• 대한기계학회논문집A
• /
• 제35권6호
• /
• pp.609-617
• /
• 2011

최근 효율을 높이기 위한 플랜드의 환경이 고온, 고압으로 변화함에 따라 열하중과 기계하중을 동시에 반영한 균열 평가는 플랜트의 건전성을 위하여 반드시 필요하다. C(t)-적분은 고온 균열 평가에 있어서 천이 크리프 상태의 균열을 평가하는 중요한 요소이다. 열하중과 기계하중이 동시에 작용하는 환경에서의 C(t)-적분을 예측하는 것은 복잡하며 하중조건이 달라지는 경우에는 더욱더 복잡해진다. 본 논문에서는 열하중과 기계하중의 하중조건이 달라지는 여러 조건에 대한 C(t)-적분 평가식을 제시하였다.

• Structural Engineering and Mechanics
• /
• 제30권6호
• /
• pp.665-678
• /
• 2008

The beams components subjected to the loading such as axial, bending and cyclic thermal loads were studied in this research. The used constitutive equations are those of elasto-plasticity coupled to ductile and/or creep damage. The nonlinear kinematic hardening behavior was considered in elastoplasticity modeling. The unified damage law proposed for ductile failure and fatigue by the author of Sermage et al. (2000) and Kachanov's creep damage model applied to cyclic creep and low cycle fatigue of beams. Based on the results of the analysis, the shakedown limit loads were determined through the calculation of the residual strains developed in the beam analysis. The iterative technique determines the shakedown limit load in an iterative manner by performing a series of full coupled elastic-plastic and continuum damage cyclic loading modeling. The maximum load carrying capacity of the beam can withstand, were determined and imposed on the Bree's interaction diagram. Comparison between the shakedown diagrams generated by or without creep and/or ductile damage for the loading patterns was presented.

• Structural Engineering and Mechanics
• /
• 제27권6호
• /
• pp.639-650
• /
• 2007

Applying the method calculating creep of Concrete Filled steel Tube (CFT) members based on the Elastic Continuation and Plastic Flow theory for concrete creep with the finite element method, the paper develops a new numerical method for the creep of CFT arch bridges considering effects of bending moment. It is shown that the method is feasible and reasonable through comparing the predicted stresses and deflection caused by the creep with the results obtained by the method of Gu et al. (2001) based on ACI209R model and experimental data of an actual CFT arch bridge. Furthermore, nine CFT arch bridges with different types are calculated and analyzed with and without the effects of bending moment. As a result, the bending moment has considerable influences on long-term deformations and internal forces of CFT arch bridges, especially when the section of arch rib is subjected to a large bending moment.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2000년도 특별강연 및 춘계학술발표대회 개요집
• /
• pp.264-266
• /
• 2000

In this study, analysis of creep-fatigue behavior of low alloy steel weld was performed. An interface was employed along the crack plane to simulate the interface between base metal and weld metal. A trapezoidal waveshapes was loaded cyclically and analysis result was compared with that of monotonic load. The material was assumed as elastic-plastic-secondary creeping material. Because the isotropic hardening plasticity model used in the last study cannot simulate the behavior of material under cyclic load, the linear kinematic hardening plasticity model was used. The behavior of strain field and $C_{t}$ parameter was obtained.d.

• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.43-50
• /
• 1998

The purpose of the paper is to protect the damage of plastic IC package with searching the cause of the fracture due to the delamination and crack when the encapsulant of plastic IC package is on viscoelastic behavior with the effect of creep on high temperature, The model for analysis is the plastic SOJ package with dimpled diepad in the IR soldering process of surface mounting technology. The risk of delamination with calculating the distribution of viscoelastic thermal stress in the package without the crack in the surface mounting process is checked. The package model with the perfect delamination between chip and diepad is chosen to estimate the resistance against fracture in thermal loading with calculating C (t)-integrals according to the change of the design. The optimum design to depress the delamination and crack is presented.

