• 제목/요약/키워드: Effective Mass Properties

검색결과 212건 처리시간 0.029초

Preparation and Adsorption Properties of PA6/PSMA-OA Molecularly Imprinted Composite Membranes in Supercritical CO2

  • Zhang, Qing;Zhang, Xingyuan;Zhang, Wencheng;Pan, Jian;Liu, Ling;Zhang, Haitao;Zhao, Dong;Li, Zhi
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권9호
    • /
    • pp.3348-3354
    • /
    • 2011
  • Oleanolic acid (OA) as template molecule, polyamide-6 (PA6) as basement membrane and poly(styrene-comaleic acid) (PSMA) were used to prepare PA6/PSMA-OA molecularly imprinted composite membranes by phase inversion method in supercritical $CO_2$ ($ScCO_2$). The template molecule (OA), [poly(styrene-co-maleic anhydride) (PSMAH), PSMA, molecularly imprinted membranes (MIMs) imprinting OA and MIMs after elution were all characterized by Fourier transform infrared spectroscopy (FTIR). The conditions that were the mass ratio between PSMA and OA from 3:1 to 8:1, temperature of $ScCO_2$ from $35^{\circ}C$ to $50^{\circ}C$ and pressure of $ScCO_2$ 12 MPa to 17 MPa were studied. It was obtained the largest adsorption rate and purity of OA after adsorption of the resultant MIMs, 50.41% and 96.15% respectively. After using PA6 film and non-woven fabrics as basement membrane respectively, it was found that smaller aperture of PA6 was used as basement membrane, a higher adsorption rate and a higher purity of OA after adsorption of the MIMs were obtained, and so were the stability and reproducibility of the resultant MIMs. After template molecules being removed, the MIMs had effective selectivity hydrogen bonding to separately bind in the binary components to the template molecules-oleanolic acid.

황칠나무의 휘발성 화합물 분석 및 HepG2 세포의 증식 억제 효과 (Volatile Compounds and Antiproliferative Effects of Dendropanax morbifera on HepG2 Cells)

  • 양선아;코랄리아 가르시아;이지원
    • 생명과학회지
    • /
    • 제27권5호
    • /
    • pp.561-566
    • /
    • 2017
  • 황칠나무(Dendropanax morbifera Lev.)는 황금빛의 수액과 약리효과로 한국에서 알려져 있으며, 잎 및 줄기 추출물의 다양한 효능은 피부질환, 편두통, 월경통, 근육통 및 전염성 질환 등의 질병을 개선하는 약리 성분을 공급하는 우수한 공급원이 될 수 있는 것을 시사한다. 그러나, 황칠나무 추출물의 효능에 관해서는 다양한 연구가 보고되어 있으나, 부위별 휘발성 성분의 조성에 대한 보고는 전무한 상황이다. 따라서, 본 연구는 황칠나무의 잎, 줄기 및 수액의 주요 휘발성 성분을 규명하기 위하여, 유기용매 및 초임계유체추출법을 이용한 추출물을 가스크로마토그래피-질량분석법으로 분석하였다. 잎 추출물에서는 15가지 화합물이 검출되었으며, 줄기 및 수액에는 각각 29가지 및 3가지 성분이 확인되었다. 또한 용매와 초임계유체추출법을 사용하여 얻은 휘발성 성분의 프로파일은 다르게 나타났다. 잎의 용매 추출물과 줄기의 초임계유체 추출물에서는 에스테르와 방향족 탄화수소가, 잎의 초임계유체 추출물 및 줄기의 초임계유체 추출물에는 테르페노이드가 주요 성분으로 나타났다. 한편, limonene (96.3%), ${\alpha}$-pinene, 그리고 ${\beta}$-myrcene은 수액 용매 추출물의 휘발성 성분으로 확인되었다. 잎 및 줄기의 용매 추출물의 암세포 증식 억제 효과를 평가한 결과, 잎의 용매 추출물이 HepG2 세포의 증식을 유의적으로 감소시키는 것으로 나타났다.

