• 한국해안해양공학회지
• /
• 제2권2호
• /
• pp.75-82
• /
• 1990

파고, 주기의 정보로서 수위변동η, 그 시간적분법η, 파향의 정보로서 수평방향 2성분 물입자속도 u, v의 4가지 시계열을 판정하여, narrow band-width frequency spectrum을 가지는 불규칙파의 포락파형(enveloped wave)을 구함으로서, 파고, 주기, 파향의 종합확률분포를 상세히 유도하여, 현지실측경과와 비교, 검토했다. 그 결과, 실측되어진 종합확률분포는 유도되어진 파고, 주기, 파향의 결합확률분포와 양호하게 일치하여 현지 불규칙파랑장에 있어서 충분한 정도로서 적용할 수 있다는 것을 알았다.

• 환경영향평가
• /
• 제9권3호
• /
• pp.239-248
• /
• 2000

The aggravating water quality from the expansion of industrialization along with increasing population lead to develop more intensive physical measures to secure better drinking water quality. This study was mainly initiated to establish a water-pollutant buffering zone for the upper stream basin of Paldang--the major source area of drinking water for the metropolitan Seoul and suburban areas with a population more than 13 million. Two different criteria were considered in determining the buffering distance from the edge of the streamflow : 1km-width buffer zone for the special protection area which has been strictly controlled by the conventional laws for the protection of drinking water supply, and 500m-width buffer zone for the rest of the area. To delineate the exact boundaries of the water-pollutant buffering zone, GIS database was created integrating topography, hydrography, cadastral, and other related layers. The newly designated water-pollutant buffering zone would contribute to improve the water quality in a long term along with the conservation of the wet land. More study, however, should be made within the water-pollutant buffering zone such as the detailed survey of the pollutants, vegetation, and ecosystem for more effective management of the buffering zone.

• Agribusiness and Information Management
• /
• 제7권1호
• /
• pp.1-9
• /
• 2015

The purpose of this study is to develop a growth prediction model that can predict growth and development information influencing the production of citrus fruits: the growth model algorithm that can predict floral leaf ratio, number of fruit sets, fruit width, and overweight depending on the main period of growth and development with consideration of the applied weather factors. Every year, large scale of manpower was mobilized to investigate the production of outdoor-grown citrus fruits, but it was limited to recycling the data without an observation supporting system to systemize the database. This study intends to create a systematical database based on the basic data obtained through the observation supporting system in application of an algorithm according to the accumulated long term data and prepare a base for its continuous improvement and development. The importance of the observed data is increasingly recognized every year, and the citrus fruit observation supporting system is important for utilizing an effective policy and decision making according to various applications and analysis results through an interconnection and an integration of the investigated statistical data. The citrus fruit is a representative crop having a great ripple effect in Jeju agriculture. An early prediction of the growth and development information influencing the production of citrus fruits may be helpful for decision making in supply and demand control of agricultural products.

• 한국재료학회지
• /
• 제30권3호
• /
• pp.149-154
• /
• 2020

A powder-in-sheath rolling method is applied to the fabrication of a carbon nano tube (CNT) reinforced copper composite. A copper tube with outer diameter of 30 mm and wall thickness of 2 mm is used as sheath material. A mixture of pure copper powder and CNTs with a volume content of 3 % is filled in a tube by tap filling and then processed to an 93.3 % reduction using multi-pass rolling after heating for 0.5 h at 400 ℃. The specimen is then sintered for 1h at 500 ℃. The relative density of the 3 vol%CNT/Cu composite fabricated using powder in sheath rolling is 98 %, while that of the Cu powder compact is 99 %. The microstructure is somewhat heterogeneous in width direction in the composite, but is relatively homogeneous in the Cu powder compact. The hardness distribution is also ununiform in the width direction for the composite. The average hardness of the composites is higher by 8Hv than that of Cu powder compact. The tensile strength of the composite is 280 MPa, which is 20 MPa higher than that of the Cu powder compact. It is concluded that the powder in sheath rolling method is an effective process for fabrication of sound CNT reinforced Cu matrix composites.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권5호
• /
• pp.568-576
• /
• 2017

With an increase in the usage of LNG, there is a heightened interest about its safety aspects regarding the explosion of LNG carrier tank. The need for a cryogenic explosion-proof camera has increased. The camera has to work in cryogenic environment (below $-160^{\circ}C$) in LNG carrier. This study conducted design and heat transfer analysis of cryogenic camera to secure working time in limitation of heat source. The design with gap width of double pane windows was conducted based on simple vertical cavity model to insulate from cryogenic environment. The optimal gap width was 12.5 mm. For effective analysis considering convection within the camera, equivalent thermal conductivity method was adopted with ABAQUS. The working time of the camera predicted was over 10 h at warm-start condition. In cold-start condition, it required about 5 h of pre-warming time to work. The results of analysis were compared with the ones of the actual cryogenic test.

