• Journal of Astronomy and Space Sciences
• /
• v.26 no.4
• /
• pp.667-676
• /
• 2009

The payload can be classified as a passive and active type. Generally radar satellite to acquire specific information through various radar images will use the SAR (Synthetic Aperture Radar) as active type payload. the principal of SAR satellite is to receive the signal returned from certain objects and/or surfaces in order to construct an radar image. The data acquired from the satellite in its real orbit shall be needed to perform successful CAL/VAL (Calibration & Validation) because the SAR satellite have to receive the returned signal for SAR image construction. In order to do the above, the returned signal shall be related to ground targets. Especially ground target is the corner reflector (CR) for CAL/VAL. Generally the reflector has various types and shapes. Their selection can be dependent on characteristics and mission objectives of SAR satellite. In this paper, reflector focused on the optimal case and effective case has been studied and then the trihedral corner reflector under this study has been designed and its performance also analyzed.

• Journal of KIISE:Databases
• /
• v.30 no.1
• /
• pp.52-63
• /
• 2003

Spatiotemporal moving objects are changing their Positions and/or shape over time in real world. As most of the indices of moving object are based on the R-tree. they have defects of the R-tree which are dead space and overlap. Some of the indices amplify the defects of the R-tree. In the paper, to solve the problems, we propose the MPR-tree(Moving Point R-tree) using Projection operation which has more effective search than existing moving point indices on time slice query and spatiotemporal range query. The MPR-tree connects positions of the same moving objects over time by using linked list, so it processes the combined query about trajectory effectively. The usefulness of the Projection operation is confirmed during processing moving object queries and in practical use of space from experimentation to compare MPR-tree with existing indices of moving objects. The proposed MPR-tree would be useful in the LBS, the car management using GPS, and the navigation system.

• KIEAE Journal
• /
• v.16 no.1
• /
• pp.81-87
• /
• 2016

Purpose: Heat transfers phenomena are described by the second order partial differential equation and its boundary conditions. In a three-dimensional structure of a building, the heat transfer phenomena generally include more than one material, and thus, become complicate. The analytic solutions are useful to understand heat transfer phenomena, but they can hardly be applied in engineering or design problems. Engineers and designers have generally been forced to use numerical methods providing reliable results. Finite volume methods with the unstructured grid system is only the suitable means of the analysis for the complex and arbitrary domains. Method: To obtain an numerical solution, a discretization method, which approximates the differential equations, and the interpolation methods for temperature and heat flux between two or more materials are required. The discretization methods are applied to small domains in space and time, and these numerical solutions form the descretized equations provide approximated solutions in both space and time. The accuracy of numerical solutions is dependent on the quality of discretizations and size of cells used. The higher accuracy, the higher numerical resources are required. The balance between the accuracy and difficulty of the numerical methods is critical for the success of the numerical analysis. A simple and easy interpolation methods among multiple materials are developed. The linear equations are solved with the BiCGSTAB being a effective matrix solver. Result: This study provides an overview of discretization methods, boundary interface, and matrix solver for the 3-dimensional numerical heat transfer including two materials.

• Journal of the Korea Convergence Society
• /
• v.9 no.7
• /
• pp.193-198
• /
• 2018

Applying VR technology to animation areas is emerging as a trend of recent years. So if you use this VR technology in traditional ink animation, 2D art piece is expected to be equipped with a new narrative style and visual and auditory language, making it a new animation genre. There's a lot of technical difficulties in putting the existing 2D ink image on a 360 degree display. VR ink animation has been created that gives depth to VR space by using layer extraction method based on depth of distance and placing layers extracted on curved surface that is aligned with depth in 360-degree space in the image of ink painting, which is the background of traditional ink animation. In the text, we took an overview on problems generated in extracting layers of distant view, close-range view and middle distant view from the existing image of ink painting and made suggestions of an effective way to approach them.

