• Journal of agriculture & life science
• /
• v.51 no.2
• /
• pp.165-173
• /
• 2017

To evaluate performance of the experimental pick-up type pulse crop harvester for harvesting sprout bean, its pick-up and discharging grain loss ratios, grain quality such as whole grain ratio, damaged grain ratio, unthreshed grain, and foreign material ratio in grain tank, germination rate of threshed grain, and theoretical field capacity of the harvester were analyzed according to engine speeds of 2000, 2400 and 2800 rpm and harvesting speeds of 0.6, 1.0 and 1.4 m/s. It is considered that the harvester showed optimum performance at the engine speed of 2800 rpm and the harvesting speed of 1.0 m/s, and then average pick-up grain loss ratio of 2.7%, discharging grain loss ratio of 0.5%, whole grain ratio of 99.3%, damaged grain ratio of 0.2%, unthreshed grain ratio of 0.0%, foreign material ratio of 0.2%, and germination rate at 8 days after seeding of 72.8% were shown. It is considered that the harvester has lower grain loss and higher grain quality than the imported bean combines. And also as it could harvest 3 rows of cut and dried sprout bean crop width of which was about 2 m, its effective field capacity was estimated for about 50 a/h.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.3
• /
• pp.141-148
• /
• 2021

In this paper, we propose an algorithm of welding bead detection and evaluation using geodesic active contour algorithm and high pass filter with image processing technique. The algorithm uses histogram equalization and high pass filter as gaussian filter to improve contrast. The image processing techniques smoothens the welding beads reduce the noise on an image. Then, the algorithm detects the welding bead area by applying the geodesic active contour algorithm and morphological ooperation. It also applies the balloon force that either inflates in, or deflates out the evolving contour for a better segmentation. After that, we propose a method for determining the quality of welding bead using effective length and width of the detected bead. In the experiments, our algorithm achieved the highest recall, precision, F-measure and IOU as 0.9894, 0.9668, 0.9780, and 0.8957 respectively. We compared the proposed algorithm with the conventional algorithms to evaluate the performance of the proposed algorithm. The proposed algorithm achieved better performance compared to the conventional ones with a maximum computational time of 0.6 seconds for segmenting and evaluating one welding bead.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.4
• /
• pp.328-333
• /
• 1984

Variation in ploidy level of regenerated plants from rice anthers and effective diploidization methods of haploid plants were studied to obtain basic information in rice breeding through anther culture. In a total of 574 plants derived from anther culture using 14F$_1$ hybrids as materials, there were 49.7% haploids, 48.6% diploids and 1.7% polyploids, respectively. The frequency of haploids in Japonica/Indica crosses was 60.6%, and that of Japonica/Japonica crosses was 43.0% in average. Inclusion of 2.4-D or NAA as phytohormone may increase the frequency of haploids, but kinetin may increase the frequency of diploids. The rate of auto-diploidization by tiller separation of haploid plants showed 8.2% in average. The rate of diploidization by leaf-sheath injection of colchicine showed 18.8% in average. Morphological characters of haploids plants showed that 64.6% in culm length, 63.4% in panicle length, 68% in flag leaf length, and 74.4% in flag leaf width compared to diploid plants. These apparent morphological differences will contribute to identify the ploidy of plants derived from rice anther culture.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.50 no.2
• /
• pp.155-167
• /
• 2023

The aim of this study was to investigate the effects of slow maxillary expansion (SME) on the dentoalveolar, skeletal, upper airway, and maxillary sinus using cone-beam computed tomography (CBCT). Twenty-three orthodontic patients (mean age 8.93 ± 1.61 years) who were treated with maxillary expansion using banded hyrax in the Department of Pediatric Dentistry at Jeonbuk National University Dental Hospital were included. According to the expansion speed applied, they were divided into two groups: SME (12 subjects, mean age 8.92 ± 1.45 years) and rapid maxillary expansion (RME, 11 subjects, mean age 8.94 ± 1.84 years). CBCT were obtained before (T0) and after (T1) the treatment and were analyzed with InVivo5 software (Anatomage, San Jose, CA, USA). Descriptive statistics showed no significant differences between the two groups in age, sex, or skeletal maturity. There were significant increases in maxillary width at the dentoalveolar and skeletal levels for both groups. Upper airway volume revealed a significant increase of 38.59% in the SME group and 28.72% in the RME group. However, there was no significant difference between SME group and RME group in all measurements. This study suggested the efficacy of SME in growing patients. SME was effective in increasing not only dentoalveolar and skeletal measurements but also airway volume. Therefore, pediatric dentists should select an appropriate expansion method considering the physiological aspects of periodontal tissues and discomfort in growing children.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1247-1248
• /
• 2022