Development of Insulation Sheet Materials and Their Sound Characterization

  • Ni, Qing-Qing;Lu, Enjie;Kurahashi, Naoya;Kurashiki, Ken;Kimura, Teruo
    • Advanced Composite Materials
    • /
    • 제17권1호
    • /
    • pp.25-40
    • /
    • 2008
  • The research and development in soundproof materials for preventing noise have attracted great attention due to their social impact. Noise insulation materials are especially important in the field of soundproofing. Since the insulation ability of most materials follows a mass rule, the heavy weight materials like concrete, lead and steel board are mainly used in the current noise insulation materials. To overcome some weak points in these materials, fiber reinforced composite materials with lightweight and other high performance characteristics are now being used. In this paper, innovative insulation sheet materials with carbon and/or glass fabrics and nano-silica hybrid PU resin are developed. The parameters related to sound performance, such as materials and fabric texture in base fabric, hybrid method of resin, size of silica particle and so on, are investigated. At the same time, the wave analysis code (PZFlex) is used to simulate some of experimental results. As a result, it is found that both bundle density and fabric texture in the base fabrics play an important role on the soundproof performance. Compared with the effect of base fabrics, the transmission loss in sheet materials increased more than 10 dB even though the thickness of the sample was only about 0.7 mm. The results show different values of transmission loss factor when the diameters of silica particles in coating materials changed. It is understood that the effect of the soundproof performance is different due to the change of hybrid method and the size of silica particles. Fillers occupying appropriate positions and with optimum size may achieve a better effect in soundproof performance. The effect of the particle content on the soundproof performance is confirmed, but there is a limit for the addition of the fillers. The optimization of silica content for the improvement of the sound insulation effect is important. It is observed that nano-particles will have better effect on the high soundproof performance. The sound insulation effect has been understood through a comparison between the experimental and analytical results. It is confirmed that the time-domain finite wave analysis (PZFlex) is effective for the prediction and design of soundproof performance materials. Both experimental and analytical results indicate that the developed materials have advantages in lightweight, flexibility, other mechanical properties and excellent soundproof performance.

에너지 밀도 및 분말 증착 밀도를 고려한 직접 에너지 증착법 기반 Ti-6Al-4V 합금의 적층공정 최적화 (Additive Manufacturing Optimization of Directed Energy Deposition-Processed Ti-6Al-4V Alloy using Energy Density and Powder Deposition Density)

  • 이유경;김은성;천세호;설재복;성효경;오정석;김형섭;이태경;남태현;김정기
    • 한국분말재료학회지
    • /
    • 제28권6호
    • /
    • pp.491-496
    • /
    • 2021
  • The process optimization of directed energy deposition (DED) has become imperative in the manufacture of reliable products. However, an energy-density-based approach without a sufficient powder feed rate hinders the attainment of an appropriate processing window for DED-processed materials. Optimizing the processing of DED-processed Ti-6Al- 4V alloys using energy per unit area (Eeff) and powder deposition density (PDDeff) as parameters helps overcome this problem in the present work. The experimental results show a lack of fusion, complete melting, and overmelting regions, which can be differentiated using energy per unit mass as a measure. Moreover, the optimized processing window (Eeff = 44~47 J/mm2 and PDDeff = 0.002~0.0025 g/mm2) is located within the complete melting region. This result shows that the Eeff and PDDeff-based processing optimization methodology is effective for estimating the properties of DED-processed materials.

넓은 작동 온도범위를 가지는 V2O5-WO3/TiO2 SCR 촉매 개발을 위한 티타늄 이소프로폭사이드(TTIP) 활용 전략 (Titanium Isopropoxide (TTIP) Treatment Strategy for V2O5-WO3/TiO2 SCR Catalysts with a Wide Operating Temperature)

  • 이재호;조광훈;이금연;임창용;이영세;김태욱
    • 공업화학
    • /
    • 제34권4호
    • /
    • pp.357-364
    • /
    • 2023
  • 선택적 촉매 환원(SCR)은 질소산화물 배출을 줄이는 가장 효과적인 방법이지만, V2O5-WO3/TiO2 촉매가 좁은 작동온도 (300~400℃) 범위를 가지기 때문에, V2O5-WO3/TiO2 촉매의 작동 온도범위가 200~450℃인 새로운 촉매를 개발하였다. SCR 과정에서 생성되는 촉매 독인 황산암모늄은 350℃ 이상으로 가열함으로써 제거할 수 있다. 촉매 활성 부위의 수를 증가시키고 활성 물질의 분산을 촉진하기 위해 TiO2 지지체에 티타늄 이소프로폭사이드(TTIP) 처리를 여러 TTIP/TiO2 질량비로 진행하였다. 그 중 5 wt% TTIP 부하에서 높은 W 분산성으로 인해 열 안정성이 증가하였고 V5+가 형성되어 최적의 성능을 보였다. 5 wt% TTIP 부하로 처리된 촉매를 One-step co-precipitation으로 제조하였을 때 기존의 방법보다 더 나은 V-OH와 W-OH 분산 및 상호작용 향상이 나타나 더 낮은 온도에서 높은 촉매 활성으로 인해 향상된 성능을 보였다. 이를 향후 TTIP를 이용하여 TiO2촉매의 표면을 개선하려는 연구자에게 이해하기 쉽게 설명하고자 하였다.

