• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 2003.05a
• /
• pp.149-149
• /
• 2003

To understand environmental paths of the transport and accumulation of endocrine disrupting chemicals (EDCs), a single cell multimedia fate model has been constructed and evaluated. The EDCs of concern were PAHs, Organochlorine Pesticides (OCPs), PCBs, Alkyl phenols, and phthalates. An evaluation model was designed for the multimedia distribution, including air, water, soil, sediment and vegetation. This model was verified using reported values and via monitoring data. Based on collected data, the distribution trends of EDCs with respect to environmental media were analyzed. Those results have applied to the model for the prediction of the spatial and temporal distribution of EDCs in Seoul. Especially, phenol compound, phthalates, PAHs, PCBs and organochlorine pesticides were estimated and the model was verified. This model was successfully conducted to environmental media, such as air (vapor and suspended particles), soils (forest soil, bare soil, and cement-concrete covered soil), water (dissolved and suspended solids), sediment, trees (deciduous and coniferous). The discrepancies between the model prediction and the measured data are approximately within or near a factor of 10 for the PAHs of three rings through that of six rings, implying that multimedia distribution of the PAHs could be predicted with a factor of 10. Concerning about the air equilibrium may be assumed, a fugacity at steady state is similar in all environmental media. Considering the uncertainties of this model, the use of equilibrium models may be sufficient for assessing chemical fates. In this study, a suggestion was made that modeling and estimation of chemicals in environmental multimedia be rigorously evaluated using the measured flux data. In addition, these data should be obtained, for example, from the precise and standardized inventory of the target chemicals. The model (EDC Seoul) will be refined in an on-going research effort and will be used to support decision-making concerning the management of EDCs.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.6
• /
• pp.65-71
• /
• 2018

The Long-Term Hydrologic Impact Assessment (L-THIA) model is a quick and straightforward analysis tool to estimate direct runoff and nonpoint source pollution. L-THIA was originally implemented as a spreadsheet application. GIS-based versions of L-THIA have been developed in ArcView 3 and upgraded to ArcGIS 9. However, a major upgrade was required for L-THIA to operate in the current version of ArcGIS and to provide more options in runoff and NPS estimation. An updated L-THIA interfaced with ArcGIS 10.0 and 10.1 has been developed in the study as an ArcGIS Desktop Tool. The model provides a user-friendly interface, easy access to the model parameters, and an automated watershed delineation process. The model allows use of precipitation data from multiple gauge locations for the watershed when a watershed is large enough to have more than one precipitation gauge station. The model estimated annual direct runoff well for our study area compared to separated direct runoff in the calibration and validation periods of ten and nine years. The ArcL-THIA, with a user-friendly interface and enhanced functions, is expected to be a decision support model requiring less effort for GIS processes or to be a useful educational hydrology model.

• Archives of design research
• /
• v.6 no.1
• /
• pp.47-72
• /
• 1993

Nowadays conmpetltlOn of developing new products is getting keen. We can notice that the role and importance of design are emphasized more than ever.The main cause of this tendency is that technical power is no more a factor which secures the superiority in products competition, as technology is gneneralized in the world. Therefore, design is recognized intensely as a competitive strategy to promote competitive power of products. It is an already known fact that the design for both rational function and charming form to satisfy consumer's desires is a short cut to success, when a company develops a new product to promote competitive power in market. The design which plays a leading role in the activity of developing more cnovenient, more economical and more aesthetic products is called 'Competitive Edge' or 'New Corporate Weapon'. Judging form each company's case of developing products, we can guess that it has its own plan and process of developing new products with defferdnl interest and effort. The strategy of developing products is considered as the most important factor that affects the very existence of rhe company. This thesis is composed of six chapters in all. In the firstchapter, I describe the purpose, method, and scope of study.The second chapter includes the image of form in oil fan heater market in nearby Japan and that of interior in our domestic home and shops, and the trend of word life cycle by analyzing circumstances. The third chapter focuses on consumer's attitude. In the fourth chapter, I compare and test current products of competitive companies including Samsung, Daewoo, Shinilwith those of Gold STar. The trend of products, technique, and design which resulted form this comparison is described. In the fifth chapter I explain the strategy, and process of design of oil fan heater in 1992. The last conclusive chapter presents the major point drawed form the case study, but not includes an estimation of products and the condition of market. In this thesis, I reconsider the general understanding of design and designing process and the value of design as a main factor in the strategy of management by investigating the development of products and the strategy of design, and the process of design.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.12
• /
• pp.1048-1058
• /
• 2017

