• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.2
• /
• pp.98-103
• /
• 2013

In this work, we investigated the enhanced performance of IZO-based TFTs with $HfSiO_x$ gate insulators. Four types of $HfSiO_x$ gate insulators using different diposition powers were deposited by co-sputtering $HfO_2$ and Si target. To simplify the processing sequences, all of the layers composing of TFTs were deposited by rf-magnetron sputtering method using patterned shadow-masks without any intentional heating of substrate and subsequent thermal annealing. The four different $HfSiO_x$ structural properties were investigated x-ray diffraction(XRD), atomic force microscopy(AFM) and also analyzed the electrical characteristics. There were some noticeable differences depending on the composition of the $HfO_2$ and Si combination. The TFT based on $HfSiO_x$ gate insulator with $HfO_2$(100W)-Si(100W) showed the best results with a field effect mobility of 2.0[$cm^2/V{\cdot}s$], a threshold voltage of -0.5[V], an on/off ratio of 5.89E+05 and RMS of 0.26[nm]. This show that the composition of the $HfO_2$ and Si is an important factor in an $HfSiO_x$ insulator. In addition, the effective bonding of $HfO_2$ and Si reduced the defects in the insulator bulk and also improved the interface quality between the channel and the gate insulator.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.5
• /
• pp.1-11
• /
• 2016

The purpose of this study is to contribute the use of special taxi for the transportation vulnerable such as elderly and pregnant woman in terms of improving transportation mobility and extending social participation. We analyzed the DB users of STS system operating in Suwon, and surveyed the preference statement. Specifically, we have built transportation mode choice models for the elderly and pregnant woman, and then we drew the activating STS plan by comparing influence factors for each model. Based on the results of the study, 23% of STS user was the elderly people and pregnant women, 31% of user was for hospital passage purpose, and short-haul passage within 2 ~ 5km was 70% level of the passage. According to preference survey results between STS and Bus, fare was the highest impact factor in the mode choices for the elderly, and the participants who are older and car owners have been found to prefer the special taxi. For the pregnant woman, travel time and fare were the main influence factors of choices, and it was discovered that they preferred the special taxi when they are car owners and trips was frequented. Also, if the fare of special taxi is about 70% of the regular taxi fare, The share rates of Special Taxi comparing to bus for the elderly and pregnant woman are analyzed to be 51.1% and 63.6% each. Therefore, the adjustment of the fare would be effective to encourage the use of the special taxi. The results of this study can be used as a basis for establishing the rational fare structure of the special taxi.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06a
• /
• pp.522-522
• /
• 1996

An investigation of the effects of transverse magnetic field and Peltier effect on melt convection and macrosegregation in vertical Bridgman crystal grosth of Te doped InSb was been carried out by means of microstructure observation, Hall measurement, electrical resistivity measurement and X-ray analysis. Before the experiments, Interface stability, convective instability and suppression of convection by magnetic field were calculated theoretically. After doping 1018, 1019 cm-3 Te in InSb, the temperature of Bridgman furnace was set up at $650^{\circ}C$. The samples were grown in I.D. 11mm, 100mm high quartz tube. The velocity of growth was about 2${\mu}{\textrm}{m}$/sec. In order to obtain the suppression of convection by magnetic field in the middle of growth, 2-4KG magnetic field was set on the melt. For searching of the shape of solid-liquid interface and the actual velocity of crystal growth, let 2A current flow from solid to liquid for 1second every 50seconds repeatedly (Peltier effect). The grown InSb was polycrystal, and each grain was very sharp. There was no much difference between the sample with and without magnetic field at a point of view of microstructure. For the sample with Peltier effect, the Peltier marks(striation) were observed regularly as expected. Through these marks, it was found that the solid-liquid interface was flat and the actual growth velocity was about 1-2${\mu}{\textrm}{m}$/sec. On the ground of theoretical calculation, there is thermosolutal convection in the Te doped InSb melt without magnetic field in this growth condition. and if there is more than 1KG magnetic field, the convection is suppressed. Through this experiments, the effective distribution coefficients, koff, were 0.35 in the case of no magnetic field, and 0.45 when the magnetic field is 2KG, 0.7 at 4KG. It was found that the more magnetic field was applied, the more convection was suppressed. But there was some difference between the theoretical calculation and the experiment, the cause of the difference was thought due to the use of some approximated values in theoretical calculation. In addition to these results, the sample with Peltier effect showed unexpected result about the Te distribution in InSb. It looked like no convection and no macrosegregation. It was thought that the unexpected behavior was due to Peltier mark. that is, when the strong current flew the growing sample, the mark was formed by catching Te. As a result of the phenomena, the more Te containing thin layer was made. The layer ruled the Hall measurement. The values of resistivity and mobility of these samples were just a little than those of other reference. It was thought that the reason of this result was that these samples were due to polycrystal, that is, grain boundaries had an influence on this result.

