• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.15 no.1
• /
• pp.137-158
• /
• 2004

This study was carried out to analyze the actual situation of placement and to suggest concrete contents for the improved placement. Through literature reviews and empirical analysis, the followings are to be concluded. Firstly, the necessity of the placement are fully perceived by students and people working at culinary part in hotels. Both sides acknowledge that the placement is needed for the. better understanding of operations related to culinary art in a hotel. However, on the efficiency of the placement there is a big disagreement between them. Most of students participating placement programme have had a tendency to work with culinary staff without concrete training manuals and programmes. In addition, it was found that being exposed to different F&B outlets and kitchens is useful to get a variety of operational experiences. Secondly, as shown from the questionnaire regarding the importance of place, all the students who were asked marked more than 3.0 on the Likert Scale. Especially to the questions such as kitchen organization, job descriptions, safety and hygiene, seasonings, taste, vegetables and fruits, the average was above 3.6 which si the highest. As for the kitchen staff, the average was above 3.0, which imply that they also consider a placement important. The part showing the highest average were food safety and hygiene, dealing with kitchen equipments, appliances and knives. In conclusion, appropriate and concrete placement manuals are to be provided for students and hosting hotels in order to obtain educational accomplishments when implementing placement programme.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.6
• /
• pp.2127-2137
• /
• 2017

A virtual power plant (VPP) is a system that virtually integrates power resources based on the VPP participating customer (VPC) unit and operates as a power plant. When VPP operators manage resources to maximize their benefits, load reduction instructions may focus on more responsive VPCs, or those producing high profitability, by using VPC resources with high operation efficiency. VPCs may thus encounter imbalance problems during operation. This imbalance in operation time would bring more participation for some VPCs, causing potential degradation of their resources. Such an operation strategy would be not preferable for VPP operators in managing the relationship with VPCs. This issue impedes both continual VPC participation and economical and reliable VPP operation in the long term. An operation algorithm is therefore proposed that considers the operation time of VPC generators for mandatory reduction of power resource consumption. The algorithm is based on constraints of daily and annual operation times when VPP operators of local generators perform capacity-market power transactions. The algorithm maximizes the operator benefit through VPP operations. The algorithm implements a penalty parameter for imbalances in operation times spent by VPC generators in fulfilling their obligations. An evaluation was conducted on VPP operational effects by applying the algorithm to the Korean power market.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.1
• /
• pp.1-9
• /
• 2001

The development of flexible automation in the manufacturing industry is concerned with production activities performed by unmanned machining system A major topic relevant to metal-cutting operations is monitoring toll wear, which affects process efficiency and product quality, and implementing automatic toll replacements. In this paper, the measurement of the cutting force components has been found to provide a method for an in-process detection of tool wear. The static com-ponents of cutting force have been used to detect flank wear. To eliminate the influence of variations in cutting conditions, tools, and workpiece materials, the force modeling is performed for various cutting conditions. The normalized force dis-parities are defined in this paper, and the relationships between normalized disparity and flank were are established. Final-ly, artificial neural network is used to learn these relationships and detect tool wear. According to proposed method, the static force components could provide the effective means to detect flank wear for varying cutting conditions in turning operation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.6
• /
• pp.969-978
• /
• 2016

Around the world are increasing the demand for ESS. Currently, the domestic is expected to benefit by operating ESS. In the domestic, it is expected to benefit from operations of the installed ESS because of the introduction of ESS less capacity. However ESS capacity to the maximum profit occurs is unknown. ESS is different from the charge-discharge characteristics and the reserve to replace, depending on the application. Therefore, it should be established in accordance with the ESS optimal capacity according to the purpose used because it can maximize the quality and efficiency of the electric energy. To the ESS optimal capacity estimation by the purpose used, It should compare the investment cost caused by ESS facility installation and operation cost caused by operating ESS. In this paper, the operation mathematical model for estimating marginal operation costs established. In operation mathematical model, operating cost is considered fuel cost and no-load cost start-up cost. Because no-load cost and start-up cost are not related to cost and power plant output, there are expressed an integer variable costs as a step function.

• Journal of Mechanical Science and Technology
• /
• v.18 no.10
• /
• pp.1809-1818
• /
• 2004

The dependence of the ignition timing in an HCCI engine on intake temperature and pressure, equivalence ratio, and fuel species is investigated with a zero-dimensional model combined with a detailed chemical kinetics. The accuracy of the model is evaluated by comparing measured and computed results in a propane-fueled HCCI engine. It is shown that the peak pressure values are reproduced within 10% and ignition timing within 5$^{\circ}$ CA. The heat loss through the walls is found to affect significantly on the ignition timing for different inlet conditions. It is also shown that for the propane-fueled engine, the tolerance in intake temperatures is 20-25K and the tolerance in intake pressure is about 1 bar for stable operation without misfire or too early ignition. Comparison of propane and heptane fuels indicates that the tendency to misfire when heptane is employed as the fuel is less than that when propane is employed with the same wall temperature conditions. However, the heptane-fueled engine may have a lower compression ratio to avoid too early ignition and hence lower efficiency. For the selected set of engine parameters, stable operations might be achieved for the heptane-fueled engine with twice as much tolerance in intake temperatures as for the propane-fueled engine.