One of the failure mechanism of spaceborne electronics is a fatigue fracture on solder joint under launch random vibration. Thus, a necessity of early diagnosis through the fatigue life evaluation on solder joint arises to prevent such potential risk of failure. The conventional life prediction methods cannot assure the accuracy of life estimation results if the packaging type changes, and also requires much time and effort to construct the analysis model of highly integrated PCB with various packaging types. In this study, we performed life prediction of PCB based on a reliability and life prediction tool of sherlock as a new approach for evaluating the structural reliability on solder joint, and those prediction results were validated by fatigue tests. In addition, we also investigated an influence of solder height on the fatigue life of solder joint. These results indicated that the Sherlock is applicable tool for evaluating the structural reliability of spaceborne electronic.

• Journal of the Korean Society for Railway
• /
• v.13 no.5
• /
• pp.528-534
• /
• 2010

In the new growth theory, R&D stock is the third factor of production excluding a labor and capital. In this point, a R&D stock is located in a capital which is accumulated by money like existing capital and this is a knowledge capital. The effort for escalating this knowledge capital is R&D investment and R&D stock is an accumulation of this. A contribution degree of the economic growth and a return of R&D investments are analyzed by an estimation of relation R&D stock and a total factor of productivity. This study analyzed R&D stock of railroad R&D investments and compared R&D stock with a technical level. So, a technical level is proportionally escalated following escalation of R&D stock. and compared railroad industry weight on the GDP with a railroad R&D stock weight on whole industries R&D stock. According to a relatively small railroad R&D stock weight against the railroad industry weight, a continuous railroad R&D investment is needed.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.6
• /
• pp.2230-2250
• /
• 2015

Multiple projectors with partially overlapping regions can be used to project a seamless image on a large projection surface. With the advent of high-resolution photography, such systems are gaining popularity. Experts set up such projection systems by subjectively identifying the types of errors induced by the system in the projected images and rectifying them by optimizing (correcting) the parameters associated with the system. This requires substantial time and effort, thus making it difficult to set up such systems. Moreover, comparing the performance of different multi-projector display (MPD) systems becomes difficult because of the subjective nature of evaluation. In this work, we present a framework to quantitatively determine the quality of an MPD system and any image projected using such a system. We have divided the quality assessment into geometric and photometric qualities. For geometric quality assessment, we use Feature Similarity Index (FSIM) and distance-based Scale Invariant Feature Transform (SIFT). For photometric quality assessment, we propose to use a measure incorporating Spectral Angle Mapper (SAM), Intensity Magnitude Ratio (IMR) and Perceptual Color Difference (ΔE). We have tested the proposed framework and demonstrated that it provides an acceptable method for both quantitative evaluation of MPD systems and estimation of the perceptual quality of any image projected by them.

• Journal of Environmental Science International
• /
• v.11 no.12
• /
• pp.1217-1226
• /
• 2002

This study aims at the effective estimation of water supply capacity of small scale reservoir and the proposal of the data which is necessary to establish the water resources management plan of down stream area of the reservoir in the future by comparison and examination about reservoir operation technique for the security of agricultural water in small scale reservoir. The result of flow calculation by Tank model is used for the input data as the inflow data which is needed for the analysis of water supply capacity. Stochastic method, simulation method, and optimization method are used to examine the water supply capacity, and water security amount is compared with each method. From the analyses of water supply capacities by each method, slightly different results are shown in spite of the effort to compare them equally using input data such as inflow data under equal conditions, and the comparison of water supply capacities by each method are as follows; linear planning method, simulation method, and transition probability matrix method in the order of amount from the largest. It is thought that the simulation method in which comparatively reasonable application of the inflow data is possible and is simulated in successive time series dam operation of the three methods used in this study thus, simulation model is proper to estimate the water supply capacity of agricultural small scale reservoir. And it is judged that the heightening of efficiency of water resources utilization according to the development of downstream area of dam may be possible using the upward readjusted water supply amount of $55.18{\tiems}10^6ton$ and $63.7{\times}10^6ton$ at 95% and 90% supply reliability respectively which are above the planning water supply amount of $50.0{\times}10^6$ton when the simulation method is introduced as the standard.