• Culinary science and hospitality research
• /
• v.22 no.2
• /
• pp.234-251
• /
• 2016

The purpose of this study is to verify the effects of service quality and usage review of smartphone Maiib application(apps) on satisfaction, and reuse intention, convenience sampling method was employed and survey was conducted during the 15th of September, 2015 to the 30th on October as perceived by smartphone Maiib app users. Total of 312 responses were collected, and 295 usable data were used for statistical analysis excluding missing data. Descriptive analysis, factor analysis, and SEM were used to verify the hypothesis. The results from this study are as follows: first, reliability, empathy, usefulness of service quality significantly impact on Majib app satisfaction except informativeness and mobility; second, review assentation of the usage review characteristics significantly impact on Majib app satisfaction but review usefulness of the usage review characteristics significantly did not influence on Majib app satisfaction; third, smartphone Majib app satisfaction critically influences on reuse intention. Based on these results, current study can contribute to verify useful information is very important antecedent to construct the effective marketing strategy by smartphone app.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.12
• /
• pp.59-69
• /
• 2011

Recently, as people's interest in health care has been rising, the health care service awareness and utilization has been increasing. However, the existing healthcare services have problems such as inconvenience of mobility, the low reliability of input for information and low accuracy of information provided as well. in this study, we developed the m-Health application by utilizing smart phone with improvement of these problems. This application provided the total of 5 services such as notification for risk of cardiovascular disease, personalized dietary recommendations targeted to 20s and 30s who do not properly manage their health care by bad habits. In addition, the benefits and problems of these services were found out through the analysis for the general importance and satisfaction of these services by Importance-Performance Analysis (IPA) technique. In result of IPA analysis, The six items such as 'input accuracy and reliability of information', 'content reliability', 'proper health service recommendations', etc. among 12 of the items needed to receive the effective services on m-Health were belonged to importance and satisfaction area with high level. And, in the 'information security', the importance is high but the satisfaction was low. In conclusion, the further study for strengthening security of information, service update provided with PHR to consistently keep the advantage of these services will be conducted.

• International Journal of Highway Engineering
• /
• v.16 no.6
• /
• pp.159-167
• /
• 2014

PURPOSES : The purpose of this study is to analyze the requirements of the road traffic safety moderator robot when road repairing. The road traffic safety moderator robot is road traffic safety equipment and to conversions mechanical engineering and IT when road repairing. METHODS : The study used AHP based on the survey from road repair related expert that field engineers, design engineers, public officials and professors. The survey used paired comparison. The survey items were safety, convenience and economics. The safety is classified as visibility or efficiency, the convenience is classified as utility or mobility and the economics is classified as initial investment cost or maintenance $ management cost. The survey alternatives were the road traffic safety moderator robot, traffic regulation by human, traffic regulation by mannequin and traffic signs. The software for AHP is Expert Choice 2000. RESULTS : The results of AHP analyze, the weighted value of safety was analyzed with the highest at 0.488 of survey items. The weighted value of convenience was analyzed at 0.295, the weighted value of economics was analyzed at 0.218. The results of the road traffic safety moderator robot, the weight value of efficiency and utility were analyzed with the highest at 0.284 and 0.259 of alternatives. The weighted value of initial investment cost and maintenance & management cost were analyzed with the lowest at 0.203 and 0.211 of alternatives. The consistency test results of each items, null hypothesis is rejected because the CR values were 0.000 respectively. Therefore, the study results are consistency. CONCLUSIONS : The result of this study, overall value of the road traffic safety moderator robot came off second-best of other alternatives. The road traffic safety moderator robot has been received highest praise by the result of the study as good road traffic safety equipment when road repairing because the weighted values of efficiency and utility were analyzed with the highest of survey items. The efficiency mean securing safety and the utility mean practical assistance when road repairing. The results of this study showed that the road traffic safety moderator robot will effective for traffic safety when road repairing. economics and visibility are that supplementation of the road traffic safety moderator robot because the weighted values of economics and visibility were analyzed with the lowest of survey items. The consistency test results are consistency because the CR values were 0.000 respectively.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.4
• /
• pp.568-574
• /
• 2009

Tongue-tie is a congenital anomaly characterized by an abnormally short lingual frenum, which may restrict tongue tip mobility, In the neonate and infant, tongue-tie was said to cause difficult breast-feeding, In the older infant, toddler and young child, poor speech has been frequently listed because movement of tongue tip is limit ed. Also as a abnormal tongue position, various orthodontic problems, later mechanical and social manifestations could be developed. Treatment options such as observation, speech therapy, frenotomy and frenectomy have been suggested. The optimal timing for the surgery has not been determined, but early intervention may be appropriate for the children with significant tongue-tie who has the significant potential to speech difficulties and later social and mechanical problems. Sedation is an effective method for incapable of cooperative and the handicapped children, necessary to early intervention. We report three cases, using oral sedation for the frenectomy in young children with severe tongue-tie. After treatments, we could find out sufficient tongue movement and improved speech ability.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.7
• /
• pp.3223-3228
• /
• 2012

