• 소성∙가공
• /
• 제8권2호
• /
• pp.208-215
• /
• 1999

To increase rolling yields by minimizing trimming losses of hot-rolled plate, optimization logic for the edger model has been developed. The logic to determine optimum edging amount model has been formulated on the basis of actual production rolling data. In case of broadside rolling, the fish tail shape at the sides of plate was better for reducing the crop loss and this could be achieved when the edging amount of broadside rolling was increased. At a given broadside rolling ratio, methodology to determine optimum edging amount for the finish rolling which could minimize the width deviation of plate were systematically derived. Therefore, for a given broadside rolling condition and the permissible tolerance in width deviation of plate, it was possible to optimize the edging amount in finish rolling to maximize rolling yields. The application of optimization logic in this study increased rolling yields from approximately 10% to 30% at various longitudinal eding raitos.

• 한국운동역학회지
• /
• 제27권2호
• /
• pp.91-97
• /
• 2017

Objective: To investigate rotation movement of segment for performing each position and its effect on knee/hip angulation, COM inclination, and edging angle changes. Method: Twelve Alpine skiers (age: $25.8{\pm}4.8years$, height: $173.8{\pm}5.9cm$, weight: $71.4{\pm}7.4kg$, length of career: $9.9{\pm}4.6years$) participated in this study. Each skier was asked to perform counter-rotation, neutral, and rotation positions. Results: Shank and thigh were less rotated in the counter-rotation position than in other positions, whereas the trunk and pelvis were more counter-rotated (p<.05). Hip angulation, COM inclination, and edging angle were significantly greater in the counter-rotation position than in other positions (p<.05). Conclusion: Our finding proved that the counter-rotation position increases hip angulation, COM inclination, and edging angle. Consequently, we suggest that skiers should perform counter-rotation of the trunk and pelvis relative to the ski direction in the vertical axis for the counter-rotation position. Further analysis will continue to investigate the effects of the counter-rotation position in real ski slope with kinetic analysis.

• 한국안광학회지
• /
• 제16권2호
• /
• pp.107-115
• /
• 2011

목적: 안경렌즈 조제가공을 위한 보급형 전자동 옥습기 개발을 위해 설계하고 제작하고자 한다. 방법: 보급형 전자동 옥습기의 주요 설계도를 캐드로 그려서 제작에 필요한 정보를 얻었다. 이 데이터를 기본으로 보급형 자동옥습기 개발을 위해 시제품을 제작 하였다. 결과: 무패턴 모드는 외부 자동 취형기에서 안경테의 렌즈삽입부 정보를 RS232C 전송방식으로 형판 없이도 작동할 수 있었고, 패턴 모드는 형판을 이용해서 개발품의 좌측에 장착하여 작동할 수 있었다. 보급형 자동옥습기는 헤드부, 오토암부, 형판고정부 그리고 연삭부와 같은 주요 요소들로 구성되었다. 헤드부는 좌우모터와 상하모터의 작동을 이용하여 안경렌즈의 연삭을 제어하였다. 연삭부는 유리 재질, 플라스틱 재질, V-홈 그리고 광택을 낼 수 있는 연삭휠로 구성하였다. 슬라이드는 고정된 형판의 하부에 구비되었고, 고정 샤프트에 의해 회전되는 형판이 슬라이드부에 의해 지지할 수 있었다. 형판고정부는 안경사의 수동적인 조작에 의해 헤드파트를 승강 및 좌우 이동시킬 수 있게 하였다. 연삭휠의 분당 회전수를 3,600 rpm으로 최적화 하였다. 결론: 패턴리스와 패턴 렌즈 가공이 가능한 보급형 자동옥습기를 설계 및 제작하여 시제품 제작에 성공하였다. 최소의 비용으로 효율적이고 간편하게 조제가공이 가능하여 안경사들에게 큰 도움이 될 수 있을 것으로 예상된다.

