• Archives of Plastic Surgery
• /
• 제33권2호
• /
• pp.155-160
• /
• 2006

Although several reports have been introduced about dual plane augmentation mammaplasty, the description of periareolar approach dual plane augmentation mammaplasty was few. This article describes specific characteristics, and different classification and techniques for the periareolar dual plane breast augmentation while postoperative scars resulted from inframammary crease approach caused complaints. A total of 124 patients(248 breasts) had periareolar dual plane augmentation surgery from 1998 to 2004. Anatomic implants were used in 43 cases. Most of the patients were satisfied with the outcomes of periareolar dual plane augmentation. Periareolar dual plane augmentation mammaplasty adjusts implant and tissue relationships to ensure adequate soft-tissue coverage while optimizing implant-breast parenchymal dynamics to offer increased benefits and fewer faults compared to a single pocket location in a wide range of breast types with minimal scars. Two types of dual plane classifications are discussed in this study for the periareolar approach exclusively. The boundaries of retroglandular dissection remain constant, as the costal origin of pectoralis major are divided. Type A dual plane implies that the inferior edge of pectoralis muscle lies below the inferior areolar border, and type B dual plane implies that the inferior edge lies above the superior areolar border.

• International Journal of Advanced Culture Technology
• /
• 제3권1호
• /
• pp.68-77
• /
• 2015

This study was the use of the finite element method in the deep drawing process of a rectangular shell cup. The aim was to analyse the equivalent strain in the workpiece and to find out what happened to the disc blank sheet before the forming by stamping. The rectangular shell cup was $24{\times}30{\times}20$ mm. and made of 2mm.thick SUS 403 and SUS 304 stainless steel. There were 3 types of blank sheets: 1) square sheet 2) 45 degree angled edge cutting sheet 3) circular sheet. It was found out that the drawing up with the use of 3 types of blank sheet made of SUS 304 stainless steel had no risk in the workpiece. For the stamping of the rectangular shell that used a square sheet made of SUS 403 stainless steel, it was found out that there was no risk in the work piece, but with the use of 45 degree angled edge cutting sheet or round sheet, the work piece had a risk to be damaged.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.393-396
• /
• 2016

디지털 영상 처리는 지능적이고 효율적인 방법으로 처리, 분석하는 기술 분야이며, 다양한 응용 분야에 실용화되고 있다. 그러나 영상 데이터는 여러 가지 원인에 의해 잡음이 발생하고 있으며, 이러한 잡음들을 제거하기 위한 다양한 방법들이 연구되고 있다. 일반적으로 잡음은 원인과 형태에 따라 다양한 종류가 있으며, 복합잡음이 대표적이다. 따라서 본 논문에서는 영상에 첨가된 복합잡음을 효과적으로 제거하고 우수한 에지 보존 특성을 갖기 위해, 잡음 형태에 따라 스위칭하여 처리하는 에지 보존을 위한 변형된 스위칭 필터를 제안하였다.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• 제2권4호
• /
• pp.274-278
• /
• 2021

Road structures play an important role in collisions involving vehicles and wildlife. Our study aimed to determine the effect of various types of road structures on the risk associated with roadkill. We surveyed 50 previously identified roadkill hotspots, ranked from one to five according to roadkill density. We collected nine types of road structure data on each hotspot road section. Structures with similar characteristics were grouped together, resulting in five categories, namely, median barrier, high edge barrier, low edge barrier, speed, and visibility. We examined the existence of each road structure category at each hotspot rank. The cumulative link model showed that the absence of bottom blocked median barrier increased the roadkill hotspot rank. Our study concluded that a visual obstacle in the middle of roads by the median barrier decreases wildlife road crossing attempts and roadkill risk. We suggest that future roadkill mitigation plans should be established considering these characteristics.

