• Journal of Acupuncture Research
• /
• v.23 no.2
• /
• pp.73-90
• /
• 2006

Objectives : The effects of water extract of deer antler herbal-acupunture solution(DHS), prepared from the pilose antler of Cervus korea TEMMINCK var. mantchuricus Swinhoe (Nokyong), a traditional immunosuppressive and immune-activating Korean herbal- acupuncture, on collagen-induced arthritis(CIA:RA model) in mice was studied. Destruction of cartilage and bone are hallmarks of human rheumatoid arthritis, and controlling these erosive processes is the most challenging objective in the treatment of RA. Methods : We investigated the tissue protective effects of deer antler treatment using established murine collagen-induced arthritis(CIA) as a model. Potential synergy of low dosages of anti-inflammatory glucocorticosteroids and deer antler was also evaluated. Results : Treatment of established murine CIA with deer antler herbal-acupunture solution(DHS) $(10-50{\mu}g/day)$ suppressed disease activity and protected against cartilage and bone destruction. Although $10-50{\mu}g/day$ DHS had only a moderate effect on the inflammatory component of the disease activity, it strongly reduced cartilage pathology, as determined by histological examination. Serum cartilage oligomeric matrix protein(COMP) levels were significantly reduced, confirming decreased cartilage involvement. Histological analysis showed that bone destruction was prevented. DHS administration increased serum IL-1Ra levels and reduced anticollagen type II antibody levels. Treatment with low-dose $DHS(1{\mu}g/day)$ was ineffective in suppressing disease score, serum COMP or joint destruction. Synergistic suppression of both arthritis oseverity and COMP levels was noted when low-dose DHS was combined with prednisolone(0.05mg/kg/day), however, which in itself was not effective. Conclusion : DHS was shown to have the inhibiting effects against $IL-1{\alpha}-$ and $IL-1{\beta}-stimulated$ bone resorption. These results indicated that the DAS is not only highly stable and applicable to clinical uses in bone resorption, but also it will be served as a potent anti-inflammatory and anti-arthritic agents for treatment of human RA.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.3
• /
• pp.573-586
• /
• 2016

With the adoption of cloud computing, the number of companies that take advantage of cloud computing has increased. Additionally, various of existing service providers have moved their service onto the cloud and provided user with various cloud-based service. The management of user authentication and authorization in cloud-based service technology has become an important issue. This paper introduce a new technique for providing authentication and authorization with other inter-cloud IAM (Identity and Access Management). It is an essential and easy method for data sharing and communication between other cloud users. The proposed system uses the credentials of a user that has already joined an organization who would like to use other cloud services. When users of a cloud provider try to obtain access to the data of another cloud provider, part of credentials from IAM server will be forwarded to the cloud provider. Before the transaction, Access Agreement must be set for granting access to the resource of other Organization. a user can access the resource of other organization based on the control access configuration of the system. Using the above method, we could provide an effective and secure authentication system on the cloud.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3B
• /
• pp.112-122
• /
• 2008

Basing on Piconet, The Bluetooth System forms network and transmits data. There is one Master and maximum 7 Slave bluetooth devices in one piconet. A job scheduler performed by Master bluetooth device, gives the chance of data transmission to Slave bluetooth devices, which connected to Master, using polling method in piconet. The maximum data rate is 723.2 kb/s when it uses ACL link with DH5 packet type in a piconet which is constructed by two bluetooth devices. However, if there are one master and two slave devices in a piconet, then the maximum data rate is reduced to a half(361.6kb/s), because a master device has to support same data rate for all connected devices. And, there is the defect in scatternet when data transmission rate becomes low(Maximum rate: 302.2kb/s). This paper proposals the new ad-hoc network topology called "DoublePico"for overcome the low data transmission in scatternet which is constructed by piconets. The method of doublepico that represented in this paper makes high data transfer rate(Maximum rate: 457.57kb/s) in bluetooth ad-hoc networks.

