• 대한기계학회논문집B
• /
• 제25권10호
• /
• pp.1327-1336
• /
• 2001

The structural modes driven by the low wave-number components of smooth elastic wall pressure provide a relatively weak coupling between the flow and the wall motion. If the elastic thin plate has any resonant mode whose wave-number of resonance coincides with $\omega$/U$\sub$c/, the power will be transmitted to those modes of vibration by the flows. We examine the problem in which the elastic thin plate is subject to pressure fluctuations under turbulent boundary layer. Measurements are presented of the frequency spectra of the near- and far-field pressures and radiated sound contributed by the various wave modes of the thin elastic plate. Dispersion equation for wave motions of elastic plate is used to investigate the effect of bending waves of relatively low wave number on radiated sound. The low wave-number motion of elastic plate is observed to have much less influence on the low-frequency energy of wall pressure fluctuations than that of the rediated sound. High amplitude events of the wall pressure are observed to weakly couple with high-frequency energy of radiated sound for case of low tension applied to the plate. The sound source localization is applied to the measurement of radiated sound by using acoustic mirror system.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.198-207
• /
• 2010

Many methods and techniques have been developed to obtain the accurate design parameters in soft soils. In particular, several researchers suggest the techniques to get the void ratio for understanding the soil behavior. The objective of this paper verifies the accuracy of the proposed analytical solution for determining the void ratio based on the elastic wave velocities. The paper covers the theories of Wood, Biot, Gassmann and Foti proposed chronological order. The total theory represents the wave propagation in fully saturated medium. To verify the proposed analytical solution, the laboratory and field tests are carried out. After measuring the elastic wave, the void ratios are assessed using proposed equation. The volume based void ratios are also obtained for comparing with the estimated value by several equations. The values estimated by volume, Gassmann and Biot are show good similarity. However, the void ratios based on Wood and Foti methods have a slightly different trend. This study suggests that the theories of Biot and Gassmann may be a useful equation for assessing the void ratio using elastic wave velocities in the field.

• 비파괴검사학회지
• /
• 제36권1호
• /
• pp.9-17
• /
• 2016

The elastic modulus of a 3D-printed Kelvin foam plate is investigated by measuring the acoustic wave velocity of 1 MHz ultrasound. An isotropic tetrakaidecahedron foam with 3 mm unit cell is designed and printed layer upon layer to fabricate a Kelvin foam plate of 14 mm thickness with a 3D CAD/printer using ABS plastic. The Kelvin foam plate is completely filled with paraffin wax for impedance matching, so that the acoustic wave may propagate through the porous foam plate. The acoustic wave velocity of the foam plate is measured using the time-of-flight (TOF) method and is used to calculate the elastic modulus of the Kelvin foam plate based on acousto-elasticity. Finite element method (FEM) and micromechanics is applied to the Kelvin foam plate to calculate the theoretical elastic modulus using a non-isotropic tetrakaidecahedron model. The predicted elastic modulus of the Kelvin foam plate from FEM and micromechanics model is similar, which is only 3-4% of the bulk material. The experimental value of the elastic modulus from the ultrasonic method is approximately twice as that of the numerical and theoretical methods because of the flexural deformation of the cell edges neglected in the ultrasonic method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.804-810
• /
• 2000

In this paper, an experimental identification method is presented to identify the bulge wave and extensional wave propagation speeds in the fluid-filled elastic hose. An fluid-filled hose is hanged vertically for straight position. The exciting device of piston type is developed to generate the bulge wave and extensional wave in the elastic hose. Hydrophones are arranged in the fluid-filled hose linearly to measure the wave pressure. The wave speeds are estimated using the wavenumber-frequency spectrum analysis technique.

• 한국음향학회지
• /
• 제18권2호
• /
• pp.83-89
• /
• 1999

본 논문에서는 유한 원통셸의 강제진동을 탄성파를 이용하여 해석하였다. 원통셸의 강제 진동장을 나타내기 위하여 변위벡터를 이용하였으며, 진동장을 여러 특성과 방향을 갖고 전파하는 탄성파들에 의한 영향의 합으로써 나타내었다. 또한 양 끝단에서 파동의 반사 현상을 고려하는 반사행렬을 이용하였다. 그리고 본 해석 방법을 통하여 반사행렬을 쉽게 구할 수 있기 때문에, 원통셸 양 끝단에서 탄성파들간의 파동변환을 용이하게 예측할 수 있도록 하였다. 이러한 해석 방법을 이용하여 자유단을 갖고 점가진력에 의해 강제 진동하는 유한 원통셸의 진동장에 대한 수치 계산을 수행하였다. 또한 진동장을 이루는 탄성파들의 기여도와 특성, 그리고 원통셸 끝단에서 탄성파들간의 파동변환을 분석함으로써 본 해석 기법의 유용성을 보였다.

