• 제목/요약/키워드: Effective discharge

검색결과 1,007건 처리시간 0.032초

장치형 비점오염원 저감시설의 여과 및 역세 효율 평가 (Evaluation of Filtration and Backwash Efficiency of Non-point Source Pollution Reduction Facility)

  • 윤상린;이용재;안재환;최원석;이정우;오혜철;김석구
    • 대한환경공학회지
    • /
    • 제39권12호
    • /
    • pp.664-671
    • /
    • 2017
  • 비점오염원은 도시, 도로, 농지, 산지, 공사장 등 불특정장소에서 불특정하게 수계에 오염물질을 배출하는 배출원으로, 오염물질의 유출경로가 명확하게 구분되지 않는다. 또한 수집이 어렵고 배출량이 강수량 등 기상조건에 크게 좌우되기 때문에 저감시설의 설계 및 유지관리가 어려운 측면이 있다. 한국의 경우 2006년 이후 비점오염원 처리에 대한 중요성이 심화되어 설치의무는 강화되고 있으나, 설치기준 및 효율에 대한 명확한 기준이 제시되지 못하여 단순히 저렴하며 유지관리가 필요치 않은 처리기술을 선호하고 있는 실정이었다. 본 연구는 발포고분자여재(Expended Polypropylene Media, EPP)를 이용한 여과형 비점오염원 저감시설에 대하여 처리능과 역세척에 의한 처리능의 유지에 대한 연구를 진행하였다. 여재층 높이가 증가할수록 처리효율의 변화폭은 줄었으며, 처리효율은 상승하는 것으로 나타났다. 60 cm의 여재층 높이에서 10 m/hr의 선속도의 경우 평균 처리효율은 94%로 나타났으며, 20 m/hr의 선속도의 경우 평균 처리효율이 90%로 나타났다. 여과 선속도 10 m/hr와 20 m/hr에서 180분 동안 운전 결과, 손실수두의 변화는 여재층 높이에 따른 차이가 조금 다른 양상으로 나타났다. 총 3회 반복한 역세척 실험 동안 여과시간이 경과함에 따라 처리효율은 여재가 폐색됨에 따라 감소하는 경향을 나타났다. 그러나 역세척 과정 이후에는 이전 여과과정의 초기 시점의 처리효율과 거의 유사하게 회복하는 것으로 확인하였다.

금속산화물 촉매상에서 플라즈마를 이용한 IPA 저감 (Plasma-assisted Catalysis for the Abatement of Isopropyl Alcohol over Metal Oxides)

  • 조진오;이상백;장동룡;박종호;목영선
    • 청정기술
    • /
    • 제20권4호
    • /
    • pp.375-382
    • /
    • 2014
  • 금속산화물이 담지된 허니컴 형상의 플라즈마-촉매 반응기를 이용하여 아이소프로필 알코올(isopropyl alcohol, IPA) 저감 및 부산물 생성 거동에 대해 조사하였다. 허니컴 형상의 다공질 세라믹 지지체(주성분: ${\alpha}-Al_2O_3$)에 금속산화물로 산화철($Fe_2O_3$) 또는 산화구리(CuO)를 담지시킨 후, 이 촉매가 동축 원통형 전극구조 내부에 위치하도록 플라즈마-촉매 반응기를 구성하였다. 플라즈마 반응에 의한 IPA 분해속도가 매우 빨랐기 때문에 IPA 분해효율 자체는 금속산화물 담지 여부 및 금속산화물 종류에 관계없이 유사한 것으로 나타났으나, 부산물 생성거동은 촉매종류에 따라 큰 차이를 보여주었다. 아세톤, 폼알데하이드, 아세트알데하이드, 메테인, 일산화탄소 등의 유해 부산물 농도는 $Fe_2O_3/{\alpha}-Al_2O_3$ < $CuO/{\alpha}-Al_2O_3$ < ${\alpha}-Al_2O_3$ 순으로 높게 나타났다. 유량 $1L\;min^{-1}$, IPA 초기농도 5,000 ppm(산소: 10%), 방전전력 47 W의 조건에서 얻어진 $CO_2$ 선택도는 ${\alpha}-Al_2O_3$, $CuO/{\alpha}-Al_2O_3$, $Fe_2O_3/{\alpha}-Al_2O_3$에 대해 각각 40, 80, 95%로서 $Fe_2O_3/{\alpha}-Al_2O_3$가 플라즈마-촉매를 이용한 IPA의 산화에 가장 효과적인 것으로 나타났다. 플라즈마를 단독으로 사용하여 휘발성유기화합물을 분해할 경우 타르형태의 생성물이 반응기에 퇴적되는 문제점이 있으나, 플라즈마-촉매 공정에서는 이러한 현상이 관찰되지 않았으며 촉매의 활성이 그대로 유지되었다.