• 패션비즈니스
• /
• 제26권5호
• /
• pp.135-152
• /
• 2022

This study aimed to evaluate the user experience of hearable devices for seniors and suggest possible development directions. A literature review, case study, and in-depth interviews were conducted. Based on the literature review, convenience, accessibility, transmissibility, wearability, aesthetics, and interest were determined as the user experience factors of hearable devices. Then, in-depth interviews were conducted with 12 participants aged 60 or older regarding four devices. Participants tried four different types of wireless earphones which were selected based on a case study: open-type, kernel-type, neckband-type, and earring-type. Regarding convenience, the participants preferred to carry small devices and regarding accessibility, participants responded positively for most product types. For transmissibility and wearability, there were differences depending on whether devices were put on correctly, but the participants preferred products that did not wholly block external sounds. For aesthetics, participants preferred small and cutting-edge designs. Interest was noticeable among those who had not used the devices before, and for stability, the neckband-type was the most preferred. Based on the results we suggest designing small cutting-edge designs and button-type assist devices, not blocking the external sound, providing a participation program, simplifying device functions, and establishing a method that can be combined with and stored in clothes and a delivery method that can signal danger.

• Geomechanics and Engineering
• /
• 제31권2호
• /
• pp.183-195
• /
• 2022

Under the effects of the near-field earthquakes, the incident angle of the incoming wave could be different. In this study, the influences of some parameters such as incident angle, basin edge, peak ground acceleration level of the bedrock motion as well as different clay types with different consistency on the amplification behavior of the shallow basins are investigated. To attain this goal, the numerical analyses of the basins filled with three different clay types are performed using a fully nonlinear method. The two dimensional models of the basins are subjected to a set of strong ground motions with different peak ground acceleration levels and three different incident angles of 30◦, 45◦ and 90◦ with respect to the horizontal axes. The results show the dominant effect of the obliquely subjected waves at most cases. The higher effect of the 45◦ incident angle on the basin response was concluded. In the other part of this study, the spectral amplification curves of the surface points were compared. It was seen that the maximum spectral amplification of different surface points occurs at different periods. Also, it is affected by the increase in the peak acceleration level of the incoming motions.

• 복식
• /
• 제66권7호
• /
• pp.124-138
• /
• 2016

The present study observes collaboration methods in which 3D printing was a part of the fashion manufacturing process, expression methods of such cases, and their ripple effects. As a result, the three types of collaborations between fashion designers and other industry fields, fashion brands and 3D printing companies, and fashion designers and artists. Case analysis results and ripple effects found according to each collaboration method were as follows. First, in collaborations found were between fashion designers and other industry fields, 3D printed fashion works with futuristic images were seen through the fusion of future industries, which claim to support cutting edge digital technology, and creative fashion design. As they were mainly collaborations between automobile industries with cutting edge images or digital related industries and fashion designers, they were expressed as a new form of experimental clothing, and were used as strategies to improve future corporate images of the high tech industry. Second, in collaborations between fashion brands and 3D printing technology businesses, the sporting good brands and the shoe industry attempted to let their products be known through the promotion of functional material or ergonomic technology. While they emphasize practicality by mainly using flexible material, they were mainly proposed as functional sporting goods for famous players or as shoe accessories, so methods are still used for public distribution as brand promoting marketing strategies. Third, with collaborations between fashion designers and artists, creative pieces were shown through the grafting of 3D printing technology, the artistry of artists, and the experimentation of fashion designers. In particular, the innovative value of fashion as art was created through the union of the artistic 3D modeling technology support of artists and the creativity of designers. Like this, 3D printing fashion can graft the cutting edge nature of fashion to other industry fields through collaborations, enhancing pacesetting images, and in the fashion field, it can improve possibilities for innovations in the fashion industry through the support of 3D printing technology businesses and artists, raising expectations towards future human living.

