• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1626-1629
• /
• 2002

This paper describes novel methods to construct fuzzy inference rules with gradient descent. The present methods have a constructive mechanism of the rule unit that is applicable in two parameters: the central value and the width of the membership function in the antecedent part. The first approach is to create the rule unit at the nearest position from the input space, for the central value of the membership function in the antecedent part. The second is to create the rule unit which has the minimum width, for the width of the membership function in the antecedent part. Experimental results are presented in order to show that the proposed methods are effective in difference on the inference error and the number of learning iterations.

• 대한전기학회논문지
• /
• 제45권2호
• /
• pp.289-293
• /
• 1996

The basic study on laser triggered lightning was carried out for the active protection of lightning in power transmission system. The lengths of generated plasma channels were simulated numerically for variations of energy and pulse width of CO$_{2}$ laser by Runge-Kutta-Gill method. As results, the effective lengths of plasma channels were 2.3m, 2.67m and 3.4m respectively for energy of 45J, 60J and 100J of CO$_{2}$ laser pulse with pulse width of 50nsec using focusing mirror with focal length of 10m. And also the effects of pulse width of first pulse and tail pulse of CO$_{2}$ laser on the length of plasma channel were examined.

• Journal of the Optical Society of Korea
• /
• 제17권6호
• /
• pp.486-490
• /
• 2013

A portable infrared laser transmitter delivering a highly uniform detectable beam was demonstrated. It incorporates a flexible beam shaper, comprising a perforated diffuser sheet in conjunction with a pinhole. The beam shaper plays the prominent role of flexibly tailoring the incoming light via both scattering and diffraction, in order to equalize the effective beam width over a long distance. The intensity profile of a generated beam was practically observed, demonstrating that a substantially uniform beam of 70-cm width was achieved for a given threshold detection level, with an average deviation of 6% over a range of 600 m.

• 한국공간구조학회논문집
• /
• 제24권1호
• /
• pp.37-45
• /
• 2024

Steel plate shear walls (SPSWs) have been recognized as an effective seismic-force resisting systems due to their excellent strength and stiffness characteristics. The infill steel plate in a SPSW is constrained by a boundary frame consisting of vertical and horizontal structural members. The main purpose of this study was to investigate deformation modes and hysteretic characteristics of steel plate shear walls (SPSWs) to consider the effects of their aspect ratios and width-to-thicness ratios. The finite element model (FEM) was establish in order to simulate cyclic responses of SPSWs which have the two-side clamped boundary condition and made of conventional steel grade. The stress distribution obtained from the FEA results demonstrated that the principal stresses on steel plate with large thickness-to-width ratio were more uniformly distributed along its horizontal cross section due to the formation of multiple struts.

• 토지주택연구
• /
• 제3권4호
• /
• pp.433-449
• /
• 2012

횡력을 받는 넓은 보와 기둥 내부접합부의 거동을 평가하기 위하여 넓은 보-기둥 접합부의 휨강성비와 유효폭 및 슬래브 유무를 변수로 6개의 1/2축소 모델 실험체를 제작하여 구조성능 평가를 수행하여 하중-변형, 연성, 강성 등을 평가하였다. 동 모델을 대상으로 비탄성해석을 수행하여 구조성능평가 결과와 비교하였다. 연구결과 도출된 결론은 다음과 같다. 넓은 보-기둥 내부 접합부는 중진지역인 국내에서 적용하고 있는 부분골조형 구조에 적용이 가능한 것으로 판단된다. 슬래브의 강성이 횡력을 받는 넓은 보-기둥 내부 접합부의 거동에 영향을 미치는 것으로 나타났다. 휨강성비가 2.0이상의 경우 T형보의 플랜지로서 슬래브 유효폭은 넓은 보 유효깊이의 2.0d로 평가되며, 휨강성비가 1.4~2.0일 경우, 슬래브 유효폭의 영향은 고려하지 않아도 되는 것으로 나타났다.

• 한국생산제조학회지
• /
• 제26권4호
• /
• pp.351-356
• /
• 2017

The resistance of printed patterns for electrodes fabricated using printing technology should be minimized. This parameter depends on the pattern width and thickness; however, from the viewpoint of printability, the printed patterns should be printed at the designed width. The resistance of the printed patterns as well as printability is affected by various printing conditions. In this paper, the printing condition is optimized to minimize the resistance of electrodes printed by the roll-to-roll gravure method. This is done by considering the spread ratio of pattern width as a parameter of printability using design experiments. The drying temperature, dryer fan speed, and printing speed are selected as effective factors for the experiment objective. The optimized conditions are obtained and reproducibility test using these demonstrates that the optimized conditions can produce low-resistance electrodes for printability of the pattern width.

