• Applied Chemistry for Engineering
• /
• v.17 no.1
• /
• pp.28-32
• /
• 2006

This study investigated the variation of flow rates in microchannels that consisted of polydimethyl siloxane (PDMS) and glass using various external voltages. Three different microchannel widths and two different depths. PDMS and negative photoresist (SU-8) were used to make the microchannels by the soft lithographic method. For each depth of microchannel ($50{\mu}m$ and $100{\mu}m$), three different widths ($100{\mu}m$, $200{\mu}m$ and $300{\mu}m$) were made. In each case, several different external voltages were applied (0.3 kV, 0.35 kV, 0.4 kV and 0.45 kV) to examine the flow rates. Our results indicated that flow rate increased with an increase of the external voltage at the same microchannel width. This was because the electrical field was increased as the external voltage increased. For the same external voltage, the flow rate increased as the microchannel's width increased. These results showed that the resistance in the microchannel decreased as the microchannel's width increased. Also, to investigate the effect of microchannel's depth and width, the cross-sectional area of the microchannel was increased to the double in area. As a result, the effect of the microchannel's depth was higher at a low external voltage, and the effect of the microchannel's width was higher at a high external voltage.

• Journal of Biosystems Engineering
• /
• v.5 no.1
• /
• pp.58-65
• /
• 1980

Sinkage differences between the wheels of a transplanter which are caused by the different hard pan of fields and land preparation affect the field performance of a rice transplanter. In this experiment the relationships between the sinkage differences of the wheels of a transplanter and the planting distance, planting angle, planting depth and deviation from a straight transplanting line were investigated. The objective of this experiment was to obtain some basic informations for the effective use of the rice transplanter . The results of this experiment are as follows. 1. Transplanting distance became shorter as the sinkage differences increased. This effect was greater on the side of the transplanter with a shallower sinkage. 2. The depth of transplanting increased as the differences in the depth of sinkage increase for the side with the deeper sinkage. An opposite trend was observed for the side with shallower sinkage. 3. The angle of transplanted seedlings from the vertical portion increased slightly as the sinkage differences increased. The variation in results were greater from the side of the transplanter with deeper sinkage than with shallower sinkage. 5. The best postures of planted seedling were found when the water depth was 3 cm for the side of transplanter with deeper sinkage and 4 cm for the shallower sinkage side. The relationships between the postures of planted seedling and water depth. , or $y=67.62 + 10.69x-1.76x^2$ for the side of transplanter with deeper sinkage and $y=66.64+11.62x-1.50x^2$ for the side with shallower sinkage, were found from this experiment.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.9
• /
• pp.1371-1377
• /
• 2002

During a 5-yr period, 1994-1998, pre-weaning and weaning data were collected on 591 calves produced by mating either straightbred Jersey, straightbred Limousin or $F_1$ (Limousin${\times}$Jersey) bulls to mature purebred Jersey or Limousin cows. Traits recorded included birth and weaning weight, height, length, girth, fat depth and a measure of muscle (ratio of stifle to hip width expressed as a percentage). All traits were analyzed assuming a model with sire and dam random effects that included effects of year and date of birth, sex, breed and year${\times}$sex interaction. Main effects were generally significant with few exceptions. Direct genetic effects were large for weight, height, girth and muscle with a breed trend from purebred Jersey (small) to purebred Limousin (large). At weaning, the maternal effect of the Jersey dam was positive for weight (10.9${\pm}$4.9 kg), girth (3.7${\pm}$1.0 cm) and muscle (6.0${\pm}$0.9%). Heterosis was highly significant and positive only for fat depth (1.5${\pm}$0.2 mm) with the $F_1$ progeny being the fattest, followed by the backcrosses, then purebred Jersey and purebred Limousin. Also, significant (p<0.001) but negative heterosis was observed for weight, girth and muscle. The change in ranking for fat depth relative to other traits is a reflection of the large heterotic effects relative to direct effects on fat depth. Epistatic effects were not significant on any trait at birth or weaning. This study has indicated the possibility of exploiting the positive heterotic and maternal effects for fat depth and muscularity to meet specific meat quality and quantity demand by consumers.