• Journal of Technology Innovation
• /
• v.18 no.1
• /
• pp.99-121
• /
• 2010

The goal of this paper is to analyze the effects of various firm characteristics on the probability for a firm to receive government’s financial supports for R&D. In the empirical analysis, a Probit model is estimated for the 2008 Korea Innovation Survey data. The main contribution of the paper is to investigate the distribution of R&D supports at the national level, instead of the program level. Especially, it is the first academic effort to evaluate the effects of regional and industrial variables. The results show that: (1) firm size and export increase the probability of receiving government’s R&D support; (2) variables measuring firms’ innovative ability, such as official designation as innovative firm, running R&D institute, number of R&D personnel, also have significantly positive effects; (3) firms in the chemical and automobile industries are more likely to receive R&D supports; and (4) firms in Teakyoung and Bukyoung regions are more likely to receive R&D supports.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.6
• /
• pp.71-84
• /
• 2017

Over the past decade, we have witnessed Serious Debates in MISQ and Other Journals Between Two Camps that have Differing Views on the use of Causal Indicators to Measure Constructs. There is the Camp that advocates Causal Indicators (ADVOCATE) and the Camp that opposes Their Usage (OPPONENT). The Debates have been primarily centered on the OPPONENT's Argument that the Meaning of a Latent Variable is determined by its Outcome Variables. However, Little Effort has been made to Validate the ADVOCATE's Dispute (Against the OPPONENT's Arguments) that the Meaning of a Latent Variable is decided by its Causal Indicators if there is no Misspecification. Our Study precisely examines the Integrity of the Argument. For this, we empirically examine how the two Primary Psychometric Properties-Comprehensiveness and Interrelationship-of Causal Indicators Influence Theory Testing between Latent Variables through Three Different Tests (i.e., Comprehensive Test, Interrelationship Test, and Mixed Test). Conducted on Two Different Datasets, Our Analysis Consistently Reveals that Structural Path Coefficients are Hardly Sensitive to the Changes (i.e., Misspecification) in the Properties of Causal Indicators. The Discovery offers Important Evidence that the Sound Theoretical Logic of a Causal Model is not in Sync with the Empirical Mechanism of Parameter Estimation. This Underscores that a Latent Variable Formed by Causal Indicators is empirically an elusive notion that is Difficult to Operationalize. As Our Results have Significant Implications on the Integrity of Numerous IS studies which have conducted Theory or Hypothesis Testing Using Causal Indicators, we strongly advocate Open Discussions among Methodologists regarding Our Findings and Their Implications for Both Published IS Research and Future Practices.

• Journal of Radiation Protection and Research
• /
• v.37 no.2
• /
• pp.63-69
• /
• 2012

The second phase of the national program for fusion energy development in Korea starts from 2012 for design and construction of the fusion DEMO reactor. Radiological assessment for the fusion reactor is one of the key tasks to assure its licensability and the starting point of the assessment is determination of the source terms. As the first effort, the activities of the coolant due to activated corrosion product (ACP) were estimated. Data and experiences from fission reactors were used, in part, in the calculations of the ACP concentrations because of lack of operating experience for fusion reactors. The MCNPX code was used to determine neutron spectra and intensities at the coolant locations and the FISPACT code was used to estimate the ACP activities in the coolant of the fusion DEMO reactor. The calculated specific activities of the most nuclides in the fusion DEMO reactor coolant were 2-15 times lower than those in the PWR coolant, but the specific activities of $^{57}Co$ and $^{57}Ni$ were expected to be much higher than in the PWR coolant. The preliminary results of this study can be used to figure out the approximate radiological conditions and to establish a tentative set of radiological design criteria for the systems carrying coolant in the design phase of the fusion DEMO reactor.