설비공학 분야의 최근 연구 동향 : 2013년 학회지 논문에 대한 종합적 고찰 (Recent Progress in Air-Conditioning and Refrigeration Research : A Review of Papers Published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2013)

  • 이대영;김사량;김현정;김동선;박준석;임병찬
    • 설비공학논문집
    • /
    • 제26권12호
    • /
    • pp.605-619
    • /
    • 2014
  • This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2013. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of fluid machinery, pipes and relative parts including orifices, dampers and ducts, fuel cells and power plants, cooling and air-conditioning, heat and mass transfer, two phase flow, and the flow around buildings and structures. Research issues dealing with home appliances, flows around buildings, nuclear power plant, and manufacturing processes are newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for general analytical model for desiccant wheels, the effects of water absorption on the thermal conductivity of insulation materials, thermal properties of Octadecane/xGnP shape-stabilized phase change materials and $CO_2$ and $CO_2$-Hydrate mixture, effect of ground source heat pump system, the heat flux meter location for the performance test of a refrigerator vacuum insulation panel, a parallel flow evaporator for a heat pump dryer, the condensation risk assessment of vacuum multi-layer glass and triple glass, optimization of a forced convection type PCM refrigeration module, surface temperature sensor using fluorescent nanoporous thin film. In the area of pool boiling and condensing heat transfer, researches on ammonia inside horizontal smooth small tube, R1234yf on various enhanced surfaces, HFC32/HFC152a on a plain surface, spray cooling up to critical heat flux on a low-fin enhanced surface were actively carried out. In the area of industrial heat exchangers, researches on a fin tube type adsorber, the mass-transfer kinetics of a fin-tube-type adsorption bed, fin-and-tube heat exchangers having sine wave fins and oval tubes, louvered fin heat exchanger were performed. (3) In the field of refrigeration, studies are categorized into three groups namely refrigeration cycle, refrigerant and modeling and control. In the category of refrigeration cycle, studies were focused on the enhancement or optimization of experimental or commercial systems including a R410a VRF(Various Refrigerant Flow) heat pump, a R134a 2-stage screw heat pump and a R134a double-heat source automotive air-conditioner system. In the category of refrigerant, studies were carried out for the application of alternative refrigerants or refrigeration technologies including $CO_2$ water heaters, a R1234yf automotive air-conditioner, a R436b water cooler and a thermoelectric refrigerator. In the category of modeling and control, theoretical and experimental studies were carried out to predict the performance of various thermal and control systems including the long-term energy analysis of a geo-thermal heat pump system coupled to cast-in-place energy piles, the dynamic simulation of a water heater-coupled hybrid heat pump and the numerical simulation of an integral optimum regulating controller for a system heat pump. (4) In building mechanical system research fields, twenty one studies were conducted to achieve effective design of the mechanical systems, and also to maximize the energy efficiency of buildings. The topics of the studies included heating and cooling, HVAC system, ventilation, and renewable energies in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment is mostly focused on indoor environment and building energy. The main researches of indoor environment are related to infiltration, ventilation, leak flow and airtightness performance in residential building. The subjects of building energy are worked on energy saving, operation method and optimum operation of building energy systems. The remained studies are related to the special facility such as cleanroom, internet data center and biosafety laboratory. water supply and drain system, defining standard input variables of BIM (Building Information Modeling) for facility management system, estimating capability and providing operation guidelines of subway station as shelter for refuge and evaluation of pollutant emissions from furniture-like products.