• 전자공학회논문지
• /
• 제52권2호
• /
• pp.119-124
• /
• 2015

본 논문은 광원 라인폭이 spectral amplitude coding (SAC) OCDMA 시스템에 미치는 영향을 구하였다. q와 m값에 따라 다양한 코드를 구현할 수 있으므로 symmetric balance incomplete block design(BIBD) 코드를 분석에 사용하였다. 그 결과 입력파워가 큰 경우 ($P_{sr}=-10dBm$) 이상적인 BIBD 코드가 비이상적인 BIBD 코드보다 더 좁은 광원 라인폭이 요구되었다. 그러나 입력파워가 작은 경우 ($P_{sr}=-25dBm$)에는 그 반대로 비이상적인 BIBD 코드가 이상적인 BIBD 코드보다 더 좁은 광원 라인폭이 필요했다.

• 한국통신학회논문지
• /
• 제19권3호
• /
• pp.591-596
• /
• 1994

Gain-guided 구조를 갖는 단일양자우물 laser diode에서, stripe 폭에 따른 threshold의 변화를 복소수영역 유효굴적률방법을 이용하여 분석하였다. 분석결과 stripe 폭이 좁은 영역에서는, 측방향광집속률을 나타내기위하여 세롭게 도입된 변수 가 수직방향광집속률 가 감소함에따라 급격하게 감소하는 경향을 알아내었다. 따라서 일반적으로 매우작은 수직방향광집속률을 갖는 단일양자우물 laser diode에서는, stripe 폭의 크기에 따라서는 광집속률이 측방향은 물론 수직방향으로도 매우 나빠지게 됨으로 이득포와현상을 더욱 심하게시키게되며 경우에 따라서는 문턱전류가 비정상적으로 증가하는 현상으로 이어지게된다. 이와같은 문턱치의 stripe 폭에 대한 약간의 비정상적인 의존성을 이해하는 것은 양자우물 laser diode의 구조최적화에 있어서 매우 중요한 일이라고 판단된다.

• Journal of Welding and Joining
• /
• 제21권5호
• /
• pp.525-533
• /
• 2003

The dimensional accuracy and global roughness between successive layers of VLM-s, which is a new rapid prototyping process using hotwire cutter and EPS foam, depend significantly on the operating parameters of hotwire cutter. In the present study, the effect of cutting angle on the kerf width and edge shape in hotwire cutting of EPS foam for the case of single-sloped cutting with one cutting angle was investigated. Through single-sloped cutting tests, the modified relationship between kerf width and effective heat input, considering the effect of the cutting angle, and the relationship between the melted area and the cutting angle were obtained. In order to investigate the effect of cutting angles on the thermal field in EPS foam, transient heat transfer analyses using single-sloped volumetric heat flux model and locally-conformed mesh were performed. Through the comparison between experimental and numerical results, it was shown that the proposed analysis model is needed to estimate the three-dimensional temperature distribution of the EPS foam for the case of single-sloped hotwire cutting.

• 대한통합의학회지
• /
• 제1권2호
• /
• pp.67-80
• /
• 2013

Purpose : This study was to investigate effects of closed kinetic chain and open kinetic chain exercise on the lumbar stabilizarion. Methods : A total of 30 healthy over 20 years old college students(men = 14, women = 16) who were participated in this. We selected randomly people of CKC, OKC, and control group. For the past four weeks, CKC and OKC group worked out 3 times per week and then we compared within group and between groups on muscle width. Results : 1. The width of internal oblique, transverse abdominis, and multifidus were all significantly increased after four weeks exercise in the CKC group(P<.05). 2. The width of internal oblique, transverse abdominis, and multifidus were all increased after four weeks exercise in the OKC group but transverse abdominis musule only showed significant difference. 3. Difference values between pre-exercise and post-exercise of transverse abdominis and multifidus in the CKC group was significantly high and difference among the groups were significant. Conclusion : Accordingly, lumbar stabilizing exercise was more effective to increase a width of abdominal deep muscles through CKC exercise.