• Magazine of the Korean Society of Agricultural Engineers
• /
• v.32 no.3
• /
• pp.87-101
• /
• 1990

The purpose of this study is to estimate the flood discharge and runoff volume at a stream by using geomorphologic parameters obtained from the topographic maps following the law of stream classification and ordering by Horton and Strahier. The present model is modified from Cheng' s model which derives the geomorphologic instantaneous unit hydrograph. The present model uses the results of Laplace transformation and convolution intergral of probability density function of the travel time at each state. The stream flow velocity parameters are determined as a function of the rainfall intensity, and the effective rainfall is calculated by the SCS method. The total direct runoff volume until the time to peak is estimated by assuming a triangular hydrograph. The model is used to estimate the time to peak, the flood discharge, and the direct runoff at Andong, Imha. Geomchon, and Sunsan basin in the Nakdong River system. The results of the model application are as follows : 1.For each basin, as the rainfall intensity doubles form 1 mm/h to 2 mm/h with the same rainfall duration of 1 hour, the hydrographs show that the runoff volume doubles while the duration of the base flow and the time to peak are the same. This aggrees with the theory of the unit hydrograph. 2.Comparisions of the model predicted and observed values show that small relative errors of 0.44-7.4% of the flood discharge, and 1 hour difference in time to peak except the Geomchon basin which shows 10.32% and 2 hours respectively. 3.When the rainfall intensity is small, the error of flood discharge estimated by using this model is relatively large. The reason of this might be because of introducing the flood velocity concept in the stream flow velocity. 4.Total direct runoff volume until the time to peak estimated by using this model has small relative error comparing with the observed data. 5.The sensitivity analysis of velocity parameters to flood discharge shows that the flood discharge is sensitive to the velocity coefficient while it is insensitive to the ratio of arrival time of moving portion to that of storage portion of a stream and to the ratio of arrival time of stream to that of overland flow.

• Journal of Biosystems Engineering
• /
• v.2 no.2
• /
• pp.37-45
• /
• 1977

Solar energy is a potential source of power that offers much promise being used for low-temperature applications like drying farm crops, space heating, and water heating for domestic uses. Already much of it are being used for those purpose in foreign countries. However, very little research has been done to determine the possibility of using the solar energy in Korea. This study was conducted to develop the general prediction equation of the total radiation on a horizontal surface in Daejeon area based on 5 years 91972, Jun.1-1976. Dec.31) meteorological data (bright sunshine hours, average total horizontal radiation), and to obtain experimentally the thermal efficiency of solar air and water collectors, which will be used as a basic data of designing flat-plate solar collector system.In addition to the thermal efficiency of the collectorsthe relationship among those factors affecting it such as weather condition, orientation factor, and tilted angle of collector was analyzed. The results of this study were as follows. 1. The general predicted equation of the total radiation on a horizontal surface in Daejeon area based on bright sunshine hours was developed as $H_{av} =(1.546\frac{n}{N}-0.582)H_o$. Predicting the total radiation on a horizontal surface by the above equation was thought to be possible because to values of 0.882 was smaller than any t values at above 0.05 level on the basis of two tailed test of the difference between the calculated and the recorded values. 2.It was observed that optimum tilt angle of the collector in the summer and the autumn drying season was 13 degrees and 51 degrees respectively, these values could be obtained by adding or substracting approximately 25 degrees from the latitude of this area $(36.3^{\circ}N)$ .The relationship between orientation factor and declination of sun at suitable tilt angle of 33 degrees $(s=0.9\O)$ was shown at Fig.4. 3.The thermal efficiency of solar wdter collector was shown 13.4-51. 6% on Aug. 15 (the minimum radiation recorded) and 43.8 ~537% Aug.20 (the maximum radiation recorded), and 13.8~ 46.6 and 44.3~ 49.7 were shown on each corresponding day. 4.The thermal efficiency of the collectors according to the weather condition was shown a big difference of about 10% between the day of the maximum radiation recorded and the minimum, but the differen of efficiency between the air and the water collector was at most 2 ~ 3%. 5. Even if the efficiency of the solar water collector was a little higher than the solar air collector, for drying farm products, the solar air collector was thought to be more effective because the air heated by collector could be directly used for drying them.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.12
• /
• pp.1069-1075
• /
• 2017

With the recent development of space technology, the satellite market, especially the small satellite market, is growing globally. As the satellite market continues to grow, the launch vehicle market is also growing, and demand for low-cost launches is increasing. There are a number of options for low-cost launches, including development of engine that uses low-cost propellants, product and transportation cost savings, but the most effective way to reduce launch costs is to reuse the used launch vehicles. USA's Space Shuttle, a famous rocket as manned spacecraft, could be referred as the start of reusable launch vehicle. However, Space Shuttle had limited reusable parts and it was very expensive even though it is a reusable launch vehicle because of its low efficiency. In recent years, aiming at a real reusable launch vehicle, reusable launch vehicle for commercial purposes have been developed around USA's SpaceX and Blue Origin, and re-landing tests were successfully accomplished. In addition, SpaceX successfully did the re-using of first-stage launch vehicle that had been succeeded in re-landing already. In accordance with this trend, countries such as Europe and India are also concentrating on the study of reusable launch vehicles. Including Blue Origin, companies like Virgin Galactic and XCOR in the United States, are also trying to commercialize the same reusable technology as the private manned space tourism. Confirmation of these technology trends is essential, because the re-use technology could change the landscape of the global launch vehicle market.