• 반도체디스플레이기술학회지
• /
• 제19권3호
• /
• pp.30-35
• /
• 2020

A microlens has been fabricated by various methods such as a thermal reflow, hot embossing, diamond milling, etc. However, these methods require a relatively complex process to control the microlens shape. In this work, we report on a simple and cost-effective method to fabricate a cylindrical microlens (CML), which can diffuse light widely. We have employed a slot-die head with the dual plate (a meniscus guide with a protruded μ-tip and a shim with a slit channel) for coating of a narrow stripe using poly(methyl methacrylate) (PMMA). We have shown that the higher the coating gap, the lower the maximum coating speed, which causes an increase in the stripe width and thickness. The coated PMMA stripe has the concave shape. To make it in the shape of a convex microlens, we have applied the thermal reflow method. When the stripe thickness is small, however, its effect is negligible. To increase the stripe thickness, we have increased the number of repeated coating. With this scheme, we have fabricated the CML with the width of 223 ㎛ and the thickness of 7.3 ㎛. Finally, we have demonstrated experimentally that the CML can diffuse light widely, a feature demanded for light extraction efficiency of organic light-emitting diodes (OLEDs) and suppression of moiré patterns in displays.

• 설비공학논문집
• /
• 제20권4호
• /
• pp.238-244
• /
• 2008

This study investigates on the improvement of inhalation effect of hood which attached new device named as "gas-guide-device" in local exhaust ventilation system for the effective elimination of harmful material and dust in manufacturing factory. The gas-guide-device having a diamond shape is composed of width (b) and two sides of a device (X, Y) and its size is selected the industrial hood under application in manufacturing factory after due consideration. In order to investigate the effect of gas-guide-device, numerical and experimental study is performed that the flow velocity is calculated and is measured by a commercial program "COMSOL $Multiphysics^{TM}$" and a hot wire type of anemometer, respectively. The numerical and experimental results are revealed is a similar pattern and flow velocity has improved to hood attached gas-guide-device. Also, the numerical method and result is also verified the dependance. Moreover, the optimum shape and size of gas-guide-device is revealed that the width (b) and the ratio of two sides of gas-guide-device (X, Y) has 125mm and 4 to 6.

• 조명전기설비학회논문지
• /
• 제22권3호
• /
• pp.40-51
• /
• 2008

This research presents a new active auxiliary resonant snubber with for induction heating PWM high frequency inverter solving the problem of induction heating PWM high frequency inverter circuit which is using widely in the practical application of an induction heating apparatus, the soft switching operation and power control are impossible when the lowest power supply in the active auxiliary resonant snubber with for induction heating PWM high frequency inverter. The inverter circuit which is attempted by the on-off operation of a switch has the effect of reducing the power loss due to soft switching and high frequency switching. This confirms that power regulation is possible on a continuous basis from 0.25[kW] to 2.84[kW] where the duty factor(D) changes from 0.08 to 0.3 under zero current switching which operates by an asymmetrical pulse width modulating control. The power conversion efficiency is 95[%]. Due to these results, the active auxiliary resonant snubber for an induction heating PWM high frequency inverter is considered effective as a source of induction heating.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권4호
• /
• pp.169-175
• /
• 2001

Ozone has been widely applied to many industrial fields because of its strong oxidation power, Therefore, the studies have been carried out for the methods on an effective and high concentration ozone generation. The silent or surface discharge type ozone generators have been mainly used for high concentration ozone generation in many fields of applications. But these two types of ozone generators have shortcomings to be improved. In this study, the ozone generator which improved the shortcomings of above ozone generators was proposed and fabricated for the high concentration ozone generation. And the proposed ozone generator could generate the surface and barrier discharge simultaneously. For this purpose, a mesh type discharge electrode was proposed and studied as a function of the widths output maximum ozone concentration of 2.96[vol%] was obtained at 5.6[kV], 830[mA], for 0.3[mm] width and 0.8[mm] vacancy of the mesh electrode and gap spacing of 0.65[mm] respectively.

• 한방재활의학과학회지
• /
• 제20권3호
• /
• pp.93-107
• /
• 2010

Objectives : The purpose of this study was to assess the efficacy of Chuna and taping treatment in patients with genu varum. Methods : Twenty-seven patients(male:10, female:17) with genu varum were recruited in this study. Chuna treatment at pelvic, and taping treatment at both legs were applied to whole participants. Outcomes were assessed using Q-angle(Quadriceps angle, QA), tibiofemoral angle(TFA), width and length of lesser trochanter(LT), pelvic incidence(PI), pelvic(PT), sacral slope(SS), lumber lordosis angle(LLA), meridian-electromyography(MEMG), Korean western ontario and McMaster universities osteoarthritis index(KWOMAC), and distance of femoral intercondylar distance(ICD). Results : 1. QA, LT width and LT length in radiograph were significantly increased. 2. PI, SS, PT and TFA in radiograph were significantly decreased. 3. The left vastus medialis portion contraction of female was significantly decreased after treatment. 4. The left rectus femoris portion fatigue was significantly decreased after treatment in male subjects. 5. The vastus medialis portion fatigue was significantly decreased after treatment in female subjects. 6. The distance of femoral ICD was significantly decreased. Conclusions : This study showed that Chuna and taping treatment could be used as an effective method for the treatment of genu varum.