Minilaparotomy 불임술(不妊術)과 복강경불임술(腹腔鏡不妊術)에 관(關)한 비교연구(比較硏究) (A Comparison of Minilaparotomy and Laparoscopic Sterilization)

  • 배병주
    • Clinical and Experimental Reproductive Medicine
    • /
    • 제4권1호
    • /
    • pp.17-25
    • /
    • 1977
  • Anderson(1937), Power and Barnes(1941) reported a study concerning a method of tubal sterilization in association with peritoneoscopy or laparoscopy in which they cauterized the tubes. There appears to have been a hiatus of interest in sterilization (cold or hot) associated with laparoscopy until reintroduction by Palmer(1963), Frangenheim(1964) and Steptoe(1967). On the other hand, for interval female sterilization, however, minilaparotomy is relatively new. By Saunder and Munsick(1972), John Lyle(1974), Frank Stubb(1974), Vitoon(1973) and B.C. Bai(1975), their own technique for interval female sterilization requires 2.0 to 2.5cm, incision at the margin of the mons pubis. In Korea, female sterilization by means of minilaparotomy firstly reported by B.C. Bai using Bai's uterine elevator, of his own device, early in 1975. Recently inteval female sterilization by laparoscopy and minilaparotomy are widely accepted throughout the world especially in Asian countries. Minilaparotomy is carried out from 1974, laparoscopic sterilization from 1976, and in this study each of 250 cases of those were analysed and discussed for the comparison at Seoul Red Cross Hospital. (1) In the age distribution, numerous clients were in their age of $31{\sim}35$ in laparoscopy as well as minilaparotomy. Average 33.7 years in L and 33.2 years in M. (M=minilaparotomy, L=laparoscopic sterilization) (2) As regarding living children, women having 3 children represented the greatest number, 113 cases out of 250 in M group and 102 cases out of 250 in L group. Average No. of child are 2.9 in Land 3.1 in M. (3) Concidering the operation day in the menstrml cycle, the greatest number of cases, those who underwent tubal sterilization during the days of $26{\sim}$, next during the $6{\sim}10$ days of the cycle in both group. (4) Concidering the operation time, 188 cases by laparoscopy were performed in $6{\sim}10$ minutes, 33 cases within 5 minutes and 24 cases in $11{\sim}15$ minutes. Maximum 50 minutes, minimum 4 minutes and average 8.3 minutes. The majority of cases (154 cases) by minilaparotomy required $6{\sim}10$ minutes and 67 cases $11{\sim}15$ minutes, 6 cases within 5 minutes. Maximum 30 minutes, minimum 4 minutes and average 10.4, minutes. In both groups, most of the reasons for the extra length were surgical difficulties such as thick abdominal wall, pelvic adhesion, less cooperation of patients in early period of this study. (5) Hospital stay after operation in L group required $3{\sim}4$ hours in 125 cases, $2{\sim}3$ hours in 41 cases, $4{\sim}5$ hours in 32 cases out of 250. Maximum 8 hours, minimum 1 hour and average 3.8 hours. In M group hospital stay required $6{\sim}7$ hours in 100 cases, over 7 hours in 85 cases, $5{\sim}6$ hours in 46 cases and so on. Maximum 14 hours, minimum 2 hours and average 6.5 hours. (6) The time between operation and gas passing in the majority cases of both groups, were $12{\sim}36$ hours. A veragetime 20.3 hours in L and 27.2 in M. (7) Laparoscopic sterilization coincident with induced abortion were carried out in 27 cases, laparoscopy with minilaparotomy to control for mesosalpingeal hemorrhage in 1 case. Minilaparotomy coincident with induced abortion were performed in 65 cases, D and C whit polypectomy, menstrual regulatian, and remaval of IUD in 1 case respectively. (8) In L group, 1 case of mesosalpingeal hemorrhage, 1 case of abdominal wall infection were complicated during operation. In M group, 1 case of uterine perfaration, 1 case of abdominal wall infection, 1 case of hemorrhage from omentum and 1 case of bloody vaginal discharge were complicated. No intensive medical treatment was required for those minor complications in both groups. (9) No failure has been recognized and these two sterilization techniques might be the simple, safe and the most effective method for permanent contraception at present time. There is no significant clinical defference between L and M group in this study.

