• 콘크리트학회논문집
• /
• 제21권5호
• /
• pp.661-668
• /
• 2009

횡하중을 받는 포스트 텐션(PT) 플랫 플레이트 슬래브 골조의 해석은 일반적으로 유효보폭모델을 많이 사용한다. 횡 변위비와 불균형 모멘트을 예측하기 위한 유효보폭모델의 정확성은 PT 플랫 플레이트 슬래브의 유효강성을 어떻게 평가하느냐에 달려 있다. 슬래브 강성은 횡하중에 의한 작용모멘트의 증가와 함께 감소되기 때문에, 슬래브의 강성 감소현상은 플랫 플레이트 골조의 해석에 반영되어야 하며 균열의 영향 또한 고려되어야 한다. 횡하중을 받는 PT 플랫 플레이트 슬래브 구조의 정확한 해석을 위해 슬래브 강성감소는 유효보폭모델이 정확하게 되어야 한다. 이 목적을 위해 이 연구는 기존 연구자들에 의해 실시된 PT 플랫 플레이트 내부 및 외부 접합부의 실험 결과를 수집하였다. 그리고 이 연구는 시행착오를 통해 각 실험체의 횡강성에 유효보폭모델의 강성이 수렴하도록 슬래브의 폭을 감소시켰다. 슬래브의 모멘트 크기에 따라 비선형 회귀 분석을 수행함으로서 슬래브에 대한 강성감소계수 계산식을 제안하였다. 이 연구에서는 제안된 식의 정확성을 검증하기 위해서 PT 플랫 플레이트 골조의 실험 결과와 비교하였다. 제안된 식을 적용한 유효보폭모델은 작용하중의 크기에 따라 변화하여 PT 실험체의 실제 강성을 잘 예측하는 것으로 나타났다.

• Steel and Composite Structures
• /
• 제22권3호
• /
• pp.691-712
• /
• 2016

In this editorial, buckling analytical investigation of the nanocomposite plate with square cut out reinforced by carbon nanotubes (CNTs) surrounded by Pasternak foundation is considered. The plate is presumed has square cut out in center and resting on Pasternak foundation. CNTs are used as amplifier in plate for diverse distribution, such as uniform distribution (UD) and three patterns of functionally graded (FG) distribution types of CNTs (FG-X, FG-A and FG-O). Moreover, the effective mechanical properties of nanocomposite plate are calculated from the rule of mixture. Domain decomposition method and orthogonal polynomials are applied in order to define the shape function of nanocomposite plate with square cut out. Finally, Rayleigh-Ritz energy method is used to obtain critical buckling load of system. A detailed parametric study is conducted to explicit the effects of the dimensions of plate, length of square cut out, different distribution of CNTs, elastic medium and volume fraction of CNTs. It is found from results that increase the dimensions of plate and length of square cut out have negative impact on buckling behavior of system but considering CNTs in plate has positive influence.

• 한국표면공학회지
• /
• 제53권5호
• /
• pp.227-231
• /
• 2020

This article investigated the effects of stainless steel plate-patterns bonded to aluminum frypan on the thermal distortion and surface temperature of the frypan during gas or induction heating. Two different stainless steel plate-patterns were employed: type A contains only circular holes and type B has not only circular holes but also vacant spaces of 0.5 mm thick and 40 mm long straight line crossing 60 mm long curved line. The bottom of the frypan was distorted during heating when type A stainless steel plate-bonded frypan while no significant thermal distortion was observed for type B stainless steel plate-bonded frypan during heating. Temperature of the frypan surface showed the same trend during gas heating, irrespective of stainless steel plate-patterns. During induction heating, however, the frypan with type B stainless steel plate-pattern showed lower surface temperature than the frypan with type A stainless steel plate-pattern. It is concluded that Type B stainless steel plate-pattern with circular holes and vacant spaces of lines is very effective for minimizing a thermal distortion and lowering the surface temperature of an aluminum frypan during induction heating.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2006년도 추계학술대회 학술발표 논문집 제16권 제2호
• /
• pp.203-207
• /
• 2006

Nowadays, Cars are continuing to grow at an alarming rate but they also cause many problems such as traffic accident, pollutions and so on. One of the most effective methods that prevent traffic accidents is the use of traffic monitoring systems, which are already widely used in many countries. The monitoring system is beginning to be used in domestic recently. An intelligent monitoring system generates photo images of cars as well as identifies cars by recognizing their plates. That is, the system automatically recognizes characters of vehicle plates. An automatic vehicle plate recognition consists of two main module: a vehicle plate locating module and a vehicle plate number identification module. We study for a vehicle plate number identification module in this paper. We use image preprocessing, feature extraction, multi-layer neural networks for recognizing characters of vehicle plates and we present a feature-comparison method for improving the performance of vehicle plate number identification module. In the experiment on identifying vehicle plate number, 300 images taken from various scenes were used. Of which, 8 images have been failed to identify vehicle plate number and the overall rate of success for our vehicle plate recognition algorithm is 98%.

