• Journal of Korea Water Resources Association
• /
• v.56 no.9
• /
• pp.587-602
• /
• 2023

Due to climate change, population growth, and economic development, the demand for water in the urban water system (UWS) and the energy required for water use constantly increase. Therefore, beyond the traditional method of considering only the water sector, the Nexus approach, which considers synergies and trade-offs between the water and energy sectors, has begun to draw attention. In previous researches, the Nexus methodology was used to demonstrate that the UWS is an energy-intensive system, analyze the water-energy efficiency relationship surrogated by energy intensity, and identify climate (long-term climate change, drought, type), geographic characteristics (topography, flat ratio, location), system characteristics (total supply water amount, population density, pipeline length), and operational management level (water network pressure, leakage rate, water saving) effects on the UWS. Through this, it was possible to suggest the direction of policies and institutions to UWS managers. However, there was a limit to establishing and implementing specific action plans. This study built the energy intensity matrix of the UWS, quantified the impact of city conditions, external influences, and operational management levels on the UWS using the water-energy Nexus model, and introduced water-energy efficiency criteria. With this, UWS managers will be able to derive strategies and action plans for efficient operation management of the UWS and evaluate suitability and validity after implementation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.4
• /
• pp.273-278
• /
• 2002

An efficient low-input system (LIS) for fertiliser use in rice cultivation is necessary to reduce fossil energy use and pollution. Japanese people like Japonica rice, especially cv. Koshihikari. However, it has very low lodging resistance in Japanese weather condition. Our objective was to develop a LIS with the minimum sacrifice of grain yield in rice. Koshihikari was grown using conventional fertilization as a control (CON) with 4 g N $m^{-2}$., 8g $P_2$ $O_{5}$ $m^{-2}$ and 8 g $K_2$O $m^{-2}$ as a basal fertilizer dressing. It was compared with a low fertilizer treatment (LF) with only 4 g $P_2$ $O_{5}$ $m^{-2}$ as a basal dressing in the first year and no basal phosphorus fertilizer in the second year. Chopped rice straw was incorporated into the soil before the cropping season in both years. Fertilizer of 4 g N $m^{-2}$ was top-dressed at 15 days before heading in CON plots and 30 days before heading in LF plots in both years. Lodging was significantly less in LF than in CON plots, however, no rice straw effect was found in low fertilized condition. Grain yields in LF plots were reduced by 15-16% below those of CON plots. Lower yields in LF plots were associated with a reduced number of spikelets per unit area. However, big spikelet size was acquired in LF by 10 days earlier N top dressing than CON plots. A close relationship was found between spikelet numbers and N content of the plant at heading, and between grain yield or shoot dry weight and N content of the plant at maturity. Regardless of the fertilizer application methods, N use efficiency for the number of spikelets, final total dry matter and grain yield was essentially identical among fertilizer treatments. The reduced growth and yield in the LF plots resulted from low absorption of nitrogen. Conclusively, LIS can drastically reduce chemical fertilizer use and facilitate harvest operations by reducing lodging with some yield reduction..

• Journal of Electrochemical Science and Technology
• /
• v.13 no.3
• /
• pp.390-397
• /
• 2022

The use of microwaves as the energy source for synthesis and sintering of ceramics offers substantial advantages compared to conventional gas-fired and electric resistance furnaces. Benefits include much shorter processing times and reaching the sintering temperature more quickly, resulting in superior final product quality. Most oxide ceramics poorly interact with microwave irradiation at low temperatures; thus, a more complex setup including a susceptor is needed, which makes the whole process very complicated. This investigation pursued a new approach, which enabled us to use microwave irradiation directly in poorly coupled oxides. In many solid-state electrochemical devices, the support is either metal or can be reduced to metal. Metal powders in the support can act as an internal susceptor and heat the entire cell. Then sufficient interaction of microwave irradiation and ceramic material can occur as the sample temperature increases. This microwave heating and exothermic reaction of oxidation of the support can sinter the ceramic very efficiently without any external susceptor. In this study, yttria stabilized zirconia (YSZ) and a Ni-YSZ cermet support were used as an example. The cermet was used as the support, and a YSZ electrolyte was coated and sintered directly using microwave irradiation without the use of any susceptor. The results were compared to a similar cell prepared using a conventional electric furnace. The leakage test and full cell power measurement results revealed a fully leak-free electrolyte. Scanning electron microscopy and density measurements show that microwave sintered samples have lower open porosity in the electrode support than conventional heat treatment. This technique offers an efficient way to directly use microwave irradiation to sinter thin film ceramics without a susceptor.

• Transactions of the Korean hydrogen and new energy society
• /
• v.11 no.1
• /
• pp.43-49
• /
• 2000

The heat transportation from a complex of industry to a rural area needs more efficient method because the distance between them is usually more than 10km. Conventional heat transportation using steam or hot water via pipe line has limits in transportation distance (about 3~5 km) because of the heat loss and frictional loss in the pipe line. Metal hydride can absorb or discharge hydrogen through exothermic or endothermic reaction. After releasing hydrogen from metal hydride by means of the waste heat from industry, we can transport this hydrogen to urban area via pipe line. In urban areas, other metal alloy reacts with this hydrogen to form metal hydride and produces heat for heating. Cool heat is also obtained if it is possible to use metal hydride with low reaction temperature. Therefore, metal hydride can be used as a media for transportation and storage of heat. $MmNi_{4.5}Al_{0.5}Zr_{0.003}$, $LaNi_5$, $Zr_{0.9}Ti_{0.1}Cr_{0.6}Fe_{1.4}$, $MmNi_{4.7}Al_{0.1}Fe_{0.1}V_{0.1}$ alloys were selected for this purpose and the properties of those metal hydrides were discussed. The design and control techniques were proposed and discussed for this heat transportation system using metal hydride.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2641-2646
• /
• 2009