  • PDF

독립 호우사상에 대한 이변량 강우빈도해석 및 강우-유출해석 (Bivariate Rainfall Frequency Analysis and Rainfall-runoff Analysis for Independent Rainfall Events)

  • 박철순;유철상;전창현
    • 한국수자원학회논문집
    • /
    • 제45권7호
    • /
    • pp.713-727
    • /
    • 2012
  • 본 연구에서는 독립 호우사상을 이용하여 이변량 빈도해석 및 유출해석을 수행하고, 이를 기존 단변량 빈도해석 결과와 비교 평가하였다. 본 연구는 규모가 다른 중랑천, 청계천, 우이천유역 등 세 유역에 대해 수행되었다. 유출모형으로 Clark 모형을 이용하였고, 유효우량은 SCS 방법을 적용하여 계산하였다. 강우의 시간분포 모형으로 교호블록 방법 및 Huff 방법을 적용하여 그 결과가 비교될 수 있도록 하였다. 그 결과를 정리하면 다음과 같다. (1) 연최대치 독립 호우사상계열의 이변량 빈도해석 결과, 지속기간이 짧은 경우에는 단변량 빈도해석 결과와의 차이가 매우 크나 지속기간이 길어짊에 따라서 그 차이가 현저히 줄어드는 것으로 나타났다. 아울러 지속기간이 짧은 경우, 단변량 빈도해석 결과가 이변량 빈도해석 결과보다 더욱 크게 나타났으나 특정 지속기간 이상부터 그 결과가 역전되는 것으로 나타났다. (2) 교호블록 시간분포 방법을 적용하는 경우가 Huff 방법을 적용한 경우보다 더욱 큰 첨두유출량을 발생시키는 것으로 나타났다. 아울러 교호블록 방법을 적용하는 경우에는 강우 지속기간의 증가에 따라서 첨두유출량이 점차 증가하는 것으로 나타났으나, 강우 지속기간이 대략 24시간 정도 되었을 때 그 값이 거의 수렴하는 것으로 나타났다. (3) 중랑천 유역에 대해 Huff 방법을 적용하여 유출해석을 수행한 결과에서는 이변량 설계강우를 적용한 경우가 단변량 설계강우를 적용한 경우보다 더욱 큰 홍수량을 발생시키는 것으로 나타났다. 반면에 청계천 및 우이천 유역의 경우에는 이변량 설계강우를 적용한 경우보다 단변량 설계강우를 적용한 경우의 홍수량이 다소 큰 것으로 나타났다. 그러나 교호블록 방법을 적용한 경우에서는 모든 유역에 대해 이변량 설계강우를 적용한 경우가 단변량 설계강우를 적용한 경우보다 큰 홍수량을 발생시키는 것으로 나타났다.

XML 기반의 에너지 저장용 프로파일 어댑터 분석 및 설계 (Analysis and Design of Profiling Adaptor for XML based Energy Storage System)

  • 우용제;박재홍;강민구;권기원
    • 인터넷정보학회논문지
    • /
    • 제16권5호
    • /
    • pp.29-38
    • /
    • 2015
  • 에너지 저장장치(Energy Storage System)은 전력 수요가 적을 때 전력을 저장해 두었다가 수요가 발생하거나 비상시 저장된 전력을 사용함으로 전기 에너지를 저장하여 필요할 때 사용 가능함으로써 에너지 이용 효율 향상, 전력공급 시스템 안정화 및 신재생 에너지 활용도 향상 효과를 가지는 시스템이다. 최근 세계적으로 에너지의 효율적인 소비에 대한 관심이 증대되면서 전력의 안정적인 공급을 원하는 수요자와 전력 수요 평준화를 원하는 공급자의 요구를 충족시켜줄 수 있는 에너지 저장장치의 필요성이 증대되고 있다. 현재 에너지 저장장치를 구성하는 Power Conditioning System(PCS), Battery Management System(BMS), 배터리 셀은 제조사별로 상이한 규격을 가진다. 이로 인해 각 핵심 부품 간 인터페이스가 규격화되어 있지 않아, 에너지 저장장치의 구성 및 운영에 난점으로 작용하고 있다. 본 논문에서는 제조사별로 상이한 특징을 가지는 부품들의 설정과 효율적 운영에 필요한 정보를 수용하여 에너지 저장장치를 구성할 수 있는 XML 기반의 에너지 시스템 전용 프로파일 시스템의 설계와 분석방안을 제안한다. 제조사별 PCS, BMS, 배터리 셀과 그 외의 주변 기기들의 설정 정보 및 운영 정보를 분석하여 프로파일 규격을 정의하고, 에너지 저장장치에 적용할 수 있는 프로파일 어댑터 소프트웨어를 설계 및 구현한다. 프로파일 어댑터를 통해 생성된 프로파일은 설정 프로파일과 운영 프로파일로 구성되며, 추후 확장성을 고려하여 표준 XML의 규격을 따른다. 구현된 프로파일 시스템의 검증은 에너지 저장장치 시스템에 적용되어 기본적인 충 방전 동작을 통해 정상 동작 결과를 제안한다.