• 한국전산구조공학회논문집
• /
• 제20권4호
• /
• pp.443-451
• /
• 2007

강바닥판 피로손상을 억제할 수 있는 유효한 방법의 하나로 데크 플레이트의 판 두께를 증가시키거나 세로리브의 보강 등에 의한 강성 증가를 고려할 수 있는데, 이 강성증가는 일반적으로 윤하중에 의한 강바닥판의 국부변형 억제 등에 효과가 있을 것으로 판단된다. 따라서 본 연구에서는 강바닥판교의 피로균열이 빈번히 발생해 가장 문제가 되는 U-rib와 가로리브 연결 상세부의 발생응력을 최소화할 수 있도록 벌크헤드플레이트나 수직리브와 같은 보강상세의 부착에 따른 변수로 정밀 구조해석을 수행하였다. 그 결과, 벌크헤드플레이트는 전체적으로 연결 상세부의 주응력을 경감시키나, 피로균열이 발생되는 용접 지단부에서는 오히려 응력집중이 커지는 경향을 나타내는 것을 알 수 있었다. 그러나 수직리브는 용접 지단부에서 응력집중을 경감시키는 효과를 나타내어 벌크헤드플레이트의 보강보다는 수직리브의 보강이 더 효율적일 것으로 판단된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.125-128
• /
• 2005

Recently new materials, such as fiber reinforced polymer(FRP) and other composite materials are being applied in reinforcing plate or plate or prestressing cables of concrete structures. Although these new materials themselves show the excellent durability and high strength, the bond behaviour between concrete surface and FRP is not well recognized. Therefore, this paper propose a evaluation method for effective bond length between fiber reinforced polymer(FRP) and concrete. To develop the evaluation method, this paper presents a review of current evaluation methods for effective bond length. These methods are compared by single face test, expose merits and demerits. And based on them, new evaluation method was developed. Finally, the new method was compared with existing methods to verify a adequateness for evaluation of effective bond length.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권9호
• /
• pp.421-426
• /
• 2005

A wire-plate discharge system with a slit barrier has been proposed and investigated experimentally by focusing on the discharges on the slit barrier and ozone generation characteristics. This wire-plate discharge system with a slit barrier can generate an intensive corona discharges, and produce corona discharge twice, once from the corona wire electrode and second time from the surface and the slits of the slit dielectric barrier. As a result this propose wire-plate discharge system with the slit barrier can produce greatly increased ozone than without the slit barrier. This type of wire-plate discharge system with the slit barrier could be used for effective ozone generation as a means with retard to the removal of pollutant gas

• 한국해양공학회지
• /
• 제26권4호
• /
• pp.70-76
• /
• 2012

The independent component analysis (ICA) technique is a source identification method that uses statistical independence to separate source signals from measured signals. It has been successfully applied to various fields such as medical care and communication. In this study, the ICA technique was adopted to analyze the vibration source contribution of plate structures. The theory of the ICA technique is introduced and the procedure of the vibration source contribution analysis based on the ICA technique is proposed. To investigate the applicability of the proposed method to plate structures, numerical examples are presented for a rectangular plate under harmonic force excitations. The results show that the proposed method could become an effective tool for the vibration source contribution analysis of a plate structure.

• Smart Structures and Systems
• /
• 제13권1호
• /
• pp.25-39
• /
• 2014

The axisymmetric dynamic instability of polar orthotropic sandwich annular plate combined with electrorheological (ER) fluid core layer and constraining layer are studied in this paper. And, the ER core layer and constraining layer are used to improve the stability of the annular plate system. The boundaries of instability regions for the polar orthotropic sandwich annular plate system are obtained by discrete layer annular finite element and the harmonic balance method. The rheological property of an electrorheological material, such as viscosity, plasticity, and elasticity can be controlled by applying different electric field strength. Thus, the damping characteristics of the sandwich system are more effective when the electric field is applied on the sandwich structure. Additionally, variations of the instability regions for the polar orthotropic sandwich annular plate with different applying electric field strength, thickness of ER layer and some designed parameters are investigated and discussed in this study.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.621-625
• /
• 1997

Recently, wash plate type hydraulic axial piston motors are being in extensively used in the world, because of simple design, lightweight, effective cost. But the structural problem of swash plate type hydraulic axial piston motor is the limited angle of swash plate and lateral force having a undesirable effect in piston. To solve these problems. a connecting rod mechanism. which is commonly used in hent axis type motors, is considered to be applied the swash plate cype motor. In this paper, kinematic analysis is done on the connecting rod mechanism. A series of formula are derived and numerical calculations are done for a set of motor parameters.