• Korean Journal of Organic Agriculture
• /
• v.19 no.4
• /
• pp.501-511
• /
• 2011

This study was carried out to evaluate the effect of applying levels of Bestamin, animal amino acid, on growth and quality of hot pepper and physicochemical properties of soil. Treatment was given with 200, 400, 800, 1600kg per 10a to control of Bestamin, difference of physicochemical properties was lower than Bestamin, and $P_2O_5$ seems to be reduced, also $K^+$, $Ca^{++}$ were obviously low compared to the control. The content of $NO_{3-}N$ was low compared to control at the Bestamin treated plot. Plant height was longest at 800 treatment and main stem length, main stem weigh and the number of leaves were significantly different with 400 and 800 treatment. No difference was found among the fruit weight, length, diameter in first harvest, but there was significantly different at control of 2nd, 3rd harvest and more increased than 400 and 800 treatment. Fruit weight per plant was the heaviest at 400 and 800 treatment, and the number of fruit was no difference at red pepper but increased with 400 and 800 at green pepper, and yield per 10a was significantly increased to 4503.6kg and 4582.5kg, respectively. Nitrogen in mesophyll accumulation content was obviously reduced at Bestamin treatment compared to control, and amino acid was reduced with control.

• Tribology and Lubricants
• /
• v.30 no.5
• /
• pp.284-290
• /
• 2014

The influence of round embossed surface on slider bearing characteristics and its load carrying capacity is discussed for thin film effect of embossed slider bearing. For the numerical computation of lubrication parameters such as pressure, load capacity and shear stress that are normalized and a Reynolds equation is used for the analysis of embossed slider bearing characteristics. For this purpose, the finite difference method of central difference scheme is used in this study. In a slider bearing with embossed form, several simulation parameters such as pressure, load capacity and shear stress of the bearing can be obtained according to independent parameters such as the slope of the slider bearing and number of embossing in the upper slider. Also this results can be summarized and be stored in sequential data file for latter analysis. After all, their distribution of the pressure and shear stress parameters can be displayed and be analyzed easily by using the developed program with matlab GUI technique. The independent parameters such as a number of embossing and a slope of the embossed surface slider are used for discussing simulation parameters of pressure distribution, shear stress and load carrying capacity of the round embossing. These study results reported in this paper should be applied to the other shaped slider bearing with a rectangular embossed surface or rectangular waved surface.

• Restorative Dentistry and Endodontics
• /
• v.15 no.2
• /
• pp.127-133
• /
• 1990

Electronic working length determination is based on the electrical impedence between the root canal and the periodontal ligament Different canal irrigants with different electric conductivity may effect on the accuracy of the electronic mechanism. 0.9% Saline, 2.5% NaOCl and 3% $H_2O_2$ were evaluated either in wet or in dry condition. The results were as follows. 1. The electrical resistance mearured by Impedence Meter (Model #253, portland, USA) were 1 $K{\Omega}$ in 0.9% Saline, 0.1$K{\Omega}$ in 2.5% NaOCl and 48 $K{\Omega}$ in 3% $H_2O_2$. 2. Saline measured -0.57mm from the actual canal length and had significant difference. When dried with paper points, however, it measured -0.25mm demonstrating no statistical difference. 3. 2.5% NaOCl measured -4.07mm in wet and -2.26mm in dry condition and both showed significant difference from the actual canal length. 4. 3% $H_2O_2$ measured +0.02mm in wet and -0.09mm in dry canals and both appeared to be within acceptable range for the electronic working length mechanism.

• Journal of Korean Home Economics Education Association
• /
• v.5 no.1
• /
• pp.143-152
• /
• 1993

The purposes of this study were to compare the learning effects of CAI and traditional instruction method in the Home Economics class of middle school and to examine the difference of learning effect between CAI group and traditional instruction group according to ability level. The research findings are as follows: 1.$\circled1$As a result of the post test, CAI group showed significantly higher scores on academic achievement than those of traditional instruction group(p<.05). $\circled2$As a result of the retention test, CAI group showed higher scores than those of traditional instruction group, but statistically the difference is not so significant. 2. $\circled1$Higher group in pre-test score of CAI group showed higher scores in post-test and retention test than those of traditional instruction group, but statistically the difference is not so significant. $\circled2$Lower group in pretest score of CAI group showed significantly higher academic achievements than those of traditional instruction group(p<.05). $\circled3$Higher group in IQ test score of CAI group did not show significantly higher academic achievements than those of traditional instruction group. $\circled4$Lower group in IQ test score of CAI group showed significantly higher academic achievements than those of traditional instruction group(p<.05)

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.54 no.3
• /
• pp.148-155
• /
• 2005