남·북한강과 경안천 합류 수역 팔당호의 수질 변동성에 대한 기상·수문학적 영향 (Hydro-meteorological Effects on Water Quality Variability in Paldang Reservoir, Confluent Area of the South-Han River-North-Han River-Gyeongan Stream, Korea)

  • 황순진;김건희;박채홍;서완범;최봉근;엄현수;박명환;노혜란;심연보;신재기
    • 생태와환경
    • /
    • 제49권4호
    • /
    • pp.354-374
    • /
    • 2016
  • 본 연구는 2012년 5월부터 2015년 12월까지 북한강과 남한강의 유입부를 포함하는 팔당호의 5개 지점에서 시공간적 수질 변동성을 강우 수문학과 비교 고찰하였다. 조사기간 동안 기초 수질요인들의 변동은 계절적 영향이 컸다. 특히, 수온성층은 수심이 깊은 댐 부근에서 형성되었고, 연도에 따라 빈산소 장기화도 관찰되었다. 질소(N) 계열 영양염의 증가는 유량이 빈약할 때 나타났고, 이때 $NH_4$는 하수 처리수의 영향을 크게 받아 $NO_3$와 상반되는 경향을 나타내었다. 인(P)의 증가는 유량이 크거나 극심한 가뭄이 지속될 때이었고, P 영양염 결핍도 빈번하게 관찰되었다. Chl-a의 증감은 유량 변동과 역상관 관계를 보였고, 그 값이 높을 때 AGP 값은 낮았다. 팔당호의 수질 변동성은 유역으로부터 하수 처리수(총량: $472{\times}10^3m^3d^{-1}$)의 오염원을 기반으로 한 유입, 방류 및 취수의 패턴에서 직간접적 관련성과 그 영향을 찾을 수 있었다. 또한 수질의 시공간적 변동 과정에서 기상(장마, 태풍, 이상강우 및 폭염더위) 수문(유량과 수위)학적 인자는 펄스, 희석, 역류, 흡수, 농축 및 침전 등 형태로서 작용하였다. 하천형 저수지인 팔당호의 수질 변동은 매우 역동적이며, 국내 최대 상수원의 오염 수준을 경감하기 위한 실효 대책으로 기상 수문에 기초한 육수학적 조사연구와 P-free 하수 처리 정책 실현의 필요성을 제안한다.

설비공학회 분야의 최근 연구 동향 : 2015년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research : A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2015)

