• Composites Research
• /
• v.12 no.3
• /
• pp.17-25
• /
• 1999

In this paper, we present the analytical study results of buckling behavior of elastically restrained orthotropic plates. In the study the boundary conditions of the plate are simply supported at all four edges and elastically restrained by the elastic medium at opposite two longitudinal edges. The energy method is employed in the solution of the problems in which method the buckling coefficient is calculated from the condition that the work-done by the external forces during buckling is equal to the stored elastic strain energy. The results are presented in the graphical from. The equations derived for the orthotropic plate in this study are compared with existing isotropic ones and identical results were observed.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.161-165
• /
• 2001

End milling is one of the most widely used machining operations. It is associated with productivity and production quality progress. In metal cutting with up and down milling, moment is important factor to diagnose the cutting characteristics because the amount of tool wear directly influences the moment. In this study, the effects of number of milling cutting edges on the cutting performance, especially on the moment, are investigated. The results acquired through the cutting test measuring moment show that up milling is superior to down milling.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.12
• /
• pp.1725-1736
• /
• 2002

We describe a characteristic behavior of edge signal intensity, the strictly monotonic variation of intensity across edges and propose a new algorithm for edge detection based on it. We define an extended directional derivatives, which is nonlocal and beyond scaling in the pixel space, to describe that the algorithm is adaptive to the various widths of edges and relevant as an optimal edge detection algorithm. As an industrial application of the algorithm, we discuss a simple computer vision procedure for an example of visual inspection.

• Journal of the Korean Mathematical Society
• /
• v.49 no.3
• /
• pp.493-502
• /
• 2012

In this article, we give a characterization theorem for a class of corank-1 Butler groups of the form $\mathcal{G}$($A_1$, ${\ldots}$, $A_n$). In particular, two groups $G$ and $H$ are quasi-isomorphic if and only if there is a label-preserving bijection ${\phi}$ from the edges of $T$ to the edges of $U$ such that $S$ is a circuit in T if and only if ${\phi}(S)$ is a circuit in $U$, where $T$, $U$ are quasi-representing graphs for $G$, $H$ respectively.

• Journal of Korea Multimedia Society
• /
• v.18 no.10
• /
• pp.1216-1224
• /
• 2015

In this paper, a detection algorithm for the removal of needle in oriental clinic is presented. First, in the proposed method, the candidate areas of each needle penetrated are selected by using the RGB color information of needle head, and the false candidates are removed by considering their area size. Next, two main edges of the needle are extracted through using the edges of selected candidate areas and their radon transformation. The final verification of penetrated needle is accomplished by using the morphological analysis of these two edge lines. In the experiments, the detection rate of proposed method reaches to 99% for the 36 images containing 294 needles.

• Journal of the Korean Mathematical Society
• /
• v.51 no.5
• /
• pp.919-940
• /
• 2014

We conjecture that if $k{\geq}2$ is an integer and G is a graph of order n with minimum degree at least (n+2k)/2, then for any k independent edges $e_1$, ${\cdots}$, $e_k$ in G and for any integer partition $n=n_1+{\cdots}+n_k$ with $n_i{\geq}4(1{\leq}i{\leq}k)$, G has k disjoint cycles $C_1$, ${\cdots}$, $C_k$ of orders $n_1$, ${\cdots}$, $n_k$, respectively, such that $C_i$ passes through $e_i$ for all $1{\leq}i{\leq}k$. We show that this conjecture is true for the case k = 2. The minimum degree condition is sharp in general.

• Proceedings of the KOSOMBE Conference
• /
• v.1990 no.11
• /
• pp.29-32
• /
• 1990

The method for enhancing the edges from medical images is described. The various methods are tested for the medical Images contaminated by noises, such as weighted averaging based on local probabilities, unsharp masking techniques, and proposed combined techniques. As a result, the combined technique using the median filtering and edge masks in six directions is well suited to remove the noises as to as to preserve the edges. Experimental results and computational procedures are presented.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.14 no.1
• /
• pp.88-96
• /
• 1989

General measure in the reliability is the k-terminal reliability, which is the probability that the specified vertices are connected by the working edges. To compute the k-terminal reliability components are usually assumed to be statistically independent. In this study the modeling and analysis of the k-terminal reliability are investigated when dependency among components is considered. As the size of the network increases, the number of the joint probability parameter to represent the dependency among components is increasing exponentially. To avoid such a difficulty the structured-event-based-reliability model (SERM) is presented. This model uses the combination of the network topology (physical representation) and reliability block diagram (logical representation). This enables us to represent the dependency among components in a network form. Computational algorithms for the k-terminal reliability in SERM are based on the factoring algorithm Two features of the ractoring algorithm are the reliability preserving reduction and the privoting edge selection strategy. The pivoting edge selction strategy is modified by two different ways to tackle the replicated edges occuring in SERM. Two algorithms are presented according to each modified pivoting strategy and illustrated by numerical example.

• Korean Journal of Computational Design and Engineering
• /
• v.2 no.3
• /
• pp.150-160
• /
• 1997

Existing non-manifold data structures which use the ordered topological representation method, are designed based on a "Model" which is the highest topological entity. Their non-manifold information is always included in edges and vertices even if they are in the manifold situation. Thus they require large storage spaces than manifold data structures. The proposed data structure reduces its storage space by removing unnecessary information stored in edges and vertices. Topological information is classified into manifold and non-manifold information. The main non-manifold information is radial cycles and disk cycles. The proposed data structure always stores manifold information. For the non-manifold situation, the edge stores radial cycles, and the vertex stores disk cycles. The storage space can be reduced in the later stage of CAD design when the ratio of non-manifold to manifold entities is small.

• Structural Engineering and Mechanics
• /
• v.6 no.6
• /
• pp.583-612
• /
• 1998

A unified third-order laminate plate theory that contains classical, first-order and third-order theories as special cases is presented. Analytical solutions using the Navier and L$\acute{e}$vy solution procedures are presented. The Navier solutions are limited to simply supported rectangular plates while the L$\acute{e}$vy solutions are restricted to rectangular plates with two parallel edges simply supported and other two edges having arbitrary combination of simply supported, clamped, and free boundary conditions. Numerical results of bending and vibration for a number of problems are discussed in the second part of the paper.