• The KIPS Transactions:PartB
• /
• v.9B no.1
• /
• pp.91-98
• /
• 2002

In this paper, an implementation method of the efficient image transmission stage using watermarking and channel ceding is proposed. Usually, image communication system consists of both a transmitter part and a receiver part. The transmitter part takes charge of copyright protection of the generated image data, and image coding and compression that can deal with channel noises when transmitting. In the transmitter part, we propose a channel coding method which protects both the watermark signal and the original signal for protecting the copyright of image data and solving channel noises when transmitting. Firstly, copyright protection of image data is conducted. For this, image structure analysis is performed, and both the improvement of image quality and the generation of the watermark signal are made. Then, the histogram is constructed and the watermark signals are selected from this. At this stage, by embedding of the coefficients of curve fittness into the lower 4 bits of the image data pixels, image quality degradation due to the embedding of watermark signals are prevented. Finally, turbo coding, which has the most efficient error correction capability in error correction codes, has been conducted to protect signals of watermark and preserved original image quality against noises on the transmission channel. Particularly, a new interleaving method named "semi random inter]easer" has been proposed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11B
• /
• pp.693-699
• /
• 2007

In this Paper we present analysis of efficiency for various encapsulation methods to transport IP datagram over terrestrial digital multimedia broadcasting (T-DMB). The multimedia broadcasting system transmitted in one-way needs the data reliability for efficient transmission. And then It is able to select the independent data service using If encapsulation over T-DMB. We examine the compatibility in adopting T-DMB and the overhead of transmission occurring encapsulation. it also needs the full analysis of data framing because the cost of return channel is relatively higher. We do analysis based on theoretical calculation and propose an efficient, reliable and adaptable method in T-DMB.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.5
• /
• pp.1-9
• /
• 2019

In this paper, we propose the algorithms which determine 1) the efficient anchor-node visiting route of mobile sink in terms of energy supply and 2) the efficient energy amount to be charged to each anchor node, by using the information of each anchor node and the mobile sink. Wireless sensor networks (WSNs) using mobile sinks can be deployed in more challenging environments such as those that are isolated or dangerous, and can also achieve a balanced energy consumption among sensors which leads to prolong the network lifetime. Most mobile sinks visit only some anchor nodes which store the data collected by the nearby sensor nodes because of their limited energy. The problem of these schemes is that the lifetime of the anchor nodes can be shorten due to the increased energy consumption, which rapidly reduces the overall lifetime of WSN. This study utilizes a mobile sink capable of wireless power transmission to solve this problem, so a mobile sink can gather data from anchor nodes while charging energy to them. Through the performance verification, it is confirmed that the number of blackout nodes and the amount of collected data are greatly improved regardless of the size of the network.

• ETRI Journal
• /
• v.24 no.1
• /
• pp.31-42
• /
• 2002

In high-speed multimedia satellite communication systems, it is essential to provide high-quality, economical services by using efficient transmission schemes which can overcome channel impairments appearing in the satellite link. This paper introduces techniques to compensate for rain attenuation and the Doppler shift in the satellite communication link. An adaptive transmission technique with a control algorithm to adaptively allocate transmission schemes is used as a countermeasure to rain attenuation. We introduce a new rain attenuation modeling technique for estimating system performance and propose a novel Doppler shift compensation algorithm with reduced hardware complexity. Extensive simulation results show that the proposed algorithm can provide greatly enhanced performance compared to conventional algorithms. Simulation software and hardware which incorporate the proposed techniques are also demonstrated.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.7
• /
• pp.1-8
• /
• 2012

In this paper, we consider an efficient protocol for the multi-hop relay transmission on a sensor network which can be utilized in a ubiquitous environment. More specifically, we propose an efficient relaying protocol for the distance and position recognition on the proposed sensor network which performs with the differentially bi-orthogonal chirp spread spectrum (DBO-CSS) in the industrial, scientific and medical (ISM) bands. For an efficient networking access, we design and implement four different packet structures, zone information packet, hop information packet, tag information packet, and application serial packet. Additionally, we also propose an efficient position recognition algorithm. Finally, for verification of our proposed protocol's efficiency, we build the testbed system which consists of $15m{\times}15m$ multi-cell and 10 hops in the network.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.3
• /
• pp.79-90
• /
• 2015

