• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1113-1118
• /
• 2008

In the hot forging process, The forging defects that are caused by metal were strain, temperate, and inclusion. In this paper, the computer simulation analyzed the effective plastic strain and temperature behaviors. The quantitative analyses which proposed the effective mold design of S/CAM shaft was executed. The parameters of forging shape that affected on the optimize conditions that was calculated with simple equation were investigated. it is expected that the developed analysis model and design technique would greatly contribute to the drum brake optimal design considering temperature affected and material behaviors. This development could save more than 20% of production cost and reduced failure rate to more than 30%. By improving the life span of mold from 15,000 to 25,000, financial difficulty of company imposed on a mold manufacture could be overcome.

• Food Science and Biotechnology
• /
• 제18권5호
• /
• pp.1293-1297
• /
• 2009

In this study, drying kinetics of onion slices was examined in a laboratory scale vacuum dryer at an air temperature in a range of $50-70^{\circ}C$. Moisture transfer from onion slices was described by applying the Fick's diffusion model, and the effective diffusivity was calculated. Temperature dependency of the effective diffusivity during drying process obeyed the Arrhenius relationship. Effective diffusivity increased with increasing temperature and the activation energy for the onion slices was estimated to be 16.92 kJ/mol. The experimental drying data were used to fit 9 drying models, and drying rate constants and coefficients of models tested were determined by non-linear regression analysis. Estimations by the page and Two-term exponential models were in good agreement with the experimental data obtained.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제12권3호
• /
• pp.123-130
• /
• 2004

Control algorithms for an absorption air conditioning system may be developed by using dynamic models of the system. The simplified effective dynamic models, which can predict the dynamic behaviors of the system, may help to develop effective control algorithms for the system. In this study, control algorithms for an absorption air conditioning system were developed by using a dynamic simulation program. A cooling water inlet temperature control algorithm, a chilled water outlet temperature control algorithm, and a supply air temperature control algorithm, were developed and analyzed. The steepest descent method was used as an optimal algorithm. Simulation results showed energy savings and the effective controls of an absorption air conditioning system.

• 대한한의학회지
• /
• 제29권3호
• /
• pp.11-20
• /
• 2008

Objectives: Warm-needling is a method combining the effects of acupuncture with the effects of moxibustion. We need to standardize the characteristics of warm-needling in order to achieve consistency in its operational mechanisms and effects, which will improve clinical ability in the field of Eastern medicine. Methods: In this study, using the LabVIEW system on the warm-needling technique, we measured and compared partial temperature changes which varied according to the density of the moxa cone and the moxa cone's core peak temperature. Results& Conclusions: Examination of the warm-needle's partial temperature in relation to the cone density of the 0.8g moxa specimen suggests that a lower density of the moxa cone corresponds to a higher peak temperature and but with a shorter duration. During the effective stimulus time, the lower the density of the moxa cone, the shorter the duration of the effective stimulus time and the higher the mean temperature. Conversely, the higher the density of the moxa cone, the longer the effective stimulus time and lower the mean temperature.

• ETRI Journal
• /
• 제27권3호
• /
• pp.319-325
• /
• 2005

In this paper the effect of temperature on the electrical properties of organic semiconductor disperse orange dye 25 (OD) have been examined. Thin films of OD have been deposited on $In_{2}O_{3}$ substrates using a centrifugal machine. DC current-voltage (I-V) characteristics of the fabricated devices $(Al/OD/In_{2}O_{3)$ have been evaluated at varying temperatures ranging from 40 to $60^{\circ}C$. A rectification behavior in these devices has been observed such that the rectifying ratio increases as a function of temperature. I-V characteristics observed in $Al/OD/In_{2}O_{3)$ devices have been classified as low temperature $({\leq} 50^{\circ}C)$ and high temperature characteristics (approximately $60^{\circ}C$). Low temperature characteristics have been explained on the basis of the charge transport mechanism associated with free carriers available in OD, whereas high temperature characteristics have been explained on the basis of the trapped space-charge-limited current. Different electrical parameters such as traps factor, free carrier density, trapped carrier density, trap density of states, and effective mobility have been determined from the observed temperature dependent I-V characteristics. It has been shown that the traps factor, effective mobility, and free carrier density increase with increasing values of temperature, whilst no significant change has been observed in the trap density of states.

• 한국자동차공학회논문집
• /
• 제25권3호
• /
• pp.336-343
• /
• 2017

Intake air conditions, such as air temperature, pressure, and humidity, are very important parameters that influence engine performance including combustion and emissions characteristics. The purpose of this study is to investigate the effects of intake air temperature on combustion and exhaust emissions characteristics in a single cylinder diesel engine. In this experiment, an air cooler and a heater were installed on the intake air line and a gas flow controller was installed to maintain the flow rate. It was found that intake air temperature induced the evaporation characteristics of the fuel, and it affects the maximum in-cylinder pressure, IMEP(indicated mean effective pressure), and fuel consumption. As the temperature of intake air decreases, the fuel evaporation characteristics deteriorate even as the fuel temperature has reached the auto-ignition temperature, so that ignition delay is prolonged and the maximum pressure of cylinder is also reduced. Based on the increase in intake air temperature, nitrogen oxides(NOx) increased. In addition, the carbon monoxide(CO) and unburned hydrocarbons(UHC) increased due to incomplete fuel combustion at low intake air temperatures.