• 한국통신학회논문지
• /
• 제24권8B호
• /
• pp.1480-1489
• /
• 1999

본 논문에서는 블록 기반 DCT 부호화 방식의 단점인 블록화 현상을 제거하기 위하여 MSDS 방법을 개선한 후 처리 기법을 제안한다. MSDS방법의 문제점인 예측된 DCT 계수값의 범위를 제한하기 위하여 입력 영상의 블록 경계 화소차 분포를 규정할 수 있는 OSLD(Overlapped Sub-Laplacian Distribution)를 정의한다. 블록화 현상은 블록간의 기울기를 이용하여 불연속 정도를 측정함으로써 정량화 되고, 정량화 된 값을 최소화하도록 양자화 오류값을 예측한다. OSLD를 이용하여 각 블록들을 네 가지 형태로 분류하고 이를 에지 부류와 평탄 부류로 구분한다. 에지 부류로 판별된 블록에서는 예측된 양자화 오류의 범위가 해당되는 양자화 간격보다 크면 이 간격으로 예측된 양자화 오류를 보정한다. 본 방법을 사용하여 실험 영상에서 블록화 현상을 제거할 때 기존의 MSDS 방법에서 요구하였던 입력 영상에 따라 실험적으로 문턱값을 설정하였던 문제점을 해결하고, PSNR 값을 영상에 따라 0.1∼0.3 dB 정도 향상시키면서 시각적으로 화질을 향상시킬 수 있다.

• Journal of Ecology and Environment
• /
• 제41권10호
• /
• pp.290-301
• /
• 2017

Background: Forest edges create distinctive ecological space as adjacent constituents, which distinguish between different ecosystems or land use types. These edges are made by anthropogenic or natural disturbance and affects both abiotic and biotic factors gradually. This study was carried out to assess edge effects on disturbed landscape at the pine-dominated clear-cut area in a genetic resources reserve in Uljin-gun, eastern Korea. This study aims to estimate the distance of edge influence by analyzing changes of abiotic and biotic factors along the distance from forest edge. Further, we recommend forest management strategy for sustaining healthy forest landscapes by reducing effects of deforestation. Results: Distance of edge effect based on the abiotic factors varied from 8.2 to 33.0 m. The distances were the longest in $Mg^{2+}$ content and total nitrogen, $K^+$, $Ca^{2+}$ contents, canopy openness, light intensity, air humidity, $Na^+$ content, and soil temperature followed. The result based on biotic factors varied from 6.8 to 29.5 m, coverage of tree species in the herb layer showed the longest distance and coverage of shrub plant in the herb layer, evenness, species diversity, total coverage of herb layer, and species richness followed. As the result of calculation of edge effect by synthesizing 26 factors measured in this study, the effect was shown from 11.0 m of the forest interior to 22.4 m of the open space. In the result of stand ordination, Rhododendron mucronulatum, R. schlippenbachii, and Fraxinus sieboldiana dominated arrangement of forest interior sites and Quercus mongolica, Vitis amurensis, and Rubus crataegifolius dominated spatial distribution of the open area plots. Conclusions: Forest interior habitat lies within the influence of both abiotic and biotic edge effects. Therefore, we need a forest management strategy to sustain the stability of the plant and further animal communities that depend on its stable conditions. For protecting forest interior, we recommend selective logging as a harvesting method for minimizing edge effects by anthropogenic disturbance. In fact, it was known that selective logging contributes to control light availability and wind regime, which are key factors affecting microclimate. In addition, ecological restoration applying protective planting for the remaining forest in the clear-cut area could contribute to prevent continuous disturbance in forest interior.

• 대한기계학회논문집A
• /
• 제36권12호
• /
• pp.1619-1625
• /
• 2012

전기강판은 모든 형태의 변압기나 모터의 코어 소재로 사용되고 냉간압연 공정에 의해 생산된다. 본 논문에서는 냉간압연 중에 발생하는 전기강판 에지에서의 파단을 예측할 수 있는 손상역학에 기초한 접근법을 제시할 것이다. 손상개시 판단조건으로 수직 인장응력 조건을 도입하였고 손상진전 기법으로 손상 에너지법을 채용하였다. 전기강판 에지의 초기 노치로부터 크랙 발생과 전파 모사를 위해 유한요소법을 이용하였다. 유한요소해석에서 요구되는 물성치는 일반적인 판형 시편과 노치가 있는 판형 시편을 이용하여 인장 테스트를 통해서 확보하였다. 에지 크랙은 롤 바이트의 입측에서 시작되고 롤 바이트 출측에서 급격하게 진전되는 것으로 나타났다. 초기 노치의 길이와 강판의 전방 텐션릴 하중이 커짐에 따라 에지 크랙의 성장길이는 커지는 것으로 나타났다.