Multipath routing technique is recognized as one of the effective approaches to improve the reliability of data forwarding. However, the traditional multipath routing focuses only on how many paths are needed to ensure a desired reliability. For this purpose, the protocols construct additional paths and thus cause significant energy consumption. These problems have motivated the study for the energy-efficient and reliable data forwarding. Thus, this paper proposes an energy-efficient concurrent multipath routing protocol with a small number of paths based on interaction between paths. The interaction between paths helps to reinforce the multipath reliability by making efficient use of resources. The protocol selects several nodes located in the radio overlapped area between a pair of paths as bridge nodes for the path-interaction. In order to operate the bridge node efficiently, when the transmission failure has detected by overhearing at each path, it performs recovery transmission to recover the path failure. Simulation results show that proposed protocol is superior to the existing multipath protocols in terms of energy consumption and delivery reliability.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.5
• /
• pp.791-796
• /
• 2013

Advent of the brain wave health care system is considered as an important issues in the industrial and research area in these days. It is necessary to detect EEG signals in real-time in order to support the medical emergency service for the epileptic or brain infarct patients. Since the efficient network support is an essential factor for the system, several topologies using sensor node based wireless body area network is suggested and simulated in this paper. Finally the Opnet simulation result is evaluated for the efficient topology of the body area network.

• Journal of Korean Institute of Industrial Engineers
• /
• v.33 no.2
• /
• pp.237-245
• /
• 2007

In this paper, a modified PCF (Point Coordination Function) MAC (Medium Access Control) Protocol is proposed to support the multiple direct link communication between STAs (STAtions) in infrastructure mode IEEE 802.11 wireless LANs. By the proposed MAC protocol, the direct link communication between STAs, which are located within the communication range of each other, is allowed without the use of AP (Access Point) as a relay. Moreover, when multiple direct data communication between STAs can be simultaneously performed with a sufficiently small interference, multiple simultaneous direct link communication is allowed for the efficient use of radio bandwidth. AP polls STAs to grant the transmission opportunities using the direct link communication by transmitting the polling frames to STAs. An efficient polling method for granting the transmission opportunities to STAs is proposed to reduce the number of the polling frame transmissions and enhance the PCF MAC performance.

• Journal of Korea Multimedia Society
• /
• v.20 no.2
• /
• pp.254-260
• /
• 2017

Data packets from sensor nodes scattered over measuring fields are generally forwarding to the sink node, which may be connected to the wired networks, in a wireless sensor network. So many data packets are gathered near the sink node, resulting in significant data packet collisions and severe transmission latency. In an event detection application such as object tracking and military, bursty data is generated when an event occurs. So many data packet should be transmitted in a limited time to the sink node. In this paper, we present a delay efficient and bursty traffic friendly MAC protocol called DEBF-MAC protocol for wireless sensor networks. The DEBF-MAC uses a slot-reserved mechanism and sleep period control method to send multiple data packets efficiently in an operational cycle time. Our simulation results show that DEBF-MAC outperforms DW-MAC and SR-MAC in terms of energy consumption and transmission delay.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.5
• /
• pp.110-120
• /
• 1994

Due to the increasing demands in comfortable drivability, most motor companies are developing their own unique shift controller to suppress the shift shock induced by gear change. For a typical automatic transmission system, the dynamic constraints of friction clutch was clarified for efficient program development and major factors effecting the shift transient was confirmed by simulation study. The MIMO LQG/LTR controller was designed to control the turbine and corresponding gear speed. By establishing the control strategy recalling transient response during shift the speed controller mentioned above was used as an indirect torque controller. Consequently a new concept for a systematic design method of shift controller applicable to wide-varying systems was suggested which is time efficient and cost efficient saving a lot of experimental study.