• 대한기계학회논문집
• /
• 제16권7호
• /
• pp.1278-1284
• /
• 1992

본 연구에서는 무전단 후판압연기술을 위한 요소기술로써 지난호에 게재한 오버랩연구에 이어 모델압연 실험과 유한요소 해석을 이용한 에징시 비정상부의 폭변 형거동에 대한 연구결과를 보고한다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.429-437
• /
• 1999

Width variation of the top and bottom ends of steel at finishing rolling in a plate, has been investigated. It was found that width variation after finishing rolling is affected by edging, broadside rolling ratio, longitudinal rolling ratio, width shape after broadside rolling, temperature, width-to-thickness ratio, and so on. A neural network modelling of back propagation has been conducted on the width variation during rolling. Based on these prediction models, a width control system, by which the roll opening and closing of the hydraulic AWC edger can be adjusted during edge rolling in finishing rolling passes, has been developed. Compared to conventional width model, the neural network model is much accurate in a model. The width control system is applied to a newly built production mill.

• 한국운동역학회지
• /
• 제26권4호
• /
• pp.361-367
• /
• 2016

Objective: The aim of this study was to compare three-dimensional kinematic changes of the lower extremity between the two different braking distances during snowplow in alpine skiing. Method: Six alpine ski instructors (age: $25.3{\pm}1.5yr$, height: $169.3{\pm}2.9cm$, weight: $66.2{\pm}5.9kg$, career: $4.2{\pm}2.9yr$) participated in this study. Each skier was asked to perform snowplow on the two different braking distances (2 and 4 m). Results: Snowplow and edging angles (p = .006 and p = .005), ankle adduction and inversion (p = .033 and p = .002), knee extension (p = .003), and hip abduction and internal rotation (p = .043 and p = .006) were significantly greater in the 2 m than in the 4 m braking distance. Conclusion: Based on our results, we suggest that skiers should make greater snowplow and edging angles on the shorter braking distance. In this situation, ankle joint adduction/inversion angle and hip joint internal-rotation make greater snowplow angle, and hip joint abduction make greater edging angle. In addition, greater knee joint extension angle may lead to more posteriorly positioned center of mass.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.327-327
• /
• 2000

Derivation of a slab dimension from the desired tolerance degrades the product quality, resulting in significant yield loss by trimming. This necessitates the dimensional control system to be operated in tighter dimensional accuracy. This paper presents an integral approach to a dimensional control system design taking into account the interaction between the edging process and the gap rolling process. To investigate the effects of each process controller, a simple PID controller is adopted as a preliminary study. The control performance is analyzed in detail in terms of the system response accuracy for various operating conditions.

• 한국환경과학회지
• /
• 제22권2호
• /
• pp.131-138
• /
• 2013

In order to provide a scientific foundation for herb application in landscape, the photographs were taken from the herb landscape in urban green space and sightseeing garden. The questionnaire-based survey was also applied to analyze the cognitive situation of herb. Most investigators love herb, but have a low level of herb; Interviewees' consideration of herb function lie in ornamental, healthcare and medical treatment; The bulk of the visitors think herb landscape is insufficient; Investigators' preferences for herb application forms are landscape edging and combining with stone. We also probe into the optimum allocation form combining herb with landscape elements. When we combine herb with landscape water or landscape architecture, artistic conception and reasonable plant allocation should be considered; When we combine herb with landscape path or garden ornament, reasonable plant disposition and appearance and practical collocation should be thought over; When we combine herb with flower-border, richly colored landscape and reasonable plant allocation should be deliberated on.

• 한국관광식음료학회지:관광식음료경영연구
• /
• 제12권1호
• /
• pp.57-78
• /
• 2001

The propose of this study is to explore Internet business models of tourism-related business and to research ]edging product agents focused on the company \"T\". The procedure for this study is as follows: 1) Study literature review about the Internet business models of tourism-related business 2) Characterize the lodging product agents 3) Analyze the Internet business model of the agent \"T\" based upon preview studies 4) Suggest the future study of this field.study of this field.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 제3회 압연심포지엄 논문집 압연기술의 미래개척 (Exploitation of Future Rolling Technologies)
• /
• pp.438-446
• /
• 1999

Crop minimization of the top and bottom ends of hot rolled plate, in a plate, in a plate mill, has been investigated. The existing model to determine the edging pattern at the finishing rolling pass was not reasonable to get high width accuracy and rolling yields. New models including width prediction have been formulated by using neural network model of back propagation learning algorithm and statistical analysis based on the actual production rolling data to give the optimal pattern for minimizing trimming loss. Using these models, at a given rolling condition of broadside pass and finishing pass and the permissible condition of width variation, it was possible to minimize crip at the top and bottom ends according to optimum procedure in plate mill. An application to improve the plan view pattern reduced width variation by 23% and crop length by 30% on average with an effective fishtail crop shape.