• Proceedings of the Korea Information Processing Society Conference
• /
• 2007.05a
• /
• pp.1535-1537
• /
• 2007

A design pattern is a general solution to a commonly occurring problem. Design patterns have proven highly effective in representing, transferring, and applying the design knowledge in many engineering disciplines. However, these patterns have not addressed sensor network specifically. With a growth of sensors and sensor networks, and considering their profound applicability, there is a crucial need to articulate ones experience of application development or deployment of sensor nodes in the form of design patterns to avoid the future mistakes. This paper discusses the same issue and show applicability of design patterns in sensor networks.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.464-468
• /
• 2000

This paper presents the optimization technique to select the design parameters of a hydraulic servo valve using the genetic algorithm. The dynamic performance is governed by the design parameters of the servo valve and they may be select by repeated number of simulations such that the desired performance is obtained. Using the genetic algorithm to optimize the design parameters, effective method is suggested. This method can be used for the design of the hydraulic systems as well as the servo valve.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.2 s.75
• /
• pp.115-130
• /
• 2005

This paper presents the effects of indirect costs on Life-Cycle-Cost(LCC) effective optimum design of steel-box girder bridges. The LCC formulations considered in the LCC optimization of the bridges consist of initial cost and expected rehabilitation costs including repair/replacement costs, loss of contents or fatality and injury losses, and indirect costs such as road user costs and indirect socio-economic losses. To demonstrate the LCC-effectiveness for optimum design of the bridges, an actual steel box girder bridge having two continuous spans(2@50m=100m) is considered as a numerical example. And also, in this paper, various sensitivity analyses are performed to investigate the effects of indirect costs caused by traffic conditions such as number of detour route, number of lane on detour route, length of detour route, and traffic volumes on the LCC-effective optimum design. From the numerical investigations, it may be concluded that indirect costs caused by traffic network may sensitively influence on the LCC-effective optimum design of steel-box girder bridges. Therefore, it may be stated that the traffic conditions should be considered as one of the important items in the LCC-effective optimum design of the bridges.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.11 no.2
• /
• pp.13-19
• /
• 2011

Starting in modern times by Le Corbusier, architectures made by concretes are still developing in these times. For several decades, the shape of box architecture has been the most familiar type of buildings. Of course "The concrete is the type of box building" isn't always right, but what we have most seen was the buildings which has been stylized and made by concretes. Through modern times to these days based on international style and functionalism, the type of box building was the most effective and good profit type of architecture which has not disregarded the capitalism. Free-form building are becoming a common place, and many of these are designed and constructed using sophisticated techniques. The main technique being used is Generative Technology of Form for free-form construction. People's interest is growing in this, and it is becoming widely used both abroad and domestically. The purpose of this paper is to investigate the use of Generative Technology of Form which is a digitally adapted design methodology in architecture. The digital design process used for contemporary buildings share many typical features that exist within a standard digital template, but also an increasing amount of mass customization that has to be produced at an additional cost. This paper will summarize these features in terms of free-form architecture, and in terms of the digital design process. In fact, 3D models have to be conceded as main design products considering features of Free Form Design Architecture. However it is practical to design twice over, because all forms of architectural drawings are 2D. From now on, design of Free Form Design Building is not to separate between design process and practical process, but to compound them as unified design system applied the process to communicate information interactively. For this, it should be required to impose unified digital design process and perform researches about effective way to apply in the field of Free-form Design Architecture.

• Archives of design research
• /
• v.15 no.2
• /
• pp.81-90
• /
• 2002

Designer creates new design alternatives using acquisition of visual information in design process. Which is more effectiveness to acquire in directive visual information or in-directive visual information\ulcorner In this research we would like to find out that the relation of character in visual information and design alternatives. So to A subjects, we give them to see directive visual information to make visual mental imagery, to B subjects, we give them to see in-directive visual information to make it. In this experiment they must crate telephone design. C subjects must evaluate this design alternatives by questions composing scale in distinction and elegant. After a experimentation, It is true that we make hypothesis that distinct two subjects in distinction and elegant. Though elegant is opposite with hypothesis. So to make elegant design. it is import to concentrate cognitive ability. Accordingly it proves that in-directive visual information is effective for new type design stage in design process and directive visual information is effective for new style design stage in design process.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.3
• /
• pp.61-69
• /
• 2001