• 대한토목학회논문집
• /
• 제1권1호
• /
• pp.53-68
• /
• 1981

지속하중하(持續荷重下)의 점토지반(粘土地盤) 또는 사면(斜面)을 형성(形成)하고 있는 점토(粘土)는 시간의존변형(時間依存變形)을 일으키고 어떤 경우 파괴(破壞)에 이르기도 하는데 그 원인(原因)은 점토(粘土)의 Creep 거동(擧動) 때문이라는 보고(報告)가 대부분(大部分)이다. Creep 거동(擧動)은 많은 요소(要素)에 관련될 뿐 아니라 특(特)히 함수비(含水比) 및 응력수준(應力水準)에 큰 영향(影響)을 받기 때문에 매우 복잡(複雜)하며 따라서 그 거동(擧動)을 해석(解析) 하기도 어려운 일인데 Creep이 궁극적(窮極的)으로는 점토(粘土) 입자간(粒子間)의 미시적(微視的)인 거동(擧動)에서 비롯되기 때문이다. 응력(應力)-변형(變形)-시간(時間) 관계(關係)로서의 Creep 거동(擧動)을 수학적(數學的)으로 표현(表現)하기 위하여 여러 형태(形態)의 유변학적(流變學的) 모델이 제안(提案) 되었다. 유변학적(流變學的) 모델은 선형(線形) 스프링, 비선형(非線形) Dashpot 및 Slider를 조합(組合)한 것인데 점토(粘土)의 변형(變形)에 관한 탄성적(彈性的), 소성적(塑性的) 및 점성적(粘性的) 성분(成分)을 구분(區分) 하는데 매우 유용(有用)하다. 그러나 대부분(大部分)의 경우, 유변학적(流變學的)모델은 포화(飽和)된 점토(粘土)에 대(對)하여 주(主)로 2차압밀(次壓密) 거동(擧動)을 밝히기 위하여 제안(提案)된 것으로 비포화점토(非飽和粘土)에 대(對)한 보고(報告)는 매우 드문 것 같다. 한편, Creep 거동(擧動)은 시간의존변형(時間依存變形)이므로 흐트러진 점토(粘土)를 다져서 시험(試驗)하는 경우, 시간경과(時間經過)에 따라 Thixotropy 문제(問題)가 제기(提起)될 것이고 배수조건(排水條件)과 관련하여서는 공시체(供試體)의 높이가 문제(問題)될 수 있다. 그뿐 아니라 많은 연구결과(硏究結果)에 의(依)하면 응력증가초기(應力增加初期)에는 시간지체(時間遲滯)가 없는 초기탄성변형(初期彈性變形)이 발생(發生)된다고 하므로 유변학적(流變學的) 모델에는 이를 나타내는 요소(要素)가 반드시 필요(必要)하게 될 것이다. 본(本) 연구(硏究)는 이러한 면(面)에 초점(焦點)을 두고 함수비(含水比)와 응력수준(應力水準)을 여러 가지로 변화(變化)시켰을 때의 Creep 거동(擧動)을 유변학적(流變學的) 모델로 해석(解析)함에 있어 소성(塑性)이 비교적(比較的) 큰 3종(種)의 점토(粘土)를 사용(使用)하여 초기탄성변형(初期彈性變形) 거동(擧動)을 밝히고 Thixotropy 효과(効果) 및 공시체(供試體)의 높이가 Creep 거동(擧動)에 끼치는 영향(影響)을 구명(究明)하며 아울러 유변학적(流變學的) 모델의 어떤 요소(要素)에 관련 되는가를 알아내기 위하여 다져서 성형(成形)한 공시체(供試體)로서 일축배수형식(一軸排水形式)의 Creep 거동(擧動)을 시행(施行)하였다. 실험결과(實驗結果) 및 검토(檢討)에 의(依)하면 응력재하(應力載荷) 및 증가초기(增加初期)에는 시간지체(時間遲滯)가 없는 탄성적(彈性的) 초기변형(初期變形)이 발생(發生)하고 따라서 유변학적(流變學的) 모델에는 이를 나타내기 위한 상부(上部)스프링을 설치(設置)해야 하며 Thixotropy 효과(効果)를 고려(考慮)한 경우, Creep변형(變形)은 완만(緩慢)하게 되나 함수비(含水比) 및 응력수준(應力水準)에 따른 상태거동(狀態擧動)은 같으므로 그 차이(差異)는 모델 상수(常數)의 크기에만 관련됨을 알아내었고 따라서 동일(同一)한 유변학적(流變學的) 모델로 그 거동(擧動)을 나타낼 수 있다는 사실(事實)을 밝혀 냈다. 또 공시체(供試體) 높이를 작게 한 경우에는 함수비(含水比)가 비교적(比較的) 작아서 점(粘)-소(塑)-탄성(彈性) 및 점(粘)-탄성(彈性)일 때만 높이가 클 때와 같은 상태거동(狀態擧動)을 나타내어 동일(同一)한 유변학적(流變學的) 모델로 나타낼 수 있고 함수비(含水比)가 큰 점일소성(粘一塑性) 및 점성류(粘性流)일 때는 그 상태거동(狀態擧動)이 배수문제(排水問題)와 관련하여 달라지게 되고 따라서 유변학적(流變學的) 모델도 달라지게 된다는 사실(事實)을 발견(發見) 하였다.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.890-897
• /
• 2003