• Publications of The Korean Astronomical Society
• /
• v.23 no.1
• /
• pp.1-12
• /
• 2008

Understanding of the basic characteristics of an astronomical instrument is a prerequisite to obtaining reliable data from the instrument. We have analyzed more than 1,000 calibration images from the Fairchild 486 CCD (hereafter the Maidanak 4k CCD system) attached to the AZT-22 1.5m telescope at Maidanak Astronomical Observatory in Uzbekistan. The Maidanak 4k CCD system supports three readout modes through 1, 2, or 4 amplifiers. In most cases observers use 4-amplifier readout mode to save time. We have tested the stability and seasonal variation of zero levels and confirm that two quadrants of the images (Amp 1 & 2) show no appreciable seasonal variation. but the other two quadrants (Amp 3 & Amp 4) show an evident seasonal variation in the bias level. The Cryo Tiger, the cooling system used at the Maidanak 4k CCD system, maintains the CCD temperature at -108'E, and effectively suppresses the dark electrons. The mean value versus the variance plot of the flat images does not show the expected relation for an ideal Poisson noise distribution and this is attributed to the large variation in quantum efficiency between different pixels. In addition, we confirm that there is no appreciable difference in gain between readout amplifiers, but there is a large variation in quantum efficiency across CCD chip especially in U. Due to the finite length of shutter opening and closing time, the effective exposure time varies across the science images. We introduce two parameters to quantify the effect of this uneven illumination and present a method to remove these effects. We also present a method to remove the interference patterns appearing in the images obtained with longer wavelength filters and investigate the spatial variation of the point spread function.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.7
• /
• pp.550-557
• /
• 2017

Ionospheric delay, which affect the accuracy of GNSS positioning, is generated by electrons in Ionosphere. Solar activity level, region and time could make change of this delay level. Dual frequency receiver could effectively eliminate the delay using difference of refractive index between L1 to L2 frequency. But, Single frequency receiver have to use limited correction such as ionospheric model in standalone GNSS or PRC(pseudorange correction) in Differential GNSS. Generally, these corrections is effective in normal condition. but, they might be useless, when TEC(total electron content) extremely increase in local area. In this paper, monitoring algorithm is proposed for local ionospheric anomaly using multiple reference stations. For verification, the algorithm was performed with specific measurement data in Ionospheric storm day (20. Nov. 2003). this algorithm would detect local ionospheric anomaly and improve reliability of ionospheric corrections for standalone receiver.

• Journal of the Society of Naval Architects of Korea
• /
• v.52 no.6
• /
• pp.452-459
• /
• 2015

It is important to use bench test results in the design process of anti-rolling tanks. Traditional bench tester is usually designed to perform only roll motions about a fixed axis and relatively small so that the viscous effects may not be neglected. Novel bench tester which could adjust the motion center to realize the coupled motion of sway and roll has been devised and manufactured therefore, large scaled bench tester could be utilized for designing the passive anti-rolling tanks. The time history of the reference signal from the rotation sensor of the bench tester have been recorded and processed to determine the phase angle to derive the Response Amplitude Operator(RAO) of the stabilized ship. The breadth of ART tank model should be large up to 2 m to diminish viscous scale effect and the vertical position of the tank can be varied with the ship's center of motion. The periods and the amplitude of roll motion can be varied from 1.5 sec to 5 sec and up to ±20°, respectively. The components of the tester was expressed in three dimensional digital mockup (DMU) and assembled together in the CAD space. The final configuration of the bench tester has been determined by confirming the smooth operation of the moving parts without interference through the animation in CAD space. New analytic logic are introduced for the determination of hydrodynamic moment and phase difference due to fluid motion in ART and verified through the test. The developed bench tester is believed to be effective and accurate for the verification of stabilization effect of ART taking into the consideration of the sway effect in the design stage.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.8
• /
• pp.544-549
• /
• 2015