  • 이대영;김사량;김현정;김동선;박준석;임병찬
    • 설비공학논문집
    • /
    • 제28권6호
    • /
    • pp.256-268
    • /
    • 2016
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2015. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering were carried out in the areas of flow, heat and mass transfer, cooling and heating, and air-conditioning, the renewable energy system and the flow inside building rooms. Research issues dealing with air-conditioning machines and fire and exhausting smoke were reduced. CFD seems to be spreading to more research areas. (2) Research works on heat transfer area were carried out in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the economic analysis of GHG emission, micro channel heat exchanger, effect of rib angle on thermal performance, the airside performance of fin-and-tube heat exchangers, theoretical analysis of a rotary heat exchanger, heat exchanger in a cryogenic environment, the performance of a cross-flow-type, indirect evaporative cooler made of paper/plastic film. In the area of pool boiling and condensing, the bubble jet loop heat pipe was studied. In the area of industrial heat exchangers, researches were performed on fin-tube heat exchanger, KSTAR PFC and vacuum vessel at baking phase, the performance of small-sized dehumidification rotor, design of gas-injection port of an asymmetric scroll compressor, effect of slot discharge-angle change on exhaust efficiency of range hood system with air curtain. (3) In the field of refrigeration, various studies were carried in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, a cold-climate heat pump system, $CO_2$ cascade systems, ejector cycles and a PCM-based continuous heating system were investigated. In the alternative refrigeration/energy system category, a polymer adsorption heat pump, an alcohol absorption heat pump and a desiccant-based hybrid refrigeration system were investigated. In the system control category, turbo-refrigerator capacity controls and an absorption chiller fault diagnostics were investigated. (4) In building mechanical system research fields, eighteen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the user and location awareness technology applied dimming lighting control system, the lighting performance evaluation for light-shelves, the improvement evaluation of air quality through analysis of ventilation efficiency and the evaluation of airtightness of sliding and LS window systems. The subjects of building energy were worked on the energy saving estimation of existing buildings, the developing model to predict heating energy usage in domestic city area and the performance evaluation of cooling applied with economizer control. The studies were also performed related to the experimental measurement of weight variation and thermal conductivity in polyurethane foam, the development of flame spread prevention system for sandwich panels, the utilization of heat from waste-incineration facility in large-scale horticultural facilities.

이화학적 특성과 질소 안정동위원소비를 활용한 강우시 가축사육 밀집 지역의 하천 수질 영향 평가 (River Water Quality Impact Assessment in an Intensive Livestock Farming Area During Rainfall Event using Physicochemical characteristics and Nitrogen Stable Isotopes)

  • 류홍덕;백운일;김선정;김덕우;김찬식;김민섭;신동석;이재관;정유진
    • 한국환경과학회지
    • /
    • 제28권1호
    • /
    • pp.7-18
    • /
    • 2019
  • This study aimed to assess the impact of livestock excreta discharged from an Intensive Livestock Farming Area (ILFA) on river water quality during a rainfall event. The Bangcho River, which is one of the 7 tributaries in the Cheongmi River watershed, was the study site. The Cheongmi River watershed is the second largest area for livestock excreta discharge in Korea. Our results clearly showed that, during the rainfall event, the water quality of the Bangcho River was severely deteriorated due to the COD, $NH_4-N$, T-N, $PO_4-P$, T-P, and heavy metals (Cu, Zn, and Mn) in the run-off from nearby farmlands, where the soil comprised composted manure and unmanaged livestock excreta. In addition, stable isotope analysis revealed that most of nitrogen ($NH_4-N$ and $NO_3-N$) in the run-off was from the ammonium and nitrate in the livestock excreta. The values of ${\delta}^{15}N_{NH4}$ and ${\delta}^{15}N_{NO3}$ for the Bangcho River water sample, which was obtained from the downstream of mixing zone for run-off water, were lower than those for the run-off water. This indicates that there were other nitrogen sources upstream river in the river. It was assumed from ${\delta}^{15}N_{NH4}$ and ${\delta}^{15}N_{NO3}$ stable isotope analyses that these other nitrogen sources were naturally occurring soil nitrogen, nitrogen from chemical fertilizers, sewage, and livestock excreta. Therefore, the use of physicochemical characteristics and nitrogen stable isotopes in the water quality impact assessment enabled more effective analysis of nitrogen pollution from an ILFA during rainfall events.

영양집중지원팀 자문 의뢰 및 순응 여부에 따른 중환자실 환자의 영양상태 비교 (Nutritional Status of Intensive Care Unit Patients According to the Referral to the Nutrition Support Team and Compliance with the Recommendations)