The more growing on home automation system at automatic control, the more efficiency required for energy consumption and for recycling energy in near future. Heating is essential in general apartment. Heating method is two types in apartment. One uses electricity, and other one uses warm water. If use electricity, is not efficient by rise of electric charges. But, It can reduce much in expense aspect, if use warm water. When use warm water, temperature of warm water is not equal from all pipe parts. Therefore, indoor tempera can be unequal with set point. Solution of these problems is as following. Temperature sensor in warm water attach pipe. The measured temperature transmits by real time. Temperature of warm water controls in receiver side. In this paper, we propose an automatic temperature transmission system for the heating pipe at home, that is a low-power based, and supply the energy source from a small AC motor resided in bottom cement mortal. The proposed system is used in power mechanism from a collision process of water-jet using propeller water-difference and also designed a CPU module by Atmega8 at ATMEL co., Inc. and a communication module by CC1020 at Chipcon co., Inc.

• Journal of Energy Engineering
• /
• v.20 no.3
• /
• pp.200-208
• /
• 2011

KHNP (Korea Hydro & Nuclear Power Co.) defines and manages equipment of Nuclear Power Plants systematically with functional importance determination of each equipment for efficient maintenance and optimal preventive maintenance. But the existing functional importance determinations have some different results between the plants, systems and engineers due to gap of understanding of classification criteria because they have been done in terms of equipment level rather than function level. so that caused the repeated work. To make up for this problem improve methodology of functional importance determination using MR (Maintenance Rule) and do classification of equipment for new nuclear power plants based on function level. In addition, methodical documentation for basis of importance determination is done to help that system engineers can easily understand and use.

• Advances in concrete construction
• /
• v.10 no.4
• /
• pp.357-367
• /
• 2020

The impulse of this paper is to examine the influence of unsteady flow comprising of Eyring-Powell nanofluid over a stretched surface. This work aims to explore efficient transfer of heat in Eyring-Powell nanofluid with bio-convection. Nanofluids possess significant features that have aroused various investigators because of their utilization in industrial and nanotechnology. The influence of including motile microorganism is to stabilize the nanoparticle suspensions develop by the mixed influence of magnetic field and buoyancy force. This research paper reveals the detailed information about the linearly compressed Magnetohydrodynamics boundary layer flux of two dimensional Eyring-Powell nanofluid through disposed surface area due to the existence of microorganism with inclusion the influence of non- linear thermal radiation, energy activation and bio-convection. The liquid is likely to allow conduction and thickness of the liquid is supposed to show variation exponentially. By using appropriate similarity type transforms, the nonlinear PDE's are converted into dimensionless ODE's. The results of ODE's are finally concluded by employing (HAM) Homotopy Analysis approach. The influence of relevant parameters on concentration, temperature, velocity and motile microorganism density are studied by the use of graphs and tables. We acquire skin friction, local Nusselt and motil microorganism number for various parameters.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6053-6059
• /
• 2013

Heat pumps have attracted considerable attention as a green energy system because they use renewable energy, such as geothermal, solar energy and waste heat, and can have a low electricity consumption rate compared to other conventional electric heating system. Many studies of high efficient heat pump system design was performed previously,but it is not easy to find any an analytical model that consists of components (e.g. compressor, heat exchangers, and expansion valve), not only having an interrelation and interconnection each other but also being flexible to any change in geometry and operating parameters. In this study, a computational model was developed for a heat pump with warm air as a heat source using the one-dimensional modeling software, AMESim. In combination with an independently-developed analytical model for a scroll compressor, the heat pump model can simulate the physical characteristics and actual behavior of the heat pump precisely. In addition, the reliability of the model was improved by verifying the simulation results using experimental data. The simulation data fell into the 10% error range compared with the experimental data. The heat pump model can be used for system optimization studies of product development and applied to other applications in a range of industrial field.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.6
• /
• pp.219-228
• /
• 2007

End-to-end path setup and maintenance are very important for mobile ad-hoc wireless communications, because of the mobility and the limited battery capacity of the nodes in the networks. the AODV routing protocol is the one of mary proposed protocols. However, there are route failure problem with the Proposed protocols between intermediate nodes due to such mobility and exhausted battery characteristics, and this is because only the shortest hop count is considered for the route setup. If route failure happens. Problem such as the waste of bandwidth and the increment of the energy consumption occur because of the discarding data packets in the intermediate nodes and the path re-setup process required by the source node. In addition, it obviously causes the network lifetime to be shortened. This paper proposes a routing protocol based on the AODV routing protocol that it makes use of the remaining energy, signal strength and SNR of the MAC layer resources to setup a path.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.10
• /
• pp.941-948
• /
• 2016

In this paper, we efficiently simulated for collecting the data from the fixed sensor and mobile sensor of patients using the LEACH-Mobile method. The LEACH-Mobile method is the protocol to increase the mobility by adding the mobile node to the existed LEACH(:Low Energy Adaptive Clustering Hierarchy) protocol. It improves the mobility of The LEACH-Mobile in the LEACH, however it consumes more energy than the existed LEACH. There is reason why we use the LEACH-Mobile that the monitoring system is generally done by the CCTV and an periodic checkup by nurses. However the number of nurse is a few in the most of hospital. It can happen the accidents of the patients in out of the CCTV when the nurse can not see the monitoring system in the hospital. Therefore it is simulated to continuously gather the data of the position and sensors in the five situation of moving the patients in the hospital, it gets the result that the management of the mobile patients is more efficient.