Since LEDs (light emitting diodes) have many advantages as a light source in vehicle headlamp, such as good reliability, energy and space saving, and flexible headlamp design. On the other hand, the dependence of its performance and life on temperature have great influence on its practical use. In this study, design and fabrication of heat sink for vehicle LED headlamp were performed using thermally-conductive plastics. This study focused on the effective heat sink structure with limited space in the vehicle LED headlamp. We designed two different prototype of heat sink by thermal simulation using SolidWorks program, which had excellent temperature characteristics. The two different prototype of heat sink were fabricated by injection molding with thermally-conductive plastics. The results showed that LED $T_j$ (junction temperature) of sample B (model 1) and sample C (model 1, 2) was below then $165^{\circ}C$ when applying the thermally-conductive plastics in heat sink of vehicle LED headlamp.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.13
• /
• pp.1013-1032
• /
• 2000

At present, the scale of Electronic Commerce through internet has been rapidly increasing due to the development of information & communication technology, and aggregated to 2.4 billion dollar in America last year (1998). The market scale of worldwide electronic commerce is also presumed to be about 130 billion dollar in 2000, and to occupy more than 20% of the whole world trade in world 2020. Since the right of trademark, despite of being effective only in registered nations on the principle of territorialism, is unified on the cyber space of internet without domestic barrier or local limitation which make it easier to conduct the distribution of information rapidly through the address-internet domain name, those are very important that the systematic dispute-solving plan on problems such as decision of its Act and international jurisdiction to be established, in an effort to prevent the newly emerging dispute instances such as trademark infringement and improper competitiveness. In addition, it is natural that on the threshold of the electronic commerce age which formed with an unified area without the worldwide specific regulation, each country including us makes haste with the enactment of "electronic commerce Act" aiming at coming into force in 1999, in keeping with getting through "non-tariff law on electronic commerce" by U. S. parliament on May, 1998. In view of the properties of electronic commerce transactions through internet, there are the large curtailment of distributive channel, surmounting of restrictions on transaction area, space and time and the easy feedback with consumer and the cheap-required capital, from which the problems may arise - registration of trademark, the trademark infringement of domain name and the protection of prestigious trademark. Therefore, it is necessary to take the counter-measure, with a view of reviewing the infringement of trademark and domain name and the instances of each national precedent and to preventing the disputes. The improvement of the persistent system should be needed to propel the harmonious protection of those holding trademark right's credit and demanders' expectant profit by way of the righteous use of trademark.

• Korean Journal of Human Ecology
• /
• v.24 no.2
• /
• pp.297-325
• /
• 2015

The purpose of this research is to analyze content elements of Housing area in 2013 middle school Technology Home Economics textbooks 1 and 2, total of 22 according to 2009 revised curriculum. The analysis method was content analysis, focusing on contents of main text, tables & figures, reading material, and activity materials by their content elements. This research will contribute in obtaining suggestion for the post curriculum/textbook development and helping teachers to perform a lesson. The results are as follows. First, Housing area included 1 to 4 content elements per each units, from 2 chapters and 6 units. The content elements stated in Home economics curriculum were total of 16 which consists of 'the meaning of housing,' 'housing types,' 'family forms,' 'family life style cycle,' 'life style,' 'neighboring environment,' 'co-living values,' 'air environment,' 'heat environment,' 'light environment,' 'acoustic environment,' 'space division,' 'circulation', 'effective use of space,' and 'sustainable dwelling practice.' All of these components are dealt with in every textbooks. Second, the numbers of content elements provided in each textbooks were the same, however they showed difference in their contextual aspect. Some contents need supplemental material for their lacking content element. Others need proper understanding of the concept because some showed different contents from the appropriate content elements. Third, repetitions in content elements were observed, the contents of 'co-living values' in textbook 1 and 'sustainable dwelling practice' in textbook 2 were similar in terms of eco-friendly housing, co-housing and universal housing. These two content elements should be merged as one next curriculum, or should be stated together in one subunit.