A seam-line determination algorithm is proposed to determine image border-line in mosaicing using the transformation of gray value differences and dynamic programming. Since visually good border-line is the one along which pixel differences are as small as possible, it can be determined in association with an optimal path finding algorithm. A well-known effective optimal path finding algorithm is the Dynamic Programming (DP). Direct application of the dynamic programming to the seam-line determination causes the distance effect, in which seam-line is affected by its length as well as the gray value difference. In this paper, an adaptive cost transform algorithm with which the distance effect is suppressed is proposed in order to utilize the dynamic programming on the transformed pixel difference space. Also, a figure of merit which is the summation of fixed number of the biggest pixel difference on the seam-line (SFBPD) is suggested as an evaluation measure of seamlines. The performance of the proposed algorithm has been tested in both quantitively and visually on various kinds of images.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.7C
• /
• pp.608-615
• /
• 2007

Generally time of arrival (TOA) information via two way communications can be derived by accurate round trip time (RTT) between two devices. However, response time demanded in RTT measurement is long, a serious TOA error is caused by each different clock drift between two devices. In order to solve this problem, we propose the TOA and time difference of arrival (TDOA) estimation scheme with mitigating clock drift effect. To verify the performance of proposed method, we compared the proposed scheme with one way based TDOA acquisition method introduced by IEEE 802.15.4a Task Group and then we could conclude that the proposed method has better performance over other methods.

• Journal of the Korea Safety Management & Science
• /
• v.15 no.1
• /
• pp.271-281
• /
• 2013

In the trend toward globalization, cross-cultural teams in organizations are becoming more and more common. In particular, the influence of China and Western Europe on the global economy is getting increased. With this trend, it is important to understand cross-cultural characteristics for group decision making in managerial environments. This study aims at analyzing cross-cultural differences between China and Western Europe in light of the effect of group discussion in group decision making. An experiment simulating a decision of a car purchase was conducted. A total of 48 subjects (24 Chinese and 24 Western Europeans) assigned in decision groups were asked to judge relative importance ratios of nine factors affecting their purchase decisions using the AHP program developed for the experiment. Three dependent variables (consistency, satisfaction, and consensus) were measured. Chinese were slightly more consistent than Western Europeans in discussion-involved group decision making. In terms of decision satisfaction, Western Europeans were more satisfied with discussion-included decisions than discussion-excluded decisions. Chinese, on the contrary, did not show a significant difference. There was no significant difference between two cultures in decision consensus.

• The Journal of Korean Physical Therapy
• /
• v.7 no.1
• /
• pp.33-42
• /
• 1995

The purposes of this study were 1) to compare weight distribution and ratio of the extremities between normal and hemiplegic children in quadruped position and 2) to compare the effect of ATNR on weight bearing of the extremities between normal and hemiplegic children. The subjects fer the study were 48 children(24 normal, 24 hemiplegic) between the ages 3 to 6. They were teated weight distribution and ratio of the extremities in the neutral position of head and by passive right and left rotation of the head in the quadruped position. The data wert analized by paired t-test. The results were as follows: 1. In the neutral position of head, normal group was not difference on weight distribution and ratio of the extremities and hemiplegic group was more weight bearing on the sound upper extremity than the affected upper extremity(p<.01). 2. When the head rotated to the dominant side or sound side passively, there was not a significant difference between normal and hemiplegic group. 3. When the head rotated to the nondominant side or affected side passively, there was a significant difference between nondominant upper extremity nf normal and affected upper extremity of hemiplegic group(p<.05).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.12
• /
• pp.24-28
• /
• 2000

This paper reports a new calculation method of three dimensional deposeition rate by level set method. To model an advancement of the surface efficiently, we have developed a new iteration method to re-initialize the level set function. For calculating etching and deposition rate by direct flow, we have developed a visibility test module and a refraction and re-sputtering model. Sputter deposition rate with shadow effect and surface refraction is calculated. We report that difference of profiles in cases that sticking coefficient are 1.0 and 0.3. We report that the difference of the deposition rate on bottom of the hole is caused by a difference of visible angle by the shadowing effect.

• Journal of Korean Medicine Rehabilitation
• /
• v.18 no.3
• /
• pp.81-90
• /
• 2008

Objectives : The purpose of this study was to identify the effect of electro-acupuncture stimulation regarding restoration of range of motion on patients with frozen shoulder. Methods : Experimental group measured with shoulder flexion and abduction angle at pre and post electro-acupuncture stimulation. Results : There were statistically significant difference regarding change of flexion angle of electro-acupuncture stimulation(p<0.01) and the testing value of all levels had a significant difference with the value of final post-test(p<0.01). There were statistically significant difference regarding change of abduction angle of electro-acupuncture stimulation(p<0.01). Conclusions : Electro-acupuncture stimulation of distal part increased range of motion of frozen shoulder. Therefore, application of electro-acupuncture should be developed as a therapeutic method in treatment of frozen shoulder. Also, it can contribute as one of good therapeutic methods offered to patients through approach of oriental rehabilitation medicine.