• 한국산학기술학회논문지
• /
• 제21권11호
• /
• pp.740-745
• /
• 2020

콘크리트 박스거더교의 합리적인 설계 온도하중을 산정하기 위하여, 1개의 교량시험체를 제작하였다. 교량시험체에 설치된 23개의 온도 게이지에서 1년간의 여름과 겨울기간에 30분 간격으로 하루에 48세트의 온도를 측정하였다. 상부 콘크리트와 측벽, 하부슬래브에 두께에 따른 온도변화를 검토하기 위하여 두께에 따라 여러 온도게이지를 부착하였다. 각 측점에서 측정된 온도를 통계 처리하여 추세선과 표준오차를 산정하고, 대표측점의 온도분포와 추세선을 제시하였다. 이를 바탕으로 Euro code에서 제시한 대기온도에서 여름철의 최고 유효온도와 겨울철의 최저 유효온도를 각각 산정하였다. 최고 유효온도는 35℃ 이상에서 Euro code와 비교하여 1.5~2℃ 높게 산정되었고, 최저 유효온도는 -13℃~-19℃에서 0.5~1.1℃로 더 낮게 분석되었다. 양산지방의 50년빈도 최고 및 최저 기온에 따른 본 연구의 유효온도와 비교해 보면, 최고 유효온도는 4.7℃ 높게, 최저 유효온도는 4.5℃ 더 낮게 산정되었다. 점점 높아지는 기후변동을 고려하고, 본 분석의 결과를 반영하면, 현 온도설계기준은 그 범위를 더 크게 하는 것이 필요한 것으로 판단된다.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권2호
• /
• pp.307-310
• /
• 2016

The operational cost for maintaining the superconductivity of high-temperature superconducting (HTS) cables needs to be reduced for feasible operation. It depends on factors such as AC loss and heat transfer from the outside. Effective operation requires design optimization and suitable operational conditions. Generally, it is known that critical currents increase and AC losses decrease as the operational temperature of liquid nitrogen ($LN_2$) is lowered. However, the cryo-cooler consumes more power to lower the temperature. To determine the effective operational temperature of the HTS cable while considering the critical current and AC loss, critical currents of the HTS cable conductor were measured under various temperature conditions using sub-cooled $LN_2$ by Stirling cryo-cooler. Next, AC losses were measured under the same conditions and their variations were analyzed. We used the results to select suitable operating conditions while considering the cryo-cooler's power consumption. We then recommended the effective operating temperature for the HTS cable system installed in an actual power grid in KEPCO's 154/22.9 kV transformer substation.

• 한국강구조학회 논문집
• /
• 제28권6호
• /
• pp.449-458
• /
• 2016

강박스거더교의 온도하중을 위한 유효온도를 산정하기 위하여, 강박스거더교의 시험체와 실교량에서 온도 데이터가 2년간 측정되었다. 이 실험체와 실교량의 온도 측정결과를 바탕으로 대기온도에 대한 최고 및 최저 유효온도를 2014년, 2015년, 그리고 연속 2년간 산정하였다. 산정된 최고, 최저 유효온도는 EURO code, 그리고 현행 도로교 설계기준과 서로 비교 평가되었다. 2년간(2 year) 측정한 데이터 기준으로 최대 유효온도와 Euro code의 결정계수는 교량 시험체에서 R=0.894, 실교량에서 R=0.927이 산정되며, 최저 유효온도는 교량 시험체에서 R=0.992, 실교량에서 R=0.813이 산정되었다. 또한 연구 결과는 도로교설계기준(한계상태설계법)의 최고온도와 유사하든가 약간 초과하는 것으로 평가되었다.

• 한국재료학회지
• /
• 제24권10호
• /
• pp.520-525
• /
• 2014

Effects of Cu and B on effective grain size and low-temperature toughness of thermo-mechanically processed high-strength bainitic steels were investigated in this study. The microstructure of the steel specimens was analyzed using optical, scanning, and transmission electron microscopy; their effective grain size was also characterized by electron back-scattered diffraction. To evaluate the strength and low-temperature toughness, tensile and Charpy impact tests were carried out. The specimens were composed of various low-temperature transformation products such as granular bainite (GB), degenerated upper bainite (DUB), lower bainite (LB), and lath marteniste (LM), dependent on the addition of Cu and B. The addition of Cu slightly increased the yield and tensile strength, but substantially deteriorated the low-temperature toughness because of the higher volume fraction of DUB with a large effective grain size. The specimen containing both Cu and B had the highest strength, but showed worse low-temperature toughness of higher ductile-brittle transition temperature (DBTT) and lower absorbed energy because it mostly consisted of LB and LM. In the B-added specimen, on the other hand, it was possible to obtain the best combination of high strength and good low-temperature toughness by decreasing the overall effective grain size via the appropriate formation of different low-temperature transformation products containing GB, DUB, and LB/LM.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권6호
• /
• pp.77-87
• /
• 2013

국내 교량 설계에서 온도 하중에 대한 현재 LSD (한계 상태 설계법)는 다양한 교량 형식에 대한 동일한 기준을 적용하고 있다. 본 연구에서는 유효 온도를 산정하기 위해 실제 크기의 상판이 없는 강상자형거더교 시험체를 제작하였다. 1년동안 강상자형거더교모형의 18개 지점에서 온도데이터를 측정하였다. 측정된 데이터를 바탕으로 대기 온도에 따른 교량단면내 유효 온도를 산정 하였다. 유로 코드의 유효 온도와 비교할 때 실측 유효온도의 결과는 매우 유사한 상관 관계를 보였다. 따라서, 본 데이터를 기반으로 산정 된 유효 온도는 국내 교량 설계에 온도 하중에 적합한 설계 기준을 제시하기 위한 기초 자료로 사용할 수 있다.