JRC 등급에 따른 절리면 수리특성 연구 (A Study on Hydraulic Characteristics of Rock Joints Dependant on JRC Ranges)

  • 채병곤;서용석;김지수
    • 지질공학
    • /
    • 제14권4호
    • /
    • pp.461-468
    • /
    • 2004
  • 이 연구에서는 암반 내 절리면의 거칠기 정도에 따른 수리특성의 차이를 규명하고자 Barton(1976)이 제안한 절리면 거칠기 계수(Joint Roughness Coefficient; JRC) 등급별로 투수계수를 산정하였다. 이를 위하여 JRC등급 형태별로 고속퓨리에 변환을 이용한 스펙트럼 분석을 실시하여 각 거칠기 등급별로 영향력 이 큰 주파수 성분을 추출하였다. 스펙트럼 분석결과 낮은 JRC 등급을 갖는 절리들이 높은 등급의 절리들보다 저주파 성분이 더 강하게 구성되어 있으며, 높은 JRC등급의 절리들은 상대적으로 고주파 성분이 더 크게 차지하는 것을 알 수 있었다. 스펙트럼 성분 중에서 영향력이 큰 주파수 성분만을 이용하여 퓨리에 역변환을 실시해 JRC 등급별 절리 모델을 생성하였다. 생성된 절리 모델은 거칠기 성분을 포함한 모델로써, 균질화 해석기법을 이용하여 각 모델의 투수계수를 산정하였다. 균질화 해석법은 섭동이론을 적용한 것으로서, 미시규모(microscale) 매질특성과 거시규모(macroscale) 매질특성을 동시에 고려하여 투수계수를 계산할 수 있으므로 균열 기하양상의 국부적 영향을 고려한 투수특성을 정확히 해석할 수 있다. 균질화 해석법을 이용해 투수계수를 산정한 결과, 절리 간극이 동일한 평행판 모델을 가정한 JRC 등급별 투수계수는 $10^{-3}\~10^{-4}m/sec$의 범위에 분포한다. 반면, 전단변형이 발생한 것을 가정한 모델에서는 $10^{-4}\~10^{-5}m/sec$의 범위에 투수계수가 분포한다. 이 경우는 투수계수 분포가 일정한 변화양상을 보이지 않고 JRC등급에 따라 불규칙적인 투수계수 분포를 보인다. 동일한 크기의 간극을 갖는 경우임에도 불구하고 JRC 등급별로 투수계수의 차이가 발생하거나 전단변위에 따라 투수계수가 불규칙적으로 분포하는 것은 거칠기 변화가 투수계수의 변화에 영향을 미침을 지시하는 것으로서, 이 연구를 통해 암반내 절리 등 균열을 따른 수리특성 규명에 있어 절리면 거칠기의 영향은 반드시 고려되어야 함을 알 수 있다.

화강암질풍화토(花崗岩質風化土)의 역학적(力學的) 성질(性質)에 관(關)한 연구(硏究) -전단강도(剪斷强度)의 영향요소(影響要素)와 견밀도(堅密度)에 대(對)하여- (Studies on the Mechanical Properties of Weathered Granitic Soil -On the Elements of Shear Strength and Hardness-)

  • 조희두
    • 한국산림과학회지
    • /
    • 제66권1호
    • /
    • pp.16-36
    • /
    • 1984
  • 화강암질풍화토(花崗岩質風化土)의 미교란(未攪亂) 시료(試料)를 사용하여 일면(一面) 직접(直接) 전단시험(剪斷試驗)으로 측정(測定)한 전단강도(剪斷强度)와 함수비(含水比), 간극비(間隙比), 건조밀도(乾燥密度), 비중(比重)과의 관계(關係)를 통계(統計) 분석(分析)하였고, 화강암질풍화토(花崗岩質風化土)의 사방시공지(砂防施工地)에 식재(植栽)된 리기다소나무림(林)과 리기테-다소나무림(林)에서 토양단면(土壤斷面)을 만들어 산중식토양경도계(山中式土壤硬度計)로 토양(土壤)의 견밀도(堅密度)를 측정(測定)하고 수근분포(樹根分布)를 조사(調査)하여 통계(統計) 분석(分析)한 결과(結果) 다음과 같다. 1) 함수비(含水比), 간극비(間隙比)와 전단강도(剪斷强度) 간(間)에는 유의적(有意的)인 부(負)의 상관(相關)이며 직접적(直接的)인 관계(關係)에 있었다. 2) 건조밀도(乾燥密度)와 전단강도(剪斷强度) 사이에는 정(正)의 상관(相關)이며 직접적(直接的)인 관계(關係)에 있었다. 3) 비중(比重)과 전단강도(剪斷强度) 간(間)에는 유의적(有意的)인 상관관계(相關關係)를 인정(認定)할 수 없었다. 4) 전단강도(剪斷强度)에 영향(影響)을 미치는 영향요소(影響要素)의 직접효과(直接效果)의 크기는 함수비(含水比)>간극비(間隙比)>건조밀도(乾燥密度)의 순위(順位)이다. 5) 다중선형(多重線型) 회귀방정식(回歸方程式)의 분산분석결과(分散分析結果) 함수비(含水比)만이 회귀성(回歸性)이 인정(認定)되므로 함수비(含水比)를 독립변수(獨立變數)로 하여 전단강도(剪斷强度)를 추정(推定)하기 위한 회귀방정식(回歸方程式)은 제한(制限)된 건조밀도(乾燥密度)의 범위내(範圍內)에서 적합도(適合度)가 매우 높게 평가(評價)되었다. 6) 토양(土壤)의 견밀도(堅密度)는 토심(土深)이 깊어짐에 따라 높아진다. 7) 토양(土壤)의 지표경도(指標硬度)와 수근수(樹根數) 간(間)에는 유의적(有意的)인 부(負)의 상관(相關)이며 직접적(直接的)인 관계(關係)에 있었다. 8) 리기다소나무와 리기테-다소나무의 수근(樹根)은 토심(土深) 20cm까지에 대부분 분포(分布)하고 있었다. 9) 리기다소나무림(林)과 리기테-다소나무림(林)에서 측정(測定)한 토양(土壤)의 지표경도(指標硬度)를 독립변수(獨立變數)로한 회귀방정식(回歸方程式)으로 수근수(樹根數)를 추정(推定)할 수 있었으나 낮은 적합도(適合度)를 나타내었다.