This paper presents a case of community participatory neighborhood park design. The site, Yangji park, is located in Sandang-dong, Dongjak-gu, Seoul and the area is about 1,870m. Neighborhood park is defined as an outdoor space which is close to people´s home and is considered to be their own, because of the residents´ collective responsibility, family association, and frequent shared use. It is a place for pleasant rest area for community, sharing a sense of nature and retaining a sense of tradition and culture which is disappearing in a city. It is related to the daily life of the people near the site and becomes a place to let the community increase dialogue and understanding between people. On the other hand, participatory design is a design in which people participate in the design process. Thus people can understand the project well, present their opinions better, and reconcile conflicts between the different interests of people. This design applied a community participatory design method to design a neighborhood park. The major strategies for participatory design were ´workshop´, ´card game´, ´walking site´, ´interview´, and ´questionnaire´. Eight workshops were performed for the participation design. The major spaces and facilities elected by participants were the ´main entrance plaza´, ´entrance symbol space´, ´children´s ´playground´, ´multipurpose sport ground´, ´grass land´, ´foot-pressure area´, ´spaces symbolizing a rock mountain and an old well´, ´space for youth´, ´a pavilion´, etc. From this selection, design concept alternatives were generated by participants. The aster plan was developed from these design alternatives with the help of landscape architects. It was revised by ist visits and community discussions. People were also involved in the construction process and left their own works, such as hand prints, on the site. After construction, residents continued to maintain the park by themselves. As a result, It was found that participatory design was very effective for people´s satisfaction and sustainable park management. By involving people more in the process they developed a sense of community, a sense of ownership, and attachment to the place. In conclusion, it is suggested that we need to develop an effective people´s participation method to Korean society.

• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2174-2183
• /
• 2021

Helium cooled solid breeder blanket as an important blanket candidate of the Tokamak fusion reactor uses ceramic pebble bed for tritium breeding. Considering the poor effective thermal conductivity of the ceramic breeder pebble bed, thin structure of tritium breeder pebble bed is usually adopted in the blanket design. The container wall has a great influence on the thin pebble bed packing structure, especially for the assembly of mono-sized particles, and thin pebble bed will appear anisotropic effective thermal conductivity phenomenon. In this paper, thin ceramic pebble beds composed of 1 mm diameter Li₄SiO₄ particles are generated by the EDEM 2.7. The effective thermal conductivity of different thickness pebble beds in the three-dimensional directions are analyzed by three-dimensional thermal network method. It is observed that thin Li₄SiO₄ pebble bed showing anisotropic effective thermal conductivity under the practical design size. Normally, the effective thermal conductivity along the bed vertical direction is higher than the horizontal direction due to the gravity effect. As the thickness increases from 10 mm to 40 mm, the effective thermal conductivity of the pebble bed gradually increases.

• Archives of design research
• /
• v.16 no.4
• /
• pp.47-58
• /
• 2003

Introduction of rich media is influencing strategy, planning, and design field of internet advertising. Although past studios had suggested that using rich media in internet advertising is effective in building higher brand recognition, there has been little research on specific design factors of rich media advertising. Therefore, the purpose of this study is to analyze the effectiveness of design factors for brand recognition. The result of this study suggests that illustrated image was more effective than photo images for higher brand recognition. Also, sound with narration resulted in higher brand recognition than in the case of only sound.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.1
• /
• pp.8-17
• /
• 2008

Putting a high value on individual preferences is a modern trend that more and more companies are considering for their product design and development and the apartment design is not an exception. Most apartments today are built using similar design with no room for customization. People in general want their tastes to be reflected in the design of their apartment. However, delivering what customers like to the construction company may not be an easy task in practice. For this reason, an intuitive and effective medium between the company and customers for effective communication is needed to ameliorate such a difficulty and in response to this necessity, we developed a test platform for the virtual model house which provides a user with the customization of the apartment using haptic interactions. In our virtual environment, a user can explore an apartment and change the interior based on their taste and feel through intuitive haptic interactions.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.3
• /
• pp.573-577
• /
• 2009

Piezoresistive pressure sensor have become the successfully-commercialized MEMS product and the related technologies have been well developed over the past decades. Regarding the design methodology, however, the coupled-physics FEM analyses of the transducer itself and the signal-processing circuitry design based on the conventional EDA are separated and both of the analyses were sequentially processed for the full design of the pressure sensor. For the fast and effective R&D, new design methodology is proposed in this paper where the FEM results are linked to the EDA environment and therefore most of the design works can be done in the EDA environments, which means the time-consuming FEM analyses can be minimized. In order to verify the proposed approach, a typical piezoresistive pressure sensor having the silicon diaphragm and piezoresistors was modeled and analyzed based on the proposed methodology. The verification results showed that the simulated results were matched well with the measured data within the 7% difference while the simulation time was reduced less than 5% compared to the conventional methodology. Through the proposed approach, various types of the piezoresistive pressure sensors can be developed in more effective way.