HMGN5 is a typical member of the HMGN (high mobility group nucleosome-binding protein) family which may function as a nucleosomal binding and transcriptional activating protein. Overexpression of HMGN5 has been observed in several human tumors but its role in tumorigenesis has not been fully clarified. To investigate its significance for human lung cancer progression, we successfully constructed a shRNA expression lentiviral vector in which sense and antisense sequences targeting the human HMGN5 were linked with a 9-nucleotide loop. Inhibitory effects of siRNA on endogenous HMGN5 gene expression and protein synthesis were demonstrated via real-time RT-PCR and western blotting. We found HMGN5 silencing to significantly inhibit A549 and H1299 cell proliferation assessed by MTT, BrdU incorporation and colony formation assays. Furthermore, flow cytometry analysis showed that specific knockdown of HMGN5 slowed down the cell cycle at the G0/G1 phase and decreased the populations of A549 and H1299 cells at the S and G2/M phases. Taken together, these results suggest that HMGN5 is directly involved in regulation cell proliferation in A549 and H1299 cells by influencing signaling pathways involved in cell cycle progression. Thus, our finding suggests that targeting HMGN5 may be an effective strategy for human lung cancer treatment.

• Journal of KIISE:Databases
• /
• v.32 no.3
• /
• pp.276-284
• /
• 2005

In the mobile computing environment, caching data at the client's side is a useful technique for improving the performance. For caching to be effective, the cache contents must be consistent with those stored in the server. That is, unfortunately, difficult to enforce due to the frequent disconnection and mobility of clients. In the literature, the basic approach adopted is for the sever to periodically broadcast invalidation reports(IRs) that contain information about objects that have been updated recently. However IR-based cache maintenance scheme has a main drawback. Any client who has been disconnected longer than w seconds has to discard all cached items even some of them may still be valid. In this paper, we propose two main schemes which can adapt clients' losing IR messages by long disconnection. First, the client sends its disconnection time when connection is re-established, and the server uses this information to decide the size of broadcast window w dynamically. Second, the server maintains IR messages for a given period of time and a client who has been disconnected longer than w seconds can verify its cache consistency individually. Compared to previous IR-based schemes, our schemes can significantly reduce cache missing and uplink request and improve the throughput by reducing response time.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.2
• /
• pp.203-244
• /
• 1998

The human mandible is always under the condition of loading by the various forces extorted by the attached muscles. The loading is an important condition of the stomatognathic system. This condition is composed of the direction and amount of forces of the masticatory muscles, which are controlled by the neuromuscular system, and always influenced by the movement of both opening and closing. Mandible is a strong foundation for the teeth or various prostheses, nevetheless it is a elastic body which accompanies deformation by the external forces on it. The elastic properties of the mandible is influenced by the various procedures such as conventional restorative treatments, osseointegrated implant treatments, reconstructive surgical procedures and so forth. Among the treatments the osseointegrated implant has no periodontal ligaments, which exist around the natural teeth to allow physiologic mobility in the alveolar socket. And so around the osseointegrated implant, there is almost no damping effect during the transmission of occlusal stress and displacements. If the osseointegrated implants are connected by the superstructure for the stabilization and effective distribution of occlusal stresses, the elastic properties of mandible is restricted according to the extent of 'splinting' by the superstructure and implants. To investigate the change of elastic behaviour of the mandible which has osseointegrated implant prosthesis of various numbers of implant installment and span of superstructre, a three dimensional finite element model was developed and analyzed with conditions mentioned above. The conclusions are as follows : 1. The displacements are primarily developed at the area of muscle attachment and distributed all around the mandible according to the various properties of bone. 2. The segmentation in the superstructure has few influence on the distribution of stress and displacement. 3. In the load case of ICP, the concentration of tensional stress was observed at the anterior portion of the ramus($9.22E+6N/m^2$) and at the lingual portion of the symphysis menti($8.36E+6N/m^2$). 4. In the load case of INC, the concentration of tensional stress was observed at the anterior portion of the ramus($9.90E+6N/m^2$) and the concentration of tensional stress was observed at the lingual portion of the symphysis menti($2.38E+6N/m^2$)). 5. In the load case of UTCP, the relatively high concentration of tensional stress($3.66E+7N/m^2$) was observed at the internal surface of the condylar neck.