Due to rapid urbanization and population growth, it has become crucial to analyze the various volumes and characteristics of pedestrian pathways to understand the capacity and level of service (LOS) for pathways to promote a better walking environment. Different indicators have been developed to measure pedestrian volume. The pedestrian level of service (PLOS), tailored to analyze pedestrian pathways based on the concept of the LOS in transportation in the Highway Capacity Manual, has been widely used. PLOS is a measurement concept used to assess the quality of pedestrian facilities, from grade A (best condition) to grade F (worst condition), based on the flow rate, average speed, occupied space, and other parameters. Since the original PLOS approach has been criticized for producing idealistic results, several modified versions of PLOS have also been developed. One of these modified versions is perceived PLOS, which measures the LOS for pathways by considering pedestrians' awareness levels. However, this method relies on survey-based measurements, making it difficult to continuously deploy the technique to all the pathways. To measure PLOS more quantitatively and continuously, researchers have adopted computer vision technologies to automatically assess pedestrian flows and PLOS from CCTV videos. However, there are drawbacks even with this method because CCTVs cannot be installed everywhere, e.g., in alleyways. Recently, a technique to monitor bio-signals, such as electrodermal activity (EDA), through wearable sensors that can measure physiological responses to external stimuli (e.g., when another pedestrian passes), has gained popularity. It has the potential to continuously measure perceived PLOS. In their previous experiment, the authors of this study found that there were many significant EDA responses in crowded places when other pedestrians acting as external stimuli passed by. Therefore, we hypothesized that the EDA responses would be significantly higher in places where relatively more dynamic objects pass, i.e., in crowded areas with low PLOS levels (e.g., level F). To this end, the authors conducted an experiment to confirm the validity of EDA in inferring the perceived PLOS. The EDA of the subjects was measured and analyzed while watching both the real-world and virtually created videos with different pedestrian volumes in a laboratory environment. The results showed the possibility of inferring the amount of pedestrian volume on the pathways by measuring the physiological reactions of pedestrians. Through further validation, the research outcome is expected to be used for EDA-based continuous measurement of perceived PLOS at the alley level, which will facilitate modifying the existing walking environments, e.g., constructing pathways with appropriate effective width based on pedestrian volume. Future research will examine the validity of the integrated use of EDA and acceleration signals to increase the accuracy of inferring the perceived PLOS by capturing both physiological and behavioral reactions when walking in a crowded area.

• The Journal of Internal Korean Medicine
• /
• v.44 no.2
• /
• pp.167-177
• /
• 2023

Background: Pressure injuries are localized areas of damage to the skin and/or underlying tissue, usually over a bony prominence due to pressure. Cerebrovascular disease increases the risk of pressure injuries due to the immobility caused by physical paralysis. The general approach to managing a patient with pressure injuries should include pain relief, the treatment of the infection, optimizing nutritional intake, proper positioning, and contamination prevention. Nonetheless, the duration of treatment for pressure injuries varies from person to person. Case report: An 80-year-old female intracerebral hemorrhage patient developed a pressure injury. To improve the injury faster, a Radix Astragali pharmacoacupuncture solution was applied to the pressure sore. The pressure injury's width, length, and depth was assessed using a ruler, and the exudate amount and tissue types were assessed. The treatment was performed for 35 days. The rate at which the size of the pressure sore lessened increased since the Radix Astragali pharmacoacupuncture solution was applied to the pressure sore. In addition, the tissue type of the pressure injury improved, and the exudates decreased. There was no significant difference in the Pressure Ulcer Scale for Healing Tool 3.0, since the Radix Astragali pharmacoacupuncture solution was applied to the pressure injury. Conclusion: This clinical case study suggests that the Radix Astragali pharmacoacupuncture solution might be effective in speeding up the healing of pressure injuries.