• Composites Research
• /
• v.29 no.1
• /
• pp.1-6
• /
• 2016

Low-speed impact was localized on a stiffened composite structure, using 4 FBG sensors with 100 kHz-sampling rate interrogator and devised localization algorithm. The composite specimen consists of a main spar and several stringers, and the overall size of the specimen's surface is about $0.8{\times}1.2m$. Pre-stored reference data for 247 grid locations and 36 stiffener locations are gathered and used as comparison target for a random impact signal. The proposed algorithm uses the normalized cross-correlation method to compare the similarities of the two signals; the correlation results for each sensor's signal are multiplied by others, enabling mutual compensation. 20 verification points were successfully localized with a maximum error of 43.4 mm and an average error of 17.0 mm. For the same experimental setup, the performance of the proposed method is evaluated by reducing the number of sensors. It is revealed that the mutual compensation between the sensors is most effective in the case of a two sensor combination. For the sensor combination of FBG #1 and #2, the maximum localization error was 42.5 mm, with average error of 17.4 mm.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.799-804
• /
• 2016

Broadband powerline communication (BPLC) uses distribution lines as a medium for achieving effective bidirectional data communication along with electric current flow. As the material characteristics of power lines are not good at the communication channel, the development of power line communication (PLC) systems for internet, voice, and data services requires measurement-based models of the transfer characteristics of the network suitable for performance analysis by simulation. In this paper, an analytic model describing a complex transfer function is presented to obtain the attenuation and path parameters for a multipath power line model. The calculated results demonstrated frequency-selective fading in multipath channels and signal attenuation with frequency, and were in good agreement with the experimental results. Inductive coupling units are used as couplers for coupling the signal to the power line to avoid physical connections to the distribution line. The inductance of the ferrite core, which depends on the frequency, determines the cut-off frequency of the inductive coupler. Coupling loss can be minimized by increasing the number of windings around the coupler. Coupling efficiency was improved by more than 6 dB with three windings compared to the results obtained with one winding.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.95-99
• /
• 2015

The IRR(internal rate of return) is often used by investors for the evaluation of engineering projects. Unfortunately, it has serial flaws: (1) multiple real-valued IRRs may arise; (2) complex-valued IRRs may arise; (3) the IRR is, in special cases, incompatible with the net present value (NPV) in accept/reject decisions. The efforts of management scientists and economists in providing a reliable project rate of return have generated over the decades an immense amount of contributions aiming to solve these shortcomings. Especially, multiple internal rate of returns (IRRs) have a fatal flaw when we decide to accep it or not. To solve it, some researchers came up with external rate of returns (ERRs) such as ARR (Average Rate of Return) or MIRR (MIRR, Modified Internal Rate of Return). ARR or MIRR. will also always yield the same decision for a engineering project consistent with the NPV criterion. The ERRs are to modify the procedure for computing the rate of return by making explicit and consistent assumptions about the interest rate at which intermediate receipts from projects may be invested. This reinvestment could be either in other projects or in the outside market. However, when we use traditional ERRs, a volume of capital investment is still unclear. Alternatively, the productive rate of return (PRR) can settle these problems. Generally, a rate of return is a profit on an investment over a period of time, expressed as a proportion of the original investment. The time period is typically the life of a project. The PRR is based on the full life of the engineering project. but has been annualised to project one year. And the PRR uses the effective investment instead of the original investment. This method requires that the cash flow of an engineering project must be separated into 'investment' and 'loss' to calculate the PRR value. In this paper, we proposed a tabulated form for easy calculation of the PRR by modifing the profit and loss statement, and the cash flow statement.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.5
• /
• pp.16-24
• /
• 2011

The IEEE 802.11 wireless LAN (Local Area Network) is widely used for wireless access due to its easy deployment and low cost. Multicast in wireless LANs is very useful for transmitting data to multiple receivers compared to unicast to each receiver. In the IEEE 802.11 wireless LAN, multicast transmissions are unreliable since multicast data packets are transmitted without any feedback from receivers. Recently, various protocols have been proposed to enhance the reliability of multicast transmissions. They still have serious problems in reliability and efficiency due to the excessive control overhead by the use of a large number of control packets in the error recovery process, and due to a large number of retransmissions to satisfy all receivers. In this paper, we propose an effective scheme called PTRM(Proactive Transmission based Reliable Multicast). The proposed scheme uses a block erasure code to generate parity packets and to reduce the impact of independent packet error among receivers. After generating parity packets, the PTRM transmits data packets as many as receivers need to recover error, and then requests feedback from them. The simulation results show that the proposed scheme provides reliable multicast while minimizing the feedback overhead.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.4
• /
• pp.90-101
• /
• 2012

The landmark selection is crucial to successful perform in SLAM(Simultaneous Localization and Mapping) with a mono camera. Especially, in unknown environment, automatic landmark selection is needed since there is no advance information about landmark. In this paper, proposed visual attention system which modeled human's vision system will be used in order to select landmark automatically. The edge feature is one of the most important element for attention in previous visual attention system. However, when the edge feature is used in complicated indoor area, the response of complicated area disappears, and between flat surfaces are getting higher. Also, computation cost increases occurs due to the growth of the dimensionality since it uses the responses for 4 directions. This paper suggests to use a corner feature in order to solve or prevent the problems mentioned above. Using a corner feature can also increase the accuracy of data association by concentrating on area which is more complicated and informative in indoor environments. Finally, this paper will prove that visual attention system based on corner feature can be more effective in SLAM compared to previous method by experiment.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.3
• /
• pp.252-261
• /
• 2013

The common speech recognition system displays higher recognition performance in a quiet environment, while its performance declines sharply in a real environment where there are noises. To implement a speech recognizer that is robust in different speech settings, this study suggests the method of Parallel Model Combination adaptation using frequency-variant based on environment-awareness (FV-PMC), which uses variants in frequency; acquires the environmental data for speech recognition; applies it to upgrading the speech recognition model; and promotes its performance enhancement. This FV-PMC performs the speech recognition with the recognition model which is generated as followings: i) calculating the average frequency variant in advance among the readily-classified noise groups and setting it as a threshold value; ii) recalculating the frequency variant among noise groups when speech with unknown noises are input; iii) regarding the speech higher than the threshold value of the relevant group as the speech including the noise of its group; and iv) using the speech that includes this noise group. When noises were classified with the proposed FV-PMC, the average accuracy of classification was 56%, and the results from the speech recognition experiments showed the average recognition rate of Set A was 79.05%, the rate of Set B 79.43%m, and the rate of Set C 83.37% respectively. The grand mean of recognition rate was 80.62%, which demonstrates 5.69% more improved effects than the recognition rate of 74.93% of the existing Parallel Model Combination with a clear model, meaning that the proposed method is effective.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.56-61
• /
• 2009

Paradigm depending only on fossil fuel for building heat source is rapidly changing. Accelerating the change, as it has been known, is obligation for reducing green house gas coming from use of fossil fuel, i.e. reaction to United Nations Framework Convention on Climate Change. In addition, factors such as high oil price, unstable supply, weapon of petroleum and oil peak, by replacing fossil fuel, contributes to advance of environmental friendly renewable energy which can be continuously reusable. Therefore, current new energy policies, beyond enhancing effectiveness of heat using equipments, are to make best efforts for national competitiveness. Our country supports 11 areas for new renewable energy including sun light, solar heat and wind power. Among those areas, ocean thermal energy specifies tidal power generation using tide of sea, wave and temperature differences, wave power generation and thermal power generation. But heat use of heat source from sea water itself has been excluded as non-utilized energy. In the future, sea water heat source which has not been used so far will be required to be specified as new renewable energy. This research is to survey local heating system in Europe using sea water, central solar heating plants, seasonal thermal energy store and to analyze large scale central solar heating plants in German. Seasonal thermal energy store necessarily need to be equipped with large scale thermal energy store. Currently operating central solar heating system is a effective method which significantly enhances sharing rate of solar heat in a way that stores excessive heat generating in summer and then replenish insufficient heat for winter. Construction cost for this system is primarily dependent on large scale seasonal heat store and this high priced heat store merely plays its role once per year. Since our country is faced with 3 directional sea, active research and development for using sea water heat as cooling and heating heat source is required for seashore villages and building units. This research suggests how to utilize new energy in a way that stores cooling heat of sea water into seasonal thermal energy store when temperature of sea water is its lowest temperature in February based on West Sea and then uses it as cooling heat source when cooling is necessary. Since this method utilizes seasonal thermal energy store from existing central solar heating plant for heating and cooling purpose respectively twice per year maximizing energy efficiency by achieving 2 seasonal thermal energy store, active research and development is necessarily required for the future.