• 한국생산제조학회지
• /
• 제20권1호
• /
• pp.60-66
• /
• 2011

In this paper, the computer simulation analyzed the effective plastic strain and temperature behaviors. The quantitative analyses which proposed the effective mold design of S/CAM shaft was executed. The parameters of forging shape that affected on the optimize conditions that was calculated with simple equation were investigated. it is expected that the developed analysis model and design technique would greatly contribute to the drum brake optimal design considering effective plastic strain and temperature affected behaviors. This development could save more than 20% of production cost and reduced failure rate to more than 30%. By improving the life span of mold from 15,000 to 25,000, financial difficulty of company imposed on a mold manufacture could be overcome.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1113-1118
• /
• 2008

In the hot forging process, The forging defects that are caused by metal were strain, temperate, and inclusion. In this paper, the computer simulation analyzed the effective plastic strain and temperature behaviors. The quantitative analyses which proposed the effective mold design of S/CAM shaft was executed. The parameters of forging shape that affected on the optimize conditions that was calculated with simple equation were investigated. it is expected that the developed analysis model and design technique would greatly contribute to the drum brake optimal design considering temperature affected and material behaviors. This development could save more than 20% of production cost and reduced failure rate to more than 30%. By improving the life span of mold from 15,000 to 25,000, financial difficulty of company imposed on a mold manufacture could be overcome.

• 대한기계학회논문집A
• /
• 제24권6호
• /
• pp.1456-1469
• /
• 2000

Mechanical behaviors of uniaxially fiber-reinforced metal matrix composites under transverse loading conditions were studied at room and elevated temperatures. A mono-filament composite was selecte d as a representative analysis model with perfectly bonded fiber/matrix interface assumption. The elastic-plastic and visco-plastic models were investigated by both theoretical and numerical methods. The product of triaxiality factor and effective strain as well as stress components and strain energy was obtained as a function of location to estimate the failure sites in fiber-reinforced metal matrix composite. Results showed that fiber/ matrix interfacial debond plays a key role for local failure at the room temperature, while void creation and growth in addition to the interfacial debond are major concerns at the elevated temperature. It was also shown that there would be an optimal diameter of fiber for the strong fiber-reinforced metal matrix composite.

• Journal of Welding and Joining
• /
• 제3권1호
• /
• pp.22-31
• /
• 1985

Hot straining embrittlement is one of the most important factors which cause the brittle fracture initiation even in the service temperature in the case of mild steel and high tensile steel. Therefore it is necessary to analyze thoroughly the hot straining embrittlement occurred in weld HAZ of the structural steels. The behaviors of plastic deformation and fracture toughness at the notch tip of the hot strained weld HAZ in structural steels (SB 41 KS, SA 588-Grade A ASTM) have been studied by the recrystallization technique and crack opening displacement (COD) test method. The obtained results are summarized as follows; 1. The plastic zone is formed at the notch tip of weld HAZ owing to nomotonic and cyclic hot stran, and the maximum plastic strain increases with the accumulated hot straining amounts. 2. The distribution of the effective strain at the plastic deformed zone in HAZ can be determined as follows; (.epsilon. over bar $_{p}$ )$_{\chi}$=.epsilon. over bar $_{cr}$ ( $R_{/chi}$/.chi.)$^{m}$ where, .epsilon. over bar $_{cr}$ : (SB 41; .epsilon. over bar $_{cr}$ = 0.2, SA 588; .epsilon. over bar $_{cr}$ = 0.1) 3. The embrittlement of weld HAZ in SB 41 and SA 588 is influenced by hot strain, and the degree of embrittlement becomes deeper with hot straining amounts. 4. The embrittlement of weld HAZ of SB 41 is not influenced by the hot straining amounts until .epsilon. over bar $_{max}$ = 0.36, $R_{\chi}$ = 0.065mm, however the embrittlement of structure in SA 588 is considerably influenced even by a small quantity of the hot straining amounts.s.

• 마이크로전자및패키징학회지
• /
• 제17권3호
• /
• pp.17-26
• /
• 2010

반도체 패키지에 사용되고 있는 유연 솔더는 환경 보호 필요성 대문에 무연 솔더로 빠르게 대체되고 있다. 이와 같은 무연 솔더에 대한 여구는 주로 재료의 발견과 공정 적응성의 관점에서 이루어졌을 뿐, 기계적인 성질이나 신뢰성의 관점에서의 연구는 많이 이루어지지 않았다. 본 논문에서는 무아레 간섭계를 이용하여 유연 솔더와 무연 솔더 실장 WB-PBGA 패키지 결합체의 온도변화에 대한 열-기게적 거동을 해석하였다. 실시간 무아레 간섭계를 이용하여 각 온도 단계에서 변위 분포를 나타내는 간섭무늬를 얻고, 그로부터 유연과 무연의 솔더 조인트를 갖는 WB-PBGA 패키지의 굽힘 변형 거동 및 솔더 볼의 변형률을 비교 분석하였다. 분석결과를 보면 유연 솔더 실장 패키지 결합체의 솔더 볼은 칩경계 부근인 #3 솔더 볼에서 발생하는 전단변형률이 파손에 큰 영향을 미치며, 무연 솔더가 실장된 패키지 결합체의 솔더 볼은 가장 바깥 부근인 #7 솔더 볼에서 발행하는 수직 변형률이 파손에 큰 영향을 미칠 것으로 예측된다, 또한 무연 솔더 실장 패키지 결합체는 같은 온도 조건에서 유연 솔더 실장된 패키지에 비해 굽힘 변형이 휠씬 크게 발생될 뿐 아니라 솔더 볼의 유효변형률도 10% 정도 크게 발생하는 것으로 나타나서 열변형에 의한 파손에 취약할 것으로 예측된다.