This paper compares engineering estimation schemes of C＊ and creep COD for circumferential and axial through-wall cracked pipes at elevated temperatures with detailed 3-D elastic-creep finite element results. Engineering estimation schemes included the GE/EPRI method, the reference stress method where reference stress is defined based on the plastic limit load and the enhanced reference stress method where the reference stress is defined based on the optimized reference load. Systematic investigations are made not only on the effect of creep-deformation behaviour on C＊ and creep COD, but also on effects of the crack location, the pipe geometry, the crack length and the loading mode. Comparison of the FE results with engineering estimations provides that for idealized power law creep, estimated C＊ and COD rate results from the GE/EPRI method agree best with FE results. For general creep-deformation laws where either primary or tertiary creep is important and thus the GE/EPRI method is hard to apply, on the other hand, the enhanced reference stress method provides more accurate and robust estimations for C* and COD rate than the reference stress method.

• Nuclear Engineering and Technology
• /
• 제55권1호
• /
• pp.80-99
• /
• 2023

This paper presents the results of investigating the change in welding residual stresses of the core shroud, which is one of subcomponents in reactor vessel internals, performing finite element analysis. First, the welding residual stresses of the core shroud were calculated by applying the heat conduction based lumped pass technique and finite element elastic-plastic stress analysis. Second, the temperature distribution of the core shroud during the normal operation was calculated by performing finite element temperature analysis considering gamma heating. Third, through the finite element viscoelastic-plastic stress analysis using the calculated temperature distribution and setting the calculated residual stresses as the initial stress state, the variation of the welding residual stresses was derived according to repeating the normal operation. In the viscoelastic-plastic stress analysis, the effects of neutron irradiation on mechanical properties during the cyclic normal operations were considered by using the previously developed user subroutines for the irradiation agings such as irradiation hardening/embrittlement, irradiation-induced creep, and void swelling. Finally, the effect of neutron irradiation on the welding residual stresses was analysed for each irradiation aging. As a result, it is found that as the normal operation is repeated, the welding residual stresses decrease and show insignificant magnitudes after the 10^th refueling cycle. In addition, the irradiation-induced creep/void swelling has significant mitigation effect on the residual stresses whereas the irradiation hardening/embrittlement has no effect on those.

• 한국산학기술학회논문지
• /
• 제7권3호
• /
• pp.409-413
• /
• 2006

미시학적 비배수 크리프 현상의 누적 변형은 점성토 시공지역 지반의 전반 파괴를 야기 할 수 있다. 본 연구에서는 점성토의 비배수 크리프 거동을 예측하기 위하여 Perzyna의 일반 점성이론을 소성론의 개념에서 간략화하고 수정 Cam clay 모델 및 데미지 이론을 포함하는 하나의 시간의존적 구성방정식을 유도하였다. 유도된 구성방정식을 활용하여 예측한 크리프 거동은 비배수 크리프 파괴를 포함하는 크리프 실험결과와 잘 부합하였다.

• 한국건축시공학회지
• /
• 제1권1호
• /
• pp.151-159
• /
• 2001

This study was performed to investigate the effect of time-dependent creep on the deformation. In the analysis, modified Cam-Clay model was adopted to describe the elastic-plastic behavior of clayey soil. In order to consider effect of creep, the secondary coefficient of consolidation $\alpha$ was supplemented to modified Cam-Clay model. To examine the reliability of the program which is developed in this study, the estimated values by this program were compared with the experimental results. The results of the analysis were in good agreement with the observed values in the field.