  • PDF

편백나무 추출물을 함유한 다공성 필름 분석 (An Analysis of a Porous Film Containing $Chamaecyparis$ $obtusa$ Extract)

  • 김경이;이은경
    • 한국식품영양학회지
    • /
    • 제24권4호
    • /
    • pp.551-558
    • /
    • 2011
  • 본 연구는 식품의 신선도를 유지하기 위한 효과적인 식품 포장 물질로서 항균성질을 갖는 편백나무 추출물을 함유한 다공성 필름의 성능과 효능을 알아보고자 하였다. 나무가 갖는 특유의 향인 피톤치드 정유는 휘발성 화학물질로서, 항균성 기능을 가지고 있는 천연물질이다. Limonene은 편백나무 정유중의 한 성분으로 분해없이 증류되며, 효과적인 항균성분을 나타내는 한편 비교적 안정한 테르펜류이다. 피톤치드 정유를 함유한 효과적인 항균성 필름을 제조하기 위한 용매의 최적조건을 찾은 결과, T-500:에탄올:경화제의 비율이 5:20:0.3이었고, 최소 항균성을 나타내는 피톤치드 정유의 농도는 2%였다. 피톤치드는 기체상 접촉을 통한 적용법이 항곰팡이성 효과가 크게 나타난다. 피톤치드를 포함한 필름들이 A-50LF1, A-25SF2, B-50SF1, C-50LF1, C-25SF2, D-50SF1와 같이 여러가지 다른 조건으로 만들어졌고, $1{\ell}$ 반응기 안에서 저장기간에 따르는 limonene 성분을 얻기 위하여 GC-MSD 분석을 하였다. 그 결과, 항균층 폭이 25 mm, 길이 20 cm인 필름 2개를 사용했을 때가 항균층 50 mm, 길이 20 cm 필름 1개를 사용했을 때보다 밀폐된 반응기에 limonene이 더 많이 보유되어 있음을 알 수 있었다. 이 결과는 필름 제조 시 안쪽 필름의 20 ${\mu}m$의 기공 쪽보다 옆 단면 층과 층 사이의 기체 확산이 더 크게 일어난다는 것을 보여주었다. 필름 두께가 피톤치드 방출량에 미치는 영향은 필름이 두꺼울수록 초기에는 오히려 덜 방출되었으나, 하루가 지나면서 저장기간이 길어질수록 방출량이 증가하는 경향을 보였다. $35^{\circ}C$와 70% 습도 조건에서 14일 동안 식빵 저장 실험에서 곰팡이 유무를 확인한 결과, 작은 사이즈 2개를 넣었을 때가 큰 사이즈 1개를 넣었을 때보다 저장기간이 길게 나타났다. 신선도 유지성분인 편백 정유가 갖는 항균성분 중, limonene의 방출 특성과 조건을 분석함으로써 필름조건의 자료를 공유하여 향후 식품에 대한 적용 확대가 기대된다.