• Nuclear Engineering and Technology
• /
• 제56권9호
• /
• pp.3668-3685
• /
• 2024

The operation of a nuclear power plant relies on precalculated nuclear design predictions based on core calculations of various reactor states. The fuel temperature is a crucial factor in determining the reactor fuel behavior, but assessing the temperature variation in a fuel pellet taking into account neutron transport is challenging. Detailed simulation of the temperature behavior within the fuel pellet can be obtained by coupling of Monte Carlo neutron transport codes with thermal-hydraulics solvers. However, this approach is not practical for standard nuclear design calculations, and computationally cheaper and faster methods must be used. In nuclear core simulators, a concept of a single "effective temperature" that yields the same neutron response as in the case of the actual temperature shape is mainly applied. This paper evaluates various fuel temperature models used in nuclear core simulation calculations, ultimately recommending a new effective temperature model that considers the burnup correction.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.220-225
• /
• 2008

Cylindrical stainless-steel/sodium heat pipe for a high-temperature solar thermal application was manufactured and tested for transient and steady-state operations. Two layers of stainless-steel screen mesh wick was inserted as a capillary structure. The outer diameter of the heat pipe was 12.7 mm and the total length was 250 mm. The effective heat transport length, the thermal load, and the operating temperature were varied as thermal transport conditions of the heat pipe. The thermal load was supplied by an electric furnace up to 1kW and the cooling was performed by forced convection of air The effective thermal conductivity and the thermal resistance were investigated as a function of heat flux, heat transport length, and vapor temperature. Typical range of the total effective thermal conductivity was as low as 43,500 W/m K for heat flux of 176.4 kW/$m^2$ and of operating temperature of 1000 K.

• 한국태양에너지학회 논문집
• /
• 제30권5호
• /
• pp.100-106
• /
• 2010

The purpose of this study is to predict the effective sky temperature on Osan City during the summer. The north latitude, east longitude of Osan City is $37^{\circ}06'$ and $127^{\circ}02'$. The altitude from the sea level is 48m. Empirical relations of the effective sky temperature suggested by Duffie and Beckman are compared on clear days. For the effective sky temperature prediction, data measured by the Korea Meteorological Administration is used as an input to the Bliss model. Both Hottel and Krondratyev model are used to calculate the water vapor emissivity. The results using Hottel's model match well with the empirical relation proposed by Bliss. The results show maximum, minimum, and average values depending on water vapor emissivity model. The maximum deviation is about 10K and is due to total emissivity model.

• Journal of Astronomy and Space Sciences
• /
• 제15권2호
• /
• pp.321-333
• /
• 1998

자외선 영역에서 별의 색 지수와 유효온도와의 상관관계를 구하기 위해서 118개의 IUE(Inter-national Ultraviolet Explorer) 표준성에 대해서 유효온도와 자외선 영역에서의 색 지수를 구하였다. 별의 유효온도는 IUE 저 분산 스펙트럼을 차등 보정 법을 이용하여 Kurucz 대기모델(1993)에 fitting하여 구하였고, 자외선 영역에서의 색 지수는 2750 $\AA$과 2950 $\AA$에서의 등급 차이로 정의하였다. Kurucz 대기모델(1993) fitting으로 구한 온도는 다른 논문(Malagnini & Morossi 1990, Malagnini et al. 1986)에서 구한 온도와 낮은 온도의 낮은 온도의 별을 제외하고 대체로 비슷하였으며, 자외선영역에서의 색 지수와 유효온동의 상관계 또한 Kurucz 대기모델에서의 결과와 비슷하게 나타났다.

• 태양에너지
• /
• 제8권2호
• /
• pp.46-56
• /
• 1988

This investigation concerns thermal stratification of the water due to the temperature difference (${\Delta}T=T_{\infty}-T_i$) between the mean temperature of the water in the test tank (1m wide, 1m high, 2.1m long) and the temperature of the inflow water into the tank; flow rate of circulating water and height of the sink diffuser in the test tank. The additional objectives was to observe a stratification phenomena near an interface by measuring the velosities and the temperature difference and investigate an availabilities of the better effective hot water through establishing thermocline near an interface around the bottom of the tank. Following results were obtained through the experiments. 1. When the flow rate was constant and the temperature difference (${\Delta}T=T_{\infty}-T_i$) between the mean temperature of the flow in the test tank and the temperature of the inflow water increased by 5.6, 9.5, 13.5($^{\circ}C$), obtained the better effective advantage of hot water and the stress near an interface increased gradually. 2. When the ${\Delta}T=T_{\infty}-T_i$ was constant and flow rate increased by 4.0, 4.8, 6.4, 8.0 (LPM), obtained the better effective advent age of hot water and the mean stress near an interface increased gradually. 3. When the height of the sink diffuser was 25cm from tank bottom in comparison with 50cm, obtained the better effective advantage of hot water and the mean stress near an interface increased.