142
• /
• 1998

본 연구에서는 파괴강도이내의 일정하중 상태에서 장기적으로 진행되는 연약지반의 침하특성을 파악하기 위하여 Creep 변형성분을 고려한 구성방정식을 유도하고, 유한요소해석 프로그램을 개발하여 이를 바탕으로 토공구조물의 장기적인 변형을 합리적으로 예측함으로서 연약지반상 토공구조 물의 설계 및 시공관리에 기여하고자 하였다. 점성토의 탄.소성거동을 표현하기 위해 Modified Cam Clay모델이 사용되었으며, Creep변형을 계산하는데 있어서는 체적 Creep요소를 고려할 경우 2차 압밀계수 C,를 적용하였고, 축차 Creep요소를 고려할 경우 Singh & Mitchel Creep경험식을 통한 m, a, A 상수를 이용한 것으로 개발된 프로그램의 신뢰성을 검증하기 위하여 이론해 및 실험치와 비교하였고, 적용된 각 상수들의 민감도 를 분석한 결과, 개발된 프로그램은 적용성이 좋은 것으로 판단되었다. 또한 국내외 2개의 현장에 적용한 결과, 제방의 변형해석에 있어 Creep을 고려하지 않은 경우보다 Creep을 고려한 경우가 오차가 적게 나타나고 체적 Creep만을 고려한 경우는 약간 과소평가되 고 축차 Creep까지 고려한 경우는 약간 과대평가됨을 알 수 있었다. 따라서 Creep정수를 얻기 위한 실험기의 개발, 적정 토질정수의 선택 등 향후에도 지속적인 연구가 요구된다.

• 한국안전학회지
• /
• 제15권2호
• /
• pp.8-12
• /
• 2000

The fatigue crack propagation tests were performed in triangular and holding-time stress waveforms at $650^{\circ}C$. The behavior of fatigue crack propagation was investigated according to waveform. The analysis of high temperature fatigue crack propagation by the stress intensity factor range ${\Delta}K$, elastic fracture mechanics parameter, was not available. The behaviors of high temperature fatigue crack propagation by the J-integral(${\Delta}J_f$, J' and ${\Delta}J_c$), elasto-plastic fracture mechanics parameter, were investigated in a number of stress waveforms. The fast-fast waveform exhibited cycle-dependent(fatigue type), the slow-fast and the hold time with 500sec waveforms appear to be time-dependent(creep type) and the fast-slow and the hold time with 5, 25sec waveforms exhibited conbined behavior of both types(fatigue-creep conbined type).

• 대한기계학회논문집A
• /
• 제32권10호
• /
• pp.805-816
• /
• 2008

The present work reviews the methods to evaluate elastic-plastic material characteristics by indentation tests. Especially the representative stress and strain values used in some papers are critically analyzed. The values should not only represent the load-depth curve, but also represent the whole of deformed material around the impression. We briefly introduce other indentation techniques to evaluate residual stresses, creep properties, and fracture toughness. We also review some technical problems that are related to the accuracy issues in indentation tests.

• Journal of Welding and Joining
• /
• 제18권2호
• /
• pp.227-227
• /
• 2000

Pressure vessels usually consist of main body and pipes which are connected with the main body. And as joining method of such main body and pipes, welding is carried out. After welding, welding residual stresses inevitably occur around welded joints. As residual stresses act harmfully on fatigue strength, corrosion and buckling strength of structure, PWHT is carried out for the purpose of removing the residual stress. But, during PWHT process, 2 ¼Cr-1Mo steels are frequently apt to generate reheat crack. For this reason, it is strongly needed to analyze and examine the mechanical behavior of welded joints before and after PWHT process. So, in this study, welded nozzle parts of pressure vessel where reheat cracks frequently occur are selected for examining the mechanism of crack-occurrence. (Received December 2, 1999)

• Journal of Welding and Joining
• /
• 제18권2호
• /
• pp.100-104
• /
• 2000

Pressure vessels usually consist of main body and pipes which are connected with the main body. And as joining method of such main body and pipes, welding is carried out. After welding, welding residual stresses inevitably occur around welded joints. As residual stresses act harmfully on fatigue strength, corrosion and buckling strength of structure, PWHT is carried out for the purpose of removing the residual stress. But, during PWHT process, $2\frac{1}{4}Cr-1Mo$ steels are frequently apt to generate reheat crack. For this reason, it is strongly needed to analyze and examine the mechanical behavior of welded joints before and after PWHT process. So, in this study, welded nozzle parts of pressure vessel where reheat cracks frequently occur are selected for examining the mechanism of crack-occurrence.

• Geomechanics and Engineering
• /
• 제29권1호
• /
• pp.41-51
• /
• 2022

Tunneling in rocks having the time-dependent behavior, causes some difficulties like tunnel convergence and, as a result, pressure on concrete lining; and so instability on this structure. In this paper the time-dependent behaviour of squeezing phenomenon in a large cross section tunnel was investigated as a case study: Alborz tunnel. Then, time-dependent behaviour of Alborz tunnel was evaluated using FLAC2D based on the finite difference numerical method. A Burger-creep viscoelastic model was used in numerical analysis. Using numerical analysis, the long-time effect of squeezing on lining stability was simulated.This study is done for primary lining (for 2 years) and permanent lining (for 100 years), under squeezing situations. The response of lining is discussed base on Thrust Force-Bending Moment and Thrust Force-Shear Force diagrams analysing. The results determined the importance of consideration of time-dependent behaviour of tunnel that structural forces in concrete lining will grow in consider with time pass and after 70 years can cause instability in creepy rock masses section of tunnel. To show the importance of time-dependent behavior consideration of rocks, elastic and Mohr-Coulomb models are evaluated at the end.

• 콘크리트학회지
• /
• 제5권2호
• /
• pp.181-188
• /
• 1993

본 논문에서는 철근콘크리트 쉘 구조물의 크리프와 건조수축에 의한 시간의존성 효과를 포함하여 해석할 수 있는 기법을 개발하였다. Degenerate 쉘 요소를 해석에 사용하였으며 층 분할 기법을 이용하였다. 콘크리트의 압축 거동 모델은 탄-소성 모델 혹은 변형율 경화 모델을 사용할 수 있도록 하였고, 인장 영역에서는 균열 발생시 까지 선형 탄성으로 가정하였다. 철근은 등가의 두께를 가지는 철근 층으로 근사되었으며 각 철근 층은 철근의 배치 방향으로만 저항하는 일축거동을 하며 응력-변형율 곡선을 두 개의 직선으로 이상화 하였다. 비선형 해석을 위해 하중 증분 기법과 반복계산 기법을 사용하였으며 시간 의존성 효과를 고려하기 위해 시간영역을 같은 간격이 아닐 수도 있는 여러 개의 구간으로 나누어 해석하였다. 몇 개의 계산 예를 제시하고 다른 연구자들의 결과와 비교하여 본 연구의 타당성을 검토하였다.