• 대한전자공학회논문지
• /
• 제10권3호
• /
• pp.53-60
• /
• 1973

압전결정 LiMbO3와 LiTaO3의 로테이트 Y캇트, X전반의 탄성표면파(Rayleigh 표면파)의 위상속도 및 지연시간의 온도계수를 수치해석방법에 의해서 계산하였으며 LiNbO3 130°로테이트 Y캇트, 총전반의 탄성표면파의 온도계수를 액체 He의 온도로부터 실온까지 측정하였다. 이 지연시간의 온도계수의 실험치 70×10-6/℃는 계산치 72.7×10-6/℃와 잘 일치함을 확인하였다. 또한 LiNbO3 130° 로테이트 Y캇트, X전반의 탄성표면파의 지연시간의 온도계수는 액체 He온도근처에서 약 16×10-6/℃로 작아짐을 알았다.

• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.198-205
• /
• 2003

We considered the variation of elastic wave velocity due to the anisotropy of rock materials and stress level for acoustic emission (AE) source location in cylindrical rock specimens. Elastic wave velocity and AE were measured for Keochang granite and Yeosan marble under various axial stresses and confining pressures. Partition approximation method was suggested and it was compared with the difference approximation method and the least square method.

• 비파괴검사학회지
• /
• 제23권6호
• /
• pp.583-593
• /
• 2003

The effect of liquid confined in a pipe on elastic waves propagating in the pipe wall was studied theoretically and experimentally. The axisymmetric motion of the wave was modeled with the cylindrical membrane shell theory. The liquid pressure satisfying the axisymmetric wave equation was included in the governing equation as a radial load. The phase speed of the wave propagating in the axial direction was calculated, accounting for the apparent mass of the liquid. Experiments were performed in a pipe equipped with ring-shaped, piezoelectric transducers that were used for transmitting and receiving axisymmetric elastic waves in the pipe wall. The measured wave speeds were compared with the analytical ones. This work demonstrates the feasibility of using pipe waves for the determination of the density and, eventually, the flow rate of the liquid in a pipe.

• 한국건설순환자원학회논문집
• /
• 제3권2호
• /
• pp.159-164
• /
• 2015

This paper presents results on a study of the Rayleigh wave scattering in concrete with a steel bar using transient elastic waves. To study the characteristics of the scattered waves induced by a steel bar in concrete, a three-dimensional finite element method was adopted. A case for elastic wave propagation parallel to the steel bar is discussed. The effect of the cover thickness and steel bar diameter on the Rayleigh wave was studied. To confirm the numerical investigations, a concrete specimen containing a steel bar was made, and corresponding transient elastic wave experiments were conducted. It is believed that the result of this study can serve as an important reference in a nondestructive evaluation of concrete with a steel bar.

• 비파괴검사학회지
• /
• 제17권4호
• /
• pp.227-236
• /
• 1997

탄성파 전파 과정의 정량적인 이해와 그 가시화는 결함 탐지는 물론이고, 재료의 물성 평가에 매우 중요하다. 대상 재료가 이방성을 지닐 경우에 탄성파 전파 과정은 복잡해져서 전파 과정의 해석 및 가시화 작업은 탄성파를 이용하는 결함 탐지 및 재질 평가에서는 필수적이다. 이방성 재료에서는 탄성파의 속도가 방향에 따라서 달라짐은 물론이고, 위상 속도와 군 속도의 방향이 어긋나서 파면이 진행하는 방향과 에너지가 진행하는 방향이 달라진다(beam skewing 효과). 특히 복합재료와 같이 이방성이 큰 재료에서는 이 효과가 매우 크게 나타나므로 탄성파를 이용한 시험 결과를 해석하고자 할 때에는 반드시 전파 과정을 이해해야 한다. 이방성 재료에 대해 해석적인 접근에는 한계가 있어서 유한차분법(finite difference method: FDM)과 같은 수치 해석 방법이 유용하게 사용되고 있다. 본 연구에서는 탄성파 전파 과정을 해석할 수 있는 2차원 FDM 프로그램을 개발하고, 이를 이용하여 이방성 재료에서의 탄성파 전파에 대한 전산 시뮬레이션 결과를 비교 분석한다.