• Tunnel and Underground Space
• /
• v.13 no.2
• /
• pp.153-168
• /
• 2003

The objective of this present study is to understand long term(500 years) thermohydromechanical interaction behavior in the vicinity of a repository cavern on the joint location and repository depth variations. The model includes a saturated discontinuous granitic rock mass, PWR spent nuclear fuel in a disposal canister surrounded with compacted bentonite inside a deposition hole, and mixed bentonite backfilled in the rest of the space within a repository cavern. It is assumed that two joint sets exist within the model. Joint set 1 includes joints of 56$^{\circ}$ dip angle, spaced at 20 m, and joint set 2 is in the perpendicular direction to joint set 1 and includes joints of 34$^{\circ}$ dip angle, spaced at 20 m. In order to understand the behavior change on the joint location variations, 5 different models of 500m in depth are analyzed, and additional 3 different models of 1000 m in depth are analyzed to understand the effect of depth variation.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2008.04a
• /
• pp.90-94
• /
• 2008

This study suggested a section of a new module that will allow for applying a large section in order to solve the technical difficulties mentioned above and to secure low stiffness of FRP, developed a new FRP + concrete composite girder that is filled with the appropriate amount of concrete. To identify the structural behavior of this FRP + concrete composite girder, experiments were conducted to measure its shear strength according to the difference in the strength of confined concrete and variation of the shear span to depth. The results of the shear strength test confirmed the composite effect from confining concrete and the effect of increase in strength proportional to the strength of concrete.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.10 no.4
• /
• pp.1-7
• /
• 2014

This paper is performed to investigate of cooling effect and total enthalpy variation on EAHES(Earth-to-Air Heat Exchanger System) that is buried 3m depth and 60m length. Using EAHES, the reduction of the sensible heat is obviously but latent heat is showed increased trend. Although the outdoor average latent heat accounts for 53.2% of total enthalpy, latent heat of the exit air from EAHES was raised as 58%. For improving cooling effect of EAHES, it has to considered that how to remove the latent heat from EAHES.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.3
• /
• pp.101-109
• /
• 2007

In South Korea, many weathered soil slopes are composed of soil mixtures with certain amount of clay fractions in natural soil deposits. Accordingly, it is very important to analyze that effect of the fines on the stability of unsaturated soil slopes. In this study, five different soil types classified by mixture portion of fines were used and experiment on the soil-water characteristic curve tests (SWCC) using GCTS (Geotechnical Consulting and Testing Systems) pressure plate were performed in order to analyze the stability of unsaturated soil slopes. Based on the infiltration analysis which contains SWCC test result by the SEEP/W, it is shown that the increasing rate of the wetting band depth was decreased as the fines content and the relative density were increased. According to the stability analysis result of the unsaturated soil slopes through the SLOPE/W, it is found that the transition from the wetting band depth to the variation of strength parameters which affect the stability of unsaturated soil slopes appears to occur around $10\sim15%$ of clay contents in the mixtures.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.161-167
• /
• 2022

Ocean waves passing through the underwater bar at a shallow depth experience a shoaling effect caused by decreasing water depth, a nonlinear interaction therein owing to steepening wave slope, and a wave dispersion effect as the water depth increases again. Because this problem includes many complicated phenomena, it is used as a good example of validating a theoretical development or a CFD method for ocean wave applications. Validation is performed mainly for regular waves by comparing the wave elevation patterns in the time domain with the experimental results. In this study, the spectral evolution of wave spectrum is investigated in the frequency domain when a CFD method such as OpenFOAM is applied for this problem. In particular, the effects of initial phase conditions as well as the nonlinear interaction among harmonic waves are studied.

• Atmosphere
• /
• v.15 no.4
• /
• pp.229-239
• /
• 2005

The effect of inversion layer on the land and sea breeze near the Gangneung city was investigated. The land and sea breeze occurrence days were selected, and the height and the intensity of inversion layer were calculated with the upper air observational data of the Sokcho Station. The relationships between the temperature variation near the Gangneung and the inflow time, inland penetration and the inflow depth of the land and sea breeze were also analyzed. And the Gangwon Short-range prediction system was verified with the comparison of surface stream line by the Gangwon short-range prediction system with the AWS wind vector data. It was revealed that the inversion layer tended to block the sea breeze, shorten the inland penetration distance and lower the inflow depth, causing the temperature rise. The comparison and analysis of surface steam line by the Gangwon short-range prediction system and the AWS wind vector showed that the system quite well simulated the sea breeze, thus the system could be well utilized in the prediction of land and sea breeze.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.6
• /
• pp.621-629
• /
• 2019

A logical measure is suggested to estimate an accurate Sound Speed Profile (SSP) for the unusual variation of salinity in the Yellow Sea. Based on National Aeronautics and Space Administration (NASA)'s Aqua and Soil Moisture Active Passive (SMAP) satellite data, this measure identifies the area of temperature inversion effect and expansion of low salinity (<30.5 psu) water. Subsequently, on the area, the Conductivity, Temperature, and Depth (CTD) mounted unmanned maritime system estimates accurate SSP. In order to carry out this measure conveniently, a flow chart is demonstrated in this research. By using this measure which finds the high variational salinity area, the inaccuracy issue for calculating SSP from Expandable Bathy Thermograph (XBT) is expected to be solved.