• Journal of Power Electronics
• /
• v.18 no.1
• /
• pp.129-136
• /
• 2018

An accurate state-of-charge (SOC) estimation ensures the reliable and efficient operation of a lithium-ion battery management system. On the basis of a combined electrochemical model, this study adopts the forgetting factor least squares algorithm to identify battery parameters and eliminate the influence of test conditions. Then, it implements online SOC estimation with high accuracy and low run time by utilizing the low computational complexity of the unscented Kalman filter (UKF) and the rapid convergence of a particle filter (PF). The PF algorithm is adopted to decrease convergence time when the initial error is large; otherwise, the UKF algorithm is used to approximate the actual SOC with low computational complexity. The effect of the number of sampling particles in the PF is also evaluated. Finally, experimental results are used to verify the superiority of the combined method over other individual algorithms.

• Proceedings of the KIEE Conference
• /
• 2004.11b
• /
• pp.258-260
• /
• 2004

This paper analyse a operating characteristics when the Community Energy System (CES) is operated islanding mode. In the near future, CES might be one of major energy supply structures. The basic concept of CES is that it supplies electrical and thermal energy to the local customer loads through the islanded power network separated from the grid. The CES must be supplying local load with stable energy on the islanding mode, analysing necessary to thoroughly the operation feature. In order to show them, in this paper, we model the CES with 2.34 MVA DG and simulate the operating feature on the islanding mode of CES. The simulation results show that, in order to stability operate, the CES need the efficient load management and generation control schemes during the transition periods.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.4
• /
• pp.149-156
• /
• 2011

In case of domestic pyrolysis dry distillation gassification technology, it stays at the stage of its early introduction and development. Moreover, the companies possessed of this technology are limited to Japan and some countries in Europe, and domestic operative performance of this system is nominal, so there exist a lot of difficulties in securing its basic data. In addition, considering its operation and management, there happens a corrosion of metals by the production of corrosive gases in time of combustion of waste, and there arise a problem of occurrence of low temperature corrosion on exterior casing or gas ducts of a combustion chamber due to the high temperature corrosion around the burner of an incinerator, lowering the durability of an incinerator. Therefore, this study looked at the problems arising in time of incineration by understanding the characteristics of the pyrolysis dry distillation gassification incinerating facility, and did research on the improvement plan for durability of an incinerator for more economic, efficient waste incineration.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.29 no.4
• /
• pp.34-42
• /
• 2006

This paper considers an assembly-type flowshop scheduling problem in which each job is assembled with two types of components. One type of the components is outsourced with positive lead time but the other type is fabricated in-house at the first stage. The two types of the components should be prepared at the first stage before starting the assembly operation for each job at the second stage. The objective is to schedule the jobs so that the makespan is minimized. Some solution properties and lower bounds are derived and incorporated into a branch and bound algorithm. Also, an efficient heuristic is developed. The performances of the proposed branch and bound algorithm and heuristic are evaluated through computational experiments.

• Journal of the Korean Institute of Plant Engineering
• /
• v.23 no.4
• /
• pp.29-38
• /
• 2018

Through process quality information, the time required for process quality analysis has been drastically shortened, the process defect rate has been reduced, and the manufacturing lead time has been shortened and the on-time delivery rate has been improved. Therefore, The purpose of this study is to develop a quality information analysis system model that effectively shortens the time required for process quality analysis in automobile safety belt parts manufacturing process. As a result of experiments on communication operation between manufacturing execution system (MES) quality server, injection machine control computer, injection machine programmable logic controller (PLC) and terminal, in analyzing quality information, the conventional handwriting input method took an average of 20 minutes, but the new multi-network method took about 2 minutes on average. In addition, the process defect rate was reduced by 13% and the manufacturing lead time was shortened from 28 hours to 20 hours. The delivery compliance rate improved from 96 to 99%.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.317-318
• /
• 2009

본 논문에서는 유비쿼터스 환경에 발맞춰 도서관에 적용되고 있는 RFID 시스템에 대한 기술적 개요와 유용성에 대해 고찰하고, 국내 외 도서관 현황과 현 RFID 시스템의 비교분석 및 사례조사를 통해 기존 RFID 도서관리 시스템의 문제점을 도출하였다. UHF 대역 RFID를 통하여 기존 문제점의 해결 방안을 제시하였으며, 구체적인 시스템 설계를 통해 업무의 효율성 및 이용자 편의성을 RFID 및 USN 기술을 통하여 향상시키는 방을 제시하였다. 본 논문은 정보이용자에 대한 서비스 및 관리 측면에서 효율성을 극대화하여 도서관 선진화를 추구하고자 하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.645-646
• /
• 2023

본 연구에서는 원격강좌(콘텐츠 기반)를 이용하여 학습하는 학습자들의 학습 형태를 분석하여 효율적인 원격강좌 운영을 위한 제도 마련에 대한 필요성을 제시하고자 하였다. 학습자들이 원격강좌를 학습한 정규교과 1년의 데이터를 가지고 분석한 결과 학습자들은 오후8시부터 자정까지 학습하는 빈도가 가장 높았다. 이는 교과 구분 형태인 전공/교양 모두에서 나타나는 분석결과였다. 또한 요일별로 분석해 보면 특정 요일에 학습의 빈도가 높았는데 이 요일은 한 주간의 강의가 종료되는 요일이었다. 이러한 분석 결과를 기반으로 효율적인 원격강좌가 운영되기 위한 제도적 보완 - 원격강좌별로 종료되는 요일을 달리한다든지 -을 생각해 볼 필요가 있다 하겠다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.279-280
• /
• 2022

In the case of domestic coastal ships, an information system for the purpose of managing cargo loading, securing, and inspection processes is not in operation. It presents functional elements that meet the service requirements for information systems for more efficient execution of ship loading and unloading services at port. This is a study on the information system that manages the process of reservation, onboard arrangement, securing and inspection of sea freight.

• Journal of Agricultural Extension & Community Development
• /
• v.20 no.4
• /
• pp.937-952
• /
• 2013

The purpose of this study was to choice the efficient operation for the Rural Revitalization Support Center(RRSC) by using AHP method. AHP method is to assess the importance of the RRSC has come up with the weighting values. According to AHP analysis procedures, the two most important function for the RRSC are eliciting supports for the forum and human resources development management. And we must acknowledge each RRSC has the difference manpower or condition. Therefore, the RRSC need a focus on efficient and working in conjunction of related organizations, in order to promote the effective center of the function. Also, supraorganization need for integrated management.

• KIISE Transactions on Computing Practices
• /
• v.23 no.10
• /
• pp.579-587
• /
• 2017

Cyber Mission Impact Assessment is one of the essential tasks which many militaries and industrial major companies should perform to effectively achieve their mission. The unexpected damage to an organization's assets results in damage to the whole system's performance of the organizations. In order to minimize the damage, it is necessary to quantify the available capacity of the mission, which can be achieved only with the remaining assets, and to immediately prepare a new second best plan in a moment. We therefore need to estimate the exact cyber attack's impact to the mission when the unwanted damage occurs by modeling the relationship between the assets and the missions. In this paper, we propose a new model which deals with the dependencies between assets and missions for obtaining the exact impact of a cyber attack. The proposed model distinguishes task management from asset management for an efficient process, and it is implemented to be optimized using a vectorized operation for parallel processing and using a buffer to reduce the computation time.