• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1729-1730
• /
• 2008

In the industry, the automation of brazing system is very important using the vision senor and the edge detection of the bronze pipe. And also, the accurate coordination is needed for the finding of the precise location. In this paper, we propose an algorithm for the measurement of 3D information of the brazing material and the detection algorithm of soldering area using the camera and IR sensor. We use Canny edge detector in noisy environments. The experimental study shows that camera and IR sensor is useful for the measurement of distance in the brazing work.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.134-137
• /
• 2008

In this study, a computational analysis is conducted to investigate the effects of porous surfaces on the lift and drag forces of the flat plate. With the porous treatment, it is found that the strength of the Karman vortex as well as its influences over the trailing-edge surface are much weakened, resulting in significant reduction of the pressure fluctuations over the flat plate. The drag and lift coefficients are decreased by 85% and 18%, respectively, compared to the solid surface. The computed results also indicate that the size of the porous surface area does not have much influences but the back side of the flat plate has non-negligible effects on the interaction between the wall and the Karman vortex. As a result, the lift coefficient for the solid back side case is decreased only by 50.5% compared to the solid case and the drag coefficient is even increased by 65%.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.3
• /
• pp.115-122
• /
• 2008

Wu and Tsai's pixel-value differencing method and Chang and Tseng's side-match method are based on the theory that the number of bits which can be embedded is determined by the degree of the pixel's smoothness, or its proximity to the edge of the image. If pixels are located in the edge area, they may tolerate larger changes than those in smooth areas. However, both methods are subject to the fall off the boundary problem(FOBP). This study proposes a new scheme that can solve the FOBP. The experimental results demonstrate that the proposed method resolves the problem, and achieves a higher image quality index value than other methods.

• The Korean Journal of Applied Statistics
• /
• v.16 no.1
• /
• pp.129-140
• /
• 2003

This study was to develop a fruit sorting system using statistical image processing. Histogram was used to compare fruit colors to standard fruit color and edge detector using Wilcoxon test was used to calculate an accurate geometrical characteristics of fruit including perimeter, area, major axis and minor axis length and roundness. The experimental result obtained from using our system for sorting apples was presented.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.328-331
• /
• 2008

For the purpose of verifying the calculation, the rotor blade shall be subjected to test for the natural frequencies and the static loading within the scope of the assessment. This paper presents a full scale static test procedure of the rotor blade for certification by GL. This blade model is manes as KM24 designed for IEC type IA. The test and calculation values are all most similar. Also there is not founded any marks of cracks or buckling at the shell, and bonding area is T/E, L/E and shear web. Therefore, the test is successful and the rotor blade is satisfied the safety requirement at the maximum design load.

• Laser Solutions
• /
• v.18 no.3
• /
• pp.6-8
• /
• 2015

Finishing process includes deburring, polishing and edge radiusing. It improves the surface profile of specimen and eliminates the alien substance on surface. Deburring is the elimination process for debris of edges. Polishing lubricates surfaces by rubbing or chemical treatment. There are two types for electron finishing. The one is using pulse beam. The other is using the convergent and scanning electron beam. Pulse type device appropriates the large area process. But it does not control the beam dosage. Scanning type device has advantages for dosage control and edge deburring. We design the convergence and scan type. It has magnetic lenses for convergence and scan device for scanning beam. Magnetic lenses consist of convergent and objective lens. The lenses are designed by the specification(beam size and working distance). In this paper, we evaluate the convergence performance by pattern process. Also, we analysis the results and important factors for process. The important factors for process are beam size, pressure, stage speed and vacuum. These results will be utilized into systematizing pattern shape and the factors.

• Structural Engineering and Mechanics
• /
• v.44 no.3
• /
• pp.267-288
• /
• 2012

Free vibration analysis of arbitrary quadrilateral thick plates with internal columns and elastic edge supports is presented by using the powerful pb-2 Ritz method and Reddy's third order shear deformation plate theory. The computing domain of arbitrary quadrilateral planform is mapped onto a standard square form by coordinate transformation. The versatile pb-2 Ritz functions defined by the product of a two-dimensional polynomial and a basic function are taken to be the admissible functions. Substituting these displacement functions into the energy functional and minimizing the total energy by differentiation, leads to a typical eigenvalue problem, which is solved by a standard eigenvalue solver. Stiffness and mass matrices are numerically integrated over the plate by using Gaussian quadrature. The accuracy and efficiency of the proposed method are demonstrated through several numerical examples by comparison and convergency studies. A lot of numerical results for reasonable natural frequency parameters of quadrilateral plates with different combinations of elastic boundary conditions and column supports at any locations are presented, which can be used as a benchmark for future studies in this area.

• Corrosion Science and Technology
• /
• v.2 no.3
• /
• pp.135-140
• /
• 2003

The effect of temperature on stress corrosion cracking o f Al-brass used in vessel heat exchanger tube was studied in 3.5% NaCI + 0.1% $NH_4OH$ solution. The SCC test using a CDT(constant displacement test) and the specimens using a SEN(single edge notched) specimens. For setting the environment similar to working environment of a heat exchanger, the specimens was immersed in solution and solution flow onto the specimens were performed. The results are as follows : The latent time of stress corrosion crack occurrence gets shorter, as the temperature gets higher. Dezincification phase showed around the crack occupy wider range, as the temperature gets higher. Zn composition falls under 4% at the dezincifiction area.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.12
• /
• pp.3195-3201
• /
• 1994

In order to analytically predict tapping torque and thrust force in high speed tapping, a cutting model for main cutting edge with a uniformly restricted tool-chip contact area were developed. From this model equations are derived for the prediction of tapping torque given the cutting conditions, tap geometry, and an empirical factor which is related to the workmaterial. Computed values of torque is shown to compare favorably with those obtained from tapping tests on 16MnCr5. The applied torque about the cutting edge of teeth at lead chamfer is estimated respectively and it is shown that observed value is gradually decreased with following teeth.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.5
• /
• pp.75-82
• /
• 1998

Conventional vector quantization (VQ) codebook design methods have several drawbacks such as edge degradation and high computational complexity. In this paper, we first made activity coordinates from the horizonatal and the vertical activity of the input block. Then it is mapped on the 2-dimensional interconnected codebook, and the codebook is designed using kohonen self-organizing map (KSFM) learning algorithm after the search of a codevector that has the minumum distance from the input vector in a small window, centered by the mapped point. As the serch area is restricted within the window, the computational amount is reduced compared with usual VQ. From the resutls of computer simulation, proposed method shows a better perfomance, in the view point of edge reconstruction and PSNR, than previous codebook training methods. And we also obtained a higher PSNR than that of classified vector quantization (CVQ).