• 대한기계학회논문집A
• /
• 제24권3호
• /
• pp.710-717
• /
• 2000

Tensile and fracture toughness tests of the cold-rolled STS 304 steel plate for membrane material of LNG storage tank were performed at wide range of temperatures, 11 IK(boiling point of LNG), 153K , 193K and 293K(room temperature). Tensile strength significantly increases with a decrease in temperature, but the yield strength is relatively insensitive to temperature. Elongation at 193K abruptly decreases by 50% of that at 293K, and then decreases slightly in the temperature range of 193K to 111K. Strain hardening exponents at low temperatures are about four times as high as that at 293K. Elastic-plastic fracture toughness($J_c$) and tearing modulus($T_{mat}$) tend to decrease with a decrease in temperature. The $J_c$ values are inversely related to effective yield strength in the temperature range of 111K to 293K. These phenomena result from a significant increase in the amount of transformed martensite in low temperature regions.

• Progress in Superconductivity
• /
• 제6권2호
• /
• pp.108-112
• /
• 2005

We investigated temperature behavior of superconducting fault current limiters (SFCLs) during quenches. Knowledge on temperature behavior during quenches is important to the design of SFCLs, because the temperature of SFCLs is related to their stability. SFCLs were fabricated by patterning $Au/YBa_2Cu_3O_7$ thin films grown on sapphire substrates into meander lines by photolithography. A gold film grown on the back side of the substrate was patterned into a meander line, and used as a temperature sensor. The front meander line was subjected to simulated AC fault currents, and the back line to DC current. They were immersed in liquid nitrogen during the experiment for effective cooling. Overall, temperature at the back side of SFCLs was close to that at the front side. It was closer at the beginning of faults, and at lower applied voltages. Temperature distribution at the back side was even except at the edge, as at the front side. These results tell that the whole SFCL was heated to similar degree during quenches, and that effective cooling of SFCLs at the back side is as important to the stability of SFCLs as at the front side. The results could be explained with the concept of heat transfer within the film.

• 대한전자공학회논문지SD
• /
• 제40권5호
• /
• pp.290-297
• /
• 2003

전자와 정공의 온도 관련 이온화 계수로부터 추출한 온도 함수의 유효 이온화 계수 및 전자 이동도를 이용하여 실리콘 전력 MOSFET의 항복 전압과 on 저항을 위한 온도 함수의 해석적 표현식을 유도하였다. 온도 함수의 해석적 항복 전압 결과를 4x10/sup 14/ cm/sup -3/, 1x10/sup 15/ cm/sup -3/, 6x10/sup 16/ cm/sup -3/의 도핑 농도에 대해 각각 실험 결과와 비교하였고, 온도 및 항복 전압 함수의 on 저항 변화도 각각 실험 결과와 비교하였다. 각농도에 따른 온도 함수의 해석적 항복 전압은 77∼300k의 온도 범위에서 실험 결과와 10% 이내의 오차로 잘 일치하였다.

• 한국유기농업학회지
• /
• 제5권1호
• /
• pp.101-110
• /
• 1996

Inorder to minimize the daily intake amount of nitrate by chinese cabbage, the favorate vegetable for Korean, the influences of storage conditions at different temperature and light or dark treatments after post-harvest and effects of cooking temperature and infrared rays on changes of nitrate contents in edible parts of chinese cabbage were determined. The nitrate contents on midrib and leaf blade in chinese cabbage during post-harvest were decreased steeply in 2 days and decreased slowly again in 5 days. The temperature treatment to decrease the nitrate contents in midrib and leaf blade of chinese cabbage were effective as the following of $25^{\circ}C$> $15^{\circ}C$ > $-4^{\circ}C$ > $-10^{\circ}C$. The nitrate contents of midrib and leaf blade were decreased in the timecourse of post-harvest. It is more effective to store in $4^{\circ}C$ than in $15^{\circ}C$, and is more effective in transparent vinyl package than in black vinyl package, but the treatment of light is more effective than the treatment of temperature. The nitrate contents of midrib decreased rapidly by 17.9% in the treatment of 5 days at$ 15^{\circ}C$. By treatment of $80^{\circ}C$, $90^{\circ}C$, $100^{\circ}C$ water, the nitrate contents of midrib were increased slightly, but decreased in leaf blade. It reached 68.5%, 50.6%, 45.9% in the leaf blade respectively by treatment of 80%, 90%, 100% water at 1 min. By infrared rays treatment, the nitrate contents of midrib did not change in 3 min but increased rapidly after 6 min, and in the leaf blade it increased continually after 1 min.