디지털미디어 환경(環境)에서 디자인 특성(特性)에 관한 연구(硏究) - 실내제품(室內製品) 디자인을 중심으로 - (A Destructive Method in the Connection of the Algorithm and Design in the Digital media - Centered on the Rapid Prototyping Systems of Product Design -)

  • 김석화
    • 조형예술학연구
    • /
    • 제5권
    • /
    • pp.87-129
    • /
    • 2003
  • The purpose of this thesis is to propose a new concept of design of the 21st century, on the basis of the study on the general signification of the structures and the signs of industrial product design, by examining the difference between modern and post-modern design, which is expected to lead the users to different design practice and interpretation of it. The starting point of this study is the different styles and patterns of 'Gestalt' in the post-modern design of the late 20th century from modern design - the factor of determination in industrial product design. That is to say, unlike functional and rational styles of modern product design, the late 20th century is based upon the pluralism characterized by complexity, synthetic and decorativeness. So far, most of the previous studies on design seem to have excluded visual aspects and usability, focused only on effective communication of design phenomena. These partial studies on design, blinded by phenomenal aspects, have resulted in failure to discover a principle of fundamental system. However, design varies according to the times; and the transformation of design is reflected in Design Pragnanz to constitute a new text of design. Therefore, it can be argued that Design Pragnanz serves as an essential factor under influence of the significance of text. In this thesis, therefore, I delve into analysis of the 20th century product design, in the light of Gestalt theory and Design Pragnanz, which have been functioning as the principle of the past design. For this study, I attempted to discover the fundamental elements in modern and post-modern designs, and to examine the formal structure of product design, the users' aesthetic preference and its semantics, from the integrative viewpoint. Also, with reference to history and theory of design my emphasis is more on fundamental visual phenomena than on structural analysis or process of visualization in product design, in order to examine the formal properties of modern and post-modern designs. Firstly, In Chapter 1, 'Issues and Background of the Study', I investigated the Gestalt theory and Design Pragnanz, on the premise of formal distinction between modern and post-modern designs. These theories are founded upon the discussion on visual perception of Gestalt in Germany in 1910's, in pursuit of the principle of perception centered around visual perception of human beings. In Chapter 2, I dealt with functionalism of modern design, as an advance preparation for the further study on the product design of the late 20th century. First of all, in Chapter 2-1, I examined the tendency of modern design focused on functionalism, which can be exemplified by the famous statement 'Form follows function'. Excluding all unessential elements in design - for example, decoration, this tendency has attained the position of the international style based on the spirit of Bauhause - universality and regularity - in search of geometric order, standardization and rationalization. In Chapter 2-2, I investigated the anthropological viewpoint that modern design started representing culture in a symbolic way including overall aspects of the society - politics, economics and ethics, and its criticism on functionalist design that aesthetic value is missing in exchange of excessive simplicity in style. Moreover, I examined the pluralist phenomena in post-modern design such as kitsch, eclecticism, reactionism, hi-tech and digital design, breaking away from functionalist purism of modern design. In Chapter 3, I analyzed Gestalt Pragnanz in design in a practical way, against the background of design trends. To begin with, I selected mass product design among those for the 20th century products as a target of analysis, highlighting representative styles in each category of the products. For this analysis, I adopted the theory of J. M Lehnhardt, who gradated in percentage the aesthetic and semantic levels of Pragnantz in design expression, and that of J. K. Grutter, who expressed it in a formula of M = O : C. I also employed eight units of dichotomies, according to the G. D. Birkhoff's aesthetic criteria, for the purpose of scientific classification of the degree of order and complexity in design; and I analyzed phenomenal aspects of design form represented in each unit. For Chapter 4, I executed a questionnaire about semiological phenomena of Design Pragnanz with 28 units of antonymous adjectives, based upon the research in the previous chapter. Then, I analyzed the process of signification of Design Pragnanz, founded on this research. Furthermore, the interpretation of the analysis served as an explanation to preference, through systematic analysis of Gestalt and Design Pragnanz in product design of the late 20th century. In Chapter 5, I determined the position of Design Pragnanz by integrating the analyses of Gestalt and Pragnanz in modern and post-modern designs In this process, 1 revealed the difference of each Design Pragnanz in formal respect, in order to suggest a vision of the future as a result, which will provide systemic and structural stimulation to current design.

  • PDF