• Physical Therapy Korea
• /
• v.29 no.2
• /
• pp.117-123
• /
• 2022

Background: Push-up are effective exercises for shoulder stability. Previous studies have documented the effects of support plane and hand position and width on muscle activities during a push-up. Objects: This study aimed to investigate the changes in muscle activities in the upper extremity when performing the standard and the knee-flexed push-up with different hand shapes. Methods: A total of twenty-six healthy males participated in this study. Three different hand shapes (finger abduction, finger adduction, and fists) and two types of push-up posture (standard and knee-flexed push-up) were set as the independent variables. Electrograms were used to measure the muscle activity of the upper trapezius (UT), triceps brachii (TB), pectoralis major (PM), and serratus anterior (SA). Each participant performed the randomly assigned push-up to the sound of the metronome. The mixed-effect linear regression model was used to detect the changes in muscle activities after changing the hand shape and push-up posture. Statistical significance was set at α = 0.05. Results: The UT muscle activity was statistically significantly higher when performing push-up with fists than finger abduction (p = 0.035) or finger adduction (p = 0.044). During the standard push-up, the muscle activity in all muscles was that the push-up with fists showed the highest muscle activity compared to the finger abduction (p < 0.01) and finger adduction (p < 0.01). Regardless of the shape of the hand, UT had the lowest muscle activity compared to other muscles (p < 0.001). In contrast, the SA muscle had the highest muscle activity among four muscles during the standard push-up. Conclusion: Based on the results of this study, we suggest hand shape is related to the difficulty level of push-up either in the standard or the knee-flexed push-up, especially in the push-up with fists. In addition, knee push-up can be recommended as shoulder muscle-strengthening exercises for individuals with low shoulder muscle strength.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.11 no.3
• /
• pp.287-301
• /
• 2009

The novel cut-and-cover tunnel construction method using rib-reinforced pre-cast arch segments has been recently developed and applied for practice to secure a structural stability of high covering and wide width section tunnels. Cut-and-cover tunnels are usually damaged by the seismic behavior of backfill grounds in case of a low covering condition. Seismic analyses are performed in this study to characterize the dynamic behavior of rib-reinforced pre-cast arch cut-and-cover tunnels. Seismic analyzes for 2 lane cast-in-place and rib-reinforced pre-cast arch cut-and-cover tunnels are carried out by using the commercial FDM program (FLAC2D) considering various field conditions such as the covering height embankment slope and excavation slope. It can be concluded that the amplification of seismic wave is reduced due to an increase in the structural stiffness induced by rib-reinforcement. The results show that the rib-reinforced pre-cast arch cut-and-cover tunnels are more effective against the seismic loading, compared to the cast-in-place cut-and-cover tunnels.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1B
• /
• pp.89-100
• /
• 2010

The performance evaluation of a conventional Wave Resonator at the entrance of harbors against solitary wave has been performed using 3D numerical wave flume. A wave resonator has been designed for the attenuation of the transmitted wave energy by trapping the short periodic incident waves only. In this study, however, the controlled performance of the wave resonator by its various widths has been numerically investigated for solitary waves. Source distribution method based on the Green function and the 3D one-field Model for immiscible TWO-Phase flows (TWOPM-3D) using 3D numerical wave flume were used for the short-periodic waves and the solitary waves, respectively, and these models were verified through the comparisons with the previous experimental and numerical results by other researchers. It was confirmed that the wave resonator is effective enough to control the solitary waves as well as the periodic waves when it compares with the case of no resonance system. Further, it was found that there is the optimal width of a wave resonator to attenuate the target solitary waves.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.2D
• /
• pp.153-161
• /
• 2010

The city planning of a local government is a continuous process that does not end with the creation of a plan but proceeds through decision-making, monitoring and evaluation phases. As a new city planning is changed and confirmed, there is a chance to construct a large scale road that is connected with an under constructed road. In this case, the expansion of the width and length of road, the addition of bridges or tunnels, and the change of the size and location of interchanges lead to many changes on road design and construction. In the past, the consignment contracts for a road construction have been made in limited numbers and for limited civil works. Now, it is growing in numbers and is making for large scale multi-works. However, the standard process and guidelines for the consignment contracts have not been suggested yet, so there is difficulty in performing the consigned road construction effectively. In this paper, the important factors for the consignment contracts are determined by construction document reviews and expert interviews. Based on these results, a standard process for the consigned contracts and a guideline for agreeing on construction cost are suggested. The costs that should be paid by a consignor are also defined.