• The KIPS Transactions:PartD
• /
• v.9D no.5
• /
• pp.865-876
• /
• 2002

Successful project planning relies on a good estimation of the effort required to complete a project, together with the schedule options that may be available. Existing software effort estimation models are present only the total effort and instantaneous effort function for the software life-cycle. Also, Putnam presents constant effort rate in each phase. However, the size of total effort varies according to the software projects under the influence of its size, complexity and operational environment. As a result, the allocated effort in each phase also differs from one project to another. This paper suggests models for effort allocation in planning, specifying, building, testing and implementing phases followed by the project size and development types. These models are derived from 155 different projects. Therefore, these models can be considered as a practical guideline in management of project schedule and effort allocation.

• The KIPS Transactions:PartD
• /
• v.9D no.2
• /
• pp.259-266
• /
• 2002

The main issue in software development is the ability of software project effort and cost estimation in the early phase of software life cycle. The regression models for project effort and cost estimation are presented by function point that is a software sire. The data sets used to conduct previous studies are of ten small and not too recent. Applying these models to 789 project data developed from 1990 ; the models only explain fewer than 0.53 $R^2$(Coefficient of determination) of the data variation. Homogeneous group in accordance with project delivery rate (PDR) divides the data sets. Then this paper presents general effort estimation models using project delivery rate. The presented model has a random distribution of residuals and explains more than 0.93 $R^2$ of data variation in most of PDR ranges.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.4
• /
• pp.366-374
• /
• 2003

In electric motor coaches, the rolling stocks move by the adhesive effort between rail and driving wheel. Generally, the adhesive effort is defined by the function of both the weight of electric motor coach and the adhesive effort between rails and driving wheel. The characteristics of adhesive effort is strongly affected by the conditions between rails and driving wheel. When the adhesive effort decreases suddenly, the electric motor coach has slip phenomena. This paper proposes a re-adhesion control algorithm which uses the maximum adhesive effort by instantaneous estimation of adhesion force using load torque disturbance observer. Based on this estimated adhesive effort, the re-adhesion control Is peformed to obtain the maximum transfer of the tractive effort.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.6
• /
• pp.429-437
• /
• 2019

This paper deals with a ZEM (Zero-Effort-Miss) based guidance law for the interception of moving targets and characteristics of the guidance law according to time-to-go estimation methods. To derive the ZEM vector feedback guidance command, we introduce a polynomial function with unknown coefficient, and then we determine the coefficient to satisfy initial and terminal constraints. Since the directions of the guidance command and ZEM vectors are adjusted by the time-to-go, general time-to-go estimation methods are proposed, which can generate the vertical and horizontal guidance commands with respect to an arbitrary reference frame. By performing various numerical simulations, the performance and characteristics of the proposed methods are investigated.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.55 no.1
• /
• pp.41-46
• /
• 2006

In electric motor coaches, the rolling stocks move by the adhesive effort between rail and driving wheel. Generally, the adhesive effort is defined by the function of both the weight of electric motor coach and the adhesive effort between rails and driving wheel. The characteristics of adhesive effort is strongly affected by the conditions between rails and driving wheel. When the adhesive effort decreases suddenly, the electric motor coach has slip phenomena. This paper proposes a anti-slip control algorithm which uses the maximum adhesive effort by instantaneous estimation of adhesion force using load torque disturbance observer. Based on this estimated adhesive effort, the anti-slip control is performed to obtain the maximum transfer of the tractive effort.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.877-878
• /
• 2006

In electric motor coaches, the rolling stocks move by the adhesive effort between rail and driving wheel. Generally, the adhesive effort is defined by the function of both the weight of electric motor coach and the adhesive effort between rails and driving wheel. The characteristics of adhesive effort is strongly affected by the conditions between rails and driving wheel. When the adhesive effort decreases suddenly, inertia conversion the electric motor coach has slip phenomena. This paper proposes a anti-slip control algorithm which uses the maximum adhesive effort by instantaneous estimation of adhesion force using load torque disturbance observer. Based on this estimated adhesive effort, the anti-slip control is performed to obtain the maximum transfer of the tractive effort.

• The KIPS Transactions:PartD
• /
• v.12D no.1 s.97
• /
• pp.103-110
• /
• 2005

Software Development is converting from structural to object oriented method. The later software development prefers the iterative process applications, not aterfall process and based on use case model, the requirements are expressed and based on this, analysis, design and coding are accomplished. Therefore, size of the software to be developed is estimated basing on use case and it is only possible to maintain the project success by estimating development effort, cost and development period. Even though development effort estimation models related current use case point. there is no appropriate development effort estimating. This paper shows, as a result of applying the development effort estimating model about UCP to the growth curve, a superior performance improvement to current statistical models. Therefore, estimation of development effort by applying this model, project development maintenance can be appropriately carried out.

• Journal of KIISE:Software and Applications
• /
• v.31 no.1
• /
• pp.20-28
• /
• 2004

Estimation of software project cost, effort, and duration in the early stage of software development cycle is a difficult and key problem in software engineering. Most of development effort and duration estimation models presented by regression model of simple relation function point vs. effort and effort vs. duration instead of considering developer's productivity. But different project have need for different effort according to developer's productivity if the projects are same software size. Also, different duration takes according to developer's productivity if the projects require the same effort. Therefore, models that take into account of productivity have a limited application in actual development project. This paper presents models that can be estimate the duration according to productivity in order to compensate a shortcoming of the previous models. Propose model that could presume development period by various methods based on productivity and compared models' performance. As a result of performance comparison, an estimating model of development period from software size got simple and most good result. The model gives decision-making information of development duration to project management in the early stage of software life cycle.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.141.4-141
• /
• 2001

In this paper the Local Weighted Regression LWR technique is applied to the estimation of aircrcraft parameters. The method consists In improving the Local Weighted Regression LWR technique by adding a data Retention-and-Deletion RD strategy. The improvement comes with reduced computational effort since the two techniques can share their main computational procedures. The purpose of the study was to establish if the proposed algorithm could provide fast and reliable real-time estimations, with accuracy comparable to other well-known off-line identification schemes. The algorithm was tested using specific parameter estimation maneuvers and flight data of the NASA F/A-18 HARV. The results were compared with both the estimation obtained from ...

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.446-450
• /
• 1987

In this paper, overdetermined method is used for high resolution spectral estimation in case of short data record length. To reduce the computational effort and to obtain recursive form of estimation algorithm, we modify data matrix to have near-Toeplitz structure. Then, new recursive algorithm is derived in the form of fast Kalman algorithm. Two stage procedure is used for the estimation of ARMA parameters. First AR parameters are estimated by using overdetermined modified Yule-walker equation, and then MA parameters are implicitly estimated by estimating numerator spectral coefficients(NS).