  • 손윤진;현태선
    • 대한지역사회영양학회지
    • /
    • 제27권2호
    • /
    • pp.121-131
    • /
    • 2022
  • 본 연구에서는 충북대학교병원 NST의 중재활동 효과를 확인하기 위하여 중환자실에 7일 이상 입원하여 EN/PN을 공급 받은 성인 환자 176명을 대상으로 의무기록을 후향적으로 분석하였다. NST 자문 의뢰 여부에 따라 NST 의뢰군과 미의뢰군으로 분류하였고, NST 의뢰군은 자문순응 여부에 따라 자문순응군과 비순응군으로 분류하였다. NST 의뢰율은 56.8%, NST 자문 회신에 대한 순응율은 47.0%이었으며, 신경과의 NST 의뢰율이 93.8%로 가장 높았고, 자문순응 비율도 60%로 높았다. 진료과 및 주진단명에 따라 NST 의뢰율과 자문순응 비율에 큰 차이를 나타냈다. NST 의뢰군은 미의뢰군에 비해, 자문순응군은 비순응군에 비해 열량 및 단백질 공급률이 높았으며, 목표열량 도달 비율이 높았다. 또한 자문순응군은 비순응군에 비해 목표열량에 도달하는 기간도 유의적으로 짧았다. 중환자실 입실 시 보다 퇴실 시 영양상태가 전반적으로 악화된 것으로 나타났으며, 모든 집단에서 혈청 알부민과 헤모글로 빈 수치가 유의적으로 낮아졌으나, 자문순응군의 감소폭은 자문비순응군의 감소폭보다 적었다. 또한 퇴실 시 NST 의뢰군, 비의뢰군, 자문비순응군의 심한 영양불량은 입실 시에 비해 유의적으로 증가하였으나, 자문순응군은 입실 시와 퇴실 시에 차이가 없었다. 중환자실 재원기간은 NST 의뢰군이 미의뢰군보다 더 길었으나 자문순응군은 비순응군보다 유의적으로 짧게 나타났다. 결과적으로 NST 자문에 순응하여 제공된 영양지원은 중환자의 생화학적 지표에 긍정적인 효과를 나타내고, 재원기간 중 발생할 수 있는 영양불량을 지연시키고, 중환자실 재원 기간 또한 유의하게 단축시키는 것으로 나타났다. 따라서 NST 자문에 대한 순응률을 증가시키기 위해 중환자실 의료진과 NST와의 효과적인 의사소통이 필요할 것으로 생각되며, 중환자실 입실 초기부터 NST에 의한 중재활동이 진행될 수 있도록 자문 의뢰시스템의 개선이 필요할 것으로 생각된다. 또한 적절한 영양공급의 중요성 및 필요성에 대한 의료진 대상의 교육을 지속적으로 시행하여 영양공급 및 지원절차에 대한 프로토콜이 정착되어야 할 것으로 생각된다.

관절경적 활액막 절제술 후 후격막 삽입구를 통한 배액관의 후방 거치를 이용한 무릎의 화농성 관절염 치료 (Treatment of Pyogenic Arthritis of the Knee Using Drainage Tube Insertion in the Posterior Compartment through the Posterior Transeptal Portal after an Arthroscopic Synovectomy)

  • 김태호;유창은;신충식
    • 대한정형외과학회지
    • /
    • 제54권3호
    • /
    • pp.269-275
    • /
    • 2019
  • 목적: 화농성 슬관절염의 관절경적 활액막 절제 및 후격막 절제 후 후내측 부위에 배액관 삽입 후 치료 효과를 분석하였다. 대상 및 방법: 2005년 6월부터 2016년 12월까지 화농성 관절염으로 진단된 56예(55명, 양측 1예)를 대상으로 하였다. 원인균이 동정된 환자는 14명(25.0%)이었다. 평균 추시 기간은 12.3개월이었고 평균 나이는 67.8세였다. 이 중 남성은 24명, 여성은 31명이었다. Kellgren-Lawrence 등급 I은 6예, II는 20예, III는 11예, IV는 18예였다. 수술방법은 총 6개의 삽입구를 통하여 변연 절제술을 시행하였고 후격막을 절제한 후 배액관을 후내측 삽입구에서 관절내 후외측까지 삽입하여 수술을 마무리하였다. 수술 후 기능적 평가로 Lysholm score를 사용하였고, 방사선학적 평가로 내원 당시와 최종 추시 시의 Kellgren-Lawrence 등급을 비교하였다. 결과: C-반응성 단백의 정상화 기간은 평균 59.8일(6-164일)이었다. 정맥 항생제는 평균 37.1일 동안 사용되었다. 기능평가를 통한 결과에서는 Lysholm score상 평균 64.5점(30-98점)이었다. 총 2예에서 재발하였는데 동일한 방법으로 한 차례 재수술하였으며 모든 환자에서 치료가 완료되었다. 수술 당시와 마지막 추시 시의 Kellgren-Lawrence 등급은 유의한 차이가 없었다(p>0.05). 결론: 화농성 슬관절염에서 관절경적 변연 절제술 후에 부가적으로 후격막을 부분 절제하고 배액관을 후방에 위치시키는 술식은 적절한 삼출물 배출을 유도하여 만족스러운 결과를 얻을 수 있어 고려해 볼만한 치료 방법 중의 하나로 생각된다.