• Korean Management Science Review
• /
• v.21 no.2
• /
• pp.191-213
• /
• 2004

This study addresses the evaluation criteria of multimedia authoring tools(MATs), the way which decision-maker can exclude outlier matrix from group using the concept of the compatibility index, and how AHP can be applied to the selection of MATs in a group decision-making environment. The AHP technique allows an evaluator to quantify the relative importance of elements at each hierarchy and to calculate the composite relative weights for each product(i.e. MATs). This decision process allows setting to priority of the MATs based on the AHP. The results indicated that technical ability of MATs was the most significant factor in affecting their decision, trailed by managerial efficiency and vendor support. To the experts, multimedia data support was the less important than development interface. Also, the results indicated that product A(0.510) was their first choice, trailed by product C(0.286) and B(0.204). Assessing the composite relative weights revealed that expert group's members were consistent with the rankings of decision variables(evaluation criteria variables) statistically in selecting their MATs. Therefore, we believed that expert group's members have achieved sufficient agreement to permit the use of geometric mean to average the group's preference without obscuring the differences of individual opinions.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.3
• /
• pp.57-61
• /
• 2012

In order to analyze the ECG, it is important to pinpoint the repeat interval of the ECG. In this paper, we present an efficient algorithm for finding the QRS complex on the ECG. We escaped from the conventional methods to go through multiple steps of preprocessing to make ECG easier to find the QRS complex. We selected the candidate peak that has the possibility of the QRS complex in original ECG, and used technique to find the QRS complex among the candidate peak. In this way, we could get similar efficiency to Pan & Tompkins Algorithm that is most representative QRS complex detection algorithm, just used fewer operations than Pan & Tompkins Algorithm.

• Journal of the Korean Society for Library and Information Science
• /
• v.38 no.2
• /
• pp.119-136
• /
• 2004

The purpose of this study is to analyze cases of several academic libraries, both in Korea and other countries, which have outsourced part or all of cataloging operations and examine current trends and controversy over outsourcing. Contrary to expectations of reduced expenses and increased efficiency in cataloging, outsourcing often results in bibliographic records of low quality which require additional costs to correct errors and maintain consistency and accuracy of records, and therefore, fails to reach the goal. Due to the absence of high quality bibliographic utilities, union catalogs, and authority databases, and lack of expertise in cataloging among outsourcing service providers, it seems that outsourcing is not currently an appropriate tactic for cataloging in academic libraries in Korea.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1332-1342
• /
• 2014

This paper proposes a novel test circuit for SiC transistors. On-state resistance under practical application conditions is an important characteristic for the device reliability and conduction efficiency of SiC transistors. In order to measure the on-state resistance in practical applications, high voltage is needed, and high current is also necessary to ignite performance for the devices. A soft-switching circuit based on synchronous buck topology is developed in this paper. To provide high-voltage and high-current stresses for the devices without additional spikes and oscillations, a resonant circuit has been introduced. Using the novel circuit technology, soft-switching can be successfully realized for all the switches. Furthermore, in order to achieve accurate measurement of on-state resistance under switching operations, an active clamp circuit is employed. Operation principle and design analysis of the circuit are discussed. The dynamic measurement method is illustrated in detail. Simulation and experiments were carried out to verify the feasibility of the circuit. A special test circuit has been developed and built. Experimental results confirm that the proposed circuit gives a good insight of the devices performance in real applications.

• Journal of Biosystems Engineering
• /
• v.30 no.5 s.112
• /
• pp.280-284
• /
• 2005

Front the production on the farm to the consumer, agricultural products are subject to various physical treatments involving mechanical techniques and devices. It is essential to understand the physical laws governing the response of these biological materials so that the machines, processes, and handling operations can be designed fur maximum efficiency and the highest quality of the end products. A compression test system was developed to test the physical properties of fruits including apple, pear, and peach which may lead to a better understanding of the physical laws. The test system consisted of a digital storage oscilloscope and simple mechanism which can apply quasi-static compression to fresh fruits. Rupture force, energy, and deformation were measured at the five levels of compression speed from 1.25 to 62.5 mm/min for each internal and external tissues. Rupture forces for apple and pear were in the range of 42.2 to 46.2 N and 38.8 to 41.2 N for external and infernal tissues, respectively. Rupture forces fir peach external tissues were in the range of 48.2 to 54.0 N.