• Journal of Biomedical Engineering Research
• /
• v.23 no.5
• /
• pp.351-364
• /
• 2002

Conventional 3D ultrasound imaging using mechanical ID arrays suffers from poor elevation resolution due to the limited depth-of-focus (DOF). On the other hand, 3D imaging systems using 2D phased arrays have a large number of active channels and hence require a very expensive and bulky beamforming hardware. To overcome these limitations, a new real-time volumetric imaging method using curved 2-D arrays is presented, in which a small subaperture, consisting of 256 elements, moves across the array surface to scan a volume of interest. For this purpose, a 2-D curved array is designed which consists of 90$\times$46 elements with 1.5λ inter-element spacing and has the same view angles along both the lateral and elevation directions as those of a commercial mechanical 1-D array. In the proposed method, transmit and receive subapertures are constructed by cutting the four corners of a rectangular aperture to obtain a required image qualify with a small number of active channels. In addition the receive subaperture size is increased by using a sparse array scheme that uses every other elements in both directions. To suppress the grating lobes elevated due to the increase in clement spacing, fold-over array scheme is adopted in transmit, which doubles the effective size of a transmit aperture in each direction. Computer simulation results show that the proposed method can provide almost the same and greatly improved resolutions in the lateral and elevation directions, respectively compared with the conventional 3D imaging with a mechanical 1-D array.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.11a
• /
• pp.327-332
• /
• 2004

USB(Universal Serial Bus) is one of the most popular communication interfaces. When USB is used in an extended range, especially configurating In-home network by connecting multiple digital devices each other, USB interface uses the bandwidth in the way of TDM(Time Division Multiplexing) so that the bottleneck of bus bandwidth can be brought. In this paper, the more effective usage of bus bandwidth to overcome this situation is introduced. Basically, in order to realize the system for transferring realtime moving picture data among digital information devices, we analyze USB transfer types and Descriptors and introduce the method to upgrade detailed performance of Isochronous transfer that is one of USB transfer types. In the case that Configuration descriptor of a device has Interface descriptor that has two AlternateSetting, if Isochronous transfers are not processed smoothly due to excessive bus traffic, the application of the device changes AlternateSetting of the Interface descriptor and requires a new configuration by SetInterface() request. As a result of this adaptive configuration, the least data frame rate is guaranteed to a device that the sufficient bandwidth is not alloted. And if the bus traffic is normal, the algorithm to return to the original AlteranteSetting is introduced. this introduced method resolve the bottleneck of moving picture transfer that can occur in home network connected by multiple digital devices.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.5
• /
• pp.485-495
• /
• 2000

The parallel computer system that uses parallel program on the application such as a large scale business or complex operation is required. One of crucial operation of parallel computer system is synchronization. A representative method of synchronization is barrier synchronization. A barrier forces all process to wait until all the process reach the barrier and then releases all of the processes. There are software schemes, hardware scheme, or combinations of these mechanism to achieve barrier synchronization which tends to use hardware scheme. Besides, barrier synchronization lets parallel computer system fast because it has fewer start-up overhead. In this paper, we propose a new switch module that can implement fast and fault-tolerant barrier synchronization in hardware scheme. A proposed barrier synchronization is operated not in full-switch-driven method but in processor-driven method. An effective barrier synchronization is executed with inexpensive hardware supports. Therefore, a new proposed hardware barrier synchronization is designed that it is operated in arbitrary network topology. In this paper, we only show comparison of barrier synchronization on Multistage Interconnection Network. This research results in 24.6-24.8% reduced average delay. Through this result, we can expect lower average delay in irregular network.

• Journal of KIISE:Databases
• /
• v.37 no.6
• /
• pp.308-314
• /
• 2010

As the price of flash memory continues to drop and the technology of flash SSD controller innovates, high performance flash SSDs with affordable prices flourish in the storage market. Nevertheless, it is hard to expect that flash SSDs will replace harddisks completely as database storage. Instead, the approach to use flash SSD as a cache for harddisks would be more practical, and, in fact, several hybrid storage architectures for flash memory and harddisk have been suggested in the literature. In this paper, we propose a new approach to use flash SSD as an extended buffer for main buffer in database systems, which stores the pages replaced out from main buffer and returns the pages which are re-referenced in the upper buffer layer, improving the system performance drastically. In contrast to the existing approaches to use flash SSD as a cache in the lower storage layer, our approach, which uses flash SSD as an extended buffer in the upper host, can provide fast random read speed for the warm pages which are being replaced out from the limited main buffer. In fact, for all the pages which are missing from the main buffer in a real TPC-C trace, the hit ratio in the extended buffer could be more than 60%, and this supports our conjecture that our simple extended buffer approach could be very effective as a cache. In terms of performance/price, our extended buffer architecture outperforms two other alternative approaches with the same cost, 1) large main buffer and 2) more harddisks.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.649-662
• /
• 2017

Since 1980, the number of universities have increased dramatically. However, compared to the quantitative growth, the lack of qualitative growth has often been criticized. Students entering university are estimated to decrease by half in 2025 compared to 2014. In swift response to challenges with decreasing student enrollment, the first University Reform Evaluation (URE) for innovating universities, was conducted and resulted in controversy. Opposition is based on distrust of the overall system, questioning the reliability of the evaluation process utilized for the URE evaluation index. Meta-evaluation is required to improve the quality of evaluation, and standards developed prior to conducting the URE. Therefore, an interdisciplinary approach is necessary for the evaluation of human resource development. This research uses the interdisciplinary approach from the human resources development point of view in attempting to develop meta-evaluation criteria which will enable effective evaluation and analysis of URE. The meta-evaluation standard features the creation of the ERPOU model, by conducting literature review, and considers data from expert symposiums, and surveys. The ERPOU model consists of 5 evaluation fields, 21 evaluation categories, and 42 evaluation standards.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.2
• /
• pp.137-152
• /
• 2020

In spite of the developing endovascular era, large (15-25 mm) and giant (>25 mm) wide-neck cerebral aneurysms remained technically challenging. Intracranial flow-diverting stents (FDS) were developed to address these challenges by targeting aneurysm hemodynamics to promote aneurysm occlusion. In 2011, the first FDS approved for use in the United States market. Shortly thereafter, the Pipeline of Uncoilable or Failed Aneurysms (PUFS) study was published demonstrating high efficacy and a similar complication profile to other intracranial stents. The initial FDA instructions for use (IFU) limited its use to patients 22 years old or older with wide-necked large or giant aneurysms of the internal carotid artery (ICA) from the petrous segment to superior hypophyseal artery/ophthalmic segment. Expanded IFU was tested in the Prospective Study on Embolization of Intracranial Aneurysms with PipelineTM Embolization Device (PREMIER) trial. With further post-approval clinical data, the United States FDA expanded the IFU to include patients with small or medium, wide-necked saccular or fusiform aneurysms from the petrous ICA to the ICA terminus. However, IFU is more restrictive in South Korea than in United States. Several systematic reviews and meta-analyses have sought to evaluate the overall efficacy of FDS for the treatment of cerebral aneurysms and consistently identify FDS as an effective technique for the treatment of aneurysms broadly with complication rates similar to other traditional techniques. A growing body of literature has demonstrated high efficacy of FDS for small aneurysms; distal artery aneurysms; non-saccular aneurysms posterior circulation aneurysms and complication rates similar to traditional techniques. In the short interval since the Pipeline Embolization Device was first introduced, FDS has been firmly entrenched as a powerful tool in the endovascular armamentarium. As new FDS are developed, established FDS are refined, and delivery systems are improved the uses for FDS will only expand further. Researchers continue to work to optimize the mechanical characteristics of the FDS themselves, aiming to optimize deploy ability and efficacy. With expanded use for small to medium aneurysms and posterior circulation aneurysms, FDS technology is firmly entrenched as a powerful tool to treat challenging aneurysms, both primarily and as an adjunct to coil embolization. With the aforementioned advances, the ease of FDS deployment will improve and complication rates will be further minimized. This will only further establish FDS deployment as a key strategy in the treatment of cerebral aneurysms.

• The Journal of the Korea Contents Association
• /
• v.8 no.1
• /
• pp.272-281
• /
• 2008

A layer channel, which can express effects on 3D image, is inserted to use it on application rendering effectively. The current method of effect rendering requires individual sources in storage and image processing, because it uses individual and mixed management of images and effects. However, we can save costs and improve results in images processing by processing both image and layer channels together. By changing image format to insert a layer channel in image and adding a hide function to conceal the layer channel and control to make it possible to approach image and layer channels simultaneously during loading image and techniques hiding the layer channel by changing image format with simple techniques, like alpha blending, etc., it is developed to improve reusability and be able to be used in all programs by combining the layer channel and image together, so that images in changed format can be viewed in general image viewers. With the configuration, we can improve processing speed by introducing image and layer channels simultaneously during loading images, and reduce the size of source storage space for layer channel images by inserting a layer channel in 3D images. Also, it allows managing images in 3D image and layer channels simultaneously, enabling effective expressions, and we can expect to